Mico 12 - Baby products MAXI-COSI - Free user manual and instructions
Find the device manual for free Mico 12 MAXI-COSI in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Type of product | Infant Car Seat |
| Brand | Maxi-Cosi |
| Model | Mico 12 |
| Overall dimensions (L x W x H) | 28 x 17 x 15 inches |
| Weight | 9.5 lbs (seat only) |
| Maximum child weight | 35 lbs |
| Maximum child height | 32 inches |
| Orientation | Rear-facing only |
| Installation method | Vehicle belt or base with LATCH |
| Harness type | 5-point harness |
| Handle positions | Carry, rocking, and stationary |
| Canopy | Removable, extendable sun canopy |
| Side impact protection | Built-in side impact panels |
| Seat insert | Removable infant insert for newborns |
| Compatibility | Compatible with Maxi-Cosi strollers |
| Cleaning instructions | Harness and buckle wipe clean; fabric cover machine wash cold, hang dry |
| Expiration | 6 years from date of manufacture |
| Safety standards | Meets or exceeds US FMVSS 213 and Canada CMVSS 213 |
| Spare parts | Replacement base, canopy, harness inserts available separately |
| Manual included | Yes, English and French |
Frequently Asked Questions - Mico 12 MAXI-COSI
What is the weight limit for the Maxi-Cosi Mico 12?
The maximum child weight is 35 lbs (15.9 kg), and the maximum height is 32 inches (81 cm).
Can this car seat be used without a base?
Yes, the Mico 12 can be installed without a base using the vehicle seat belt. Always follow the manual for proper installation.
How do I clean the fabric cover?
Remove the fabric cover and machine wash it in cold water on a gentle cycle. Hang to dry; do not use bleach or fabric softener.
What is the expiration date of this car seat?
The Maxi-Cosi Mico 12 expires 6 years from the date of manufacture. Check the label on the seat for the exact date.
Is the Mico 12 compatible with Maxi-Cosi strollers?
Yes, it is compatible with all Maxi-Cosi strollers that accept infant car seats, using the included adapters.
How do I adjust the harness height?
Loosen the harness, then move the chest clip and harness straps to the next slot at or below your baby's shoulders. Re-tighten securely.
Can I use this seat for a newborn?
Yes, it comes with an infant insert for newborns weighing 4-11 lbs (1.8-5 kg). Use the insert until the baby's shoulders reach the lowest harness slots.
What type of vehicle seat belt is needed?
A lap belt or lap-shoulder belt combination works. Do not use with a lap belt that is not locked. Refer to the manual for specific belt routing.
How do I recline the seat?
The Mico 12 has a built-in recline adjustment. Press the recline button and move the base to the desired position for proper angle.
Where can I buy spare parts?
Spare parts such as the base, canopy, and harness inserts are available on the Maxi-Cosi official website or authorized retailers.
User questions about Mico 12 MAXI-COSI
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Baby products in PDF format for free! Find your manual Mico 12 - MAXI-COSI and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Mico 12 by MAXI-COSI.
USER MANUAL Mico 12 MAXI-COSI
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : MAXI-COSI
Model : Mico 12
Category : Baby products