ST 976 T - Snow blower STIGA - Free user manual and instructions
Find the device manual for free ST 976 T STIGA in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Snow Blower |
| Brand | STIGA |
| Model | ST 976 T |
| Engine Type | 4-stroke, gasoline |
| Engine Power | 6.5 HP |
| Displacement | 208 cc |
| Clearing Width | 24 inches (61 cm) |
| Clearing Height | 20 inches (51 cm) |
| Chute Control | Remote, 180° rotation |
| Drive System | 6 forward speeds, 1 reverse |
| Wheel Type | Pneumatic tires |
| Headlight | LED, 2 bulbs |
| Electric Start | Yes, plug-in |
| Fuel Tank Capacity | 1.06 gal (4 L) |
| Oil Capacity | 0.63 qt (0.6 L) |
| Weight | 110 lbs (50 kg) |
| Dimensions (L x W x H) | 33 x 24 x 25 in (84 x 61 x 63.5 cm) |
| Maintenance Intervals | Check oil before each use; sharpen blades annually |
| Safety Features | Operator presence control, safety key, dead man switch |
| Spare Parts Availability | Authorized dealers and online retailers |
| Warranty | 2 years limited |
Frequently Asked Questions - ST 976 T STIGA
How do I start the snow blower?
Check oil and fuel levels. Turn fuel valve to ON, set choke to CLOSE, press the primer bulb 3 times. Insert safety key, then either use electric start (plug into outlet) or pull recoil starter. Once engine warms, open choke.
What type of oil should I use?
Use SAE 5W-30 4-stroke engine oil for cold weather. Change after first 5 hours, then every season.
How do I adjust the chute direction?
The remote chute control allows you to rotate the chute up to 180 degrees. Turn the crank clockwise to rotate right, counterclockwise for left.
Why does the snow blower not throw snow far?
Clear snow buildup in the chute. Check the impeller and auger for damage. Ensure the engine is running at full throttle. Worn-out scraper blade may reduce performance.
How often should I replace the spark plug?
Inspect the spark plug annually. Replace if electrodes are worn or damaged. Recommended gap: 0.030 in (0.76 mm).
Can I use regular gasoline?
Use clean, fresh unleaded gasoline with a minimum octane rating of 87. Do not use ethanol blends above 10% to prevent engine damage.
What is the breaking-in period?
First 5 hours: avoid heavy loads, vary speeds. After, change oil and check all fasteners. Then normal operation.
How do I store the snow blower after season?
Drain fuel or add stabilizer. Run engine until it stops. Remove spark plug, pour 1 tbsp oil into cylinder, pull starter slowly. Clean exterior, lubricate moving parts, and store in dry place.
The engine won't start. What could be wrong?
Check safety key is inserted (position ON). Ensure fuel valve is open, choke is closed. Check spark plug connection and replace if wet or fouled. Verify fuel is fresh.
How do I replace the auger blades?
Disconnect spark plug. Remove the shear pins and bolts securing the auger assembly. Replace worn blades with genuine STIGA parts. Reassemble in reverse order, using new shear pins.
User questions about ST 976 T STIGA
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Snow blower in PDF format for free! Find your manual ST 976 T - STIGA and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. ST 976 T by STIGA.
USER MANUAL ST 976 T STIGA
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : STIGA
Model : ST 976 T
Category : Snow blower