XLED Protect S - Lamp STEINEL - Free user manual and instructions
Find the device manual for free XLED Protect S STEINEL in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Outdoor LED pole light with motion detector |
| Brand | Steinel |
| Model | XLED Protect S |
| Dimensions (H x W x D) | 240 x 140 x 160 mm |
| Weight | 0.4 kg |
| Power supply | 230 V / 50 Hz |
| LED power | 10 W |
| Luminous flux | 840 lm |
| Color temperature | 3000 K / 4000 K (selectable) |
| Detection angle | 120° |
| Detection range | 12 m |
| Protection class | IP44 |
| Twilight sensor | Yes, adjustable |
| Adjustable lighting duration | 5 s to 15 min |
| Main functions | Motion detection, automatic lighting, standby mode |
| Care and cleaning | Clean with a non-abrasive damp cloth. Do not use harsh cleaning agents. |
| Safety | Do not open the device. Dangerous voltage. Use only outdoors. |
| Spare parts and repairability | No user-serviceable parts. Contact Steinel customer service. |
| Ingress protection rating | IP44 (protected against water splashes) |
| Warranty | 2 years manufacturer warranty |
Frequently Asked Questions - XLED Protect S STEINEL
How to adjust the detection range?
Turn the RANGE knob clockwise to increase the range up to 12 m, counterclockwise to reduce it.
How to adjust the lighting duration?
Use the TIME potentiometer to set the duration from 5 seconds to 15 minutes after detection.
What to do if the lamp does not turn on?
Check the power supply, that the twilight sensor is not in daylight, and that the detector is not obstructed. If the problem persists, contact customer service.
Is it normal for the lamp to flicker?
A slight flicker at startup is normal. Continuous flickering may indicate overload or a defect. Reduce power or contact support.
Can I use this lamp indoors?
The device is designed for outdoor use (IP44). Indoor use is possible but not recommended due to the twilight sensor.
How to change the light color?
A selector under the cover allows choosing between 3000 K (warm white) and 4000 K (neutral white). Turn off the device before handling.
The lamp turns on during the day, why?
The twilight threshold is incorrectly set. Turn the LUX knob towards the moon symbol for activation in lower light, or towards the sun for more light.
How to clean the lamp?
Use a soft, damp cloth. Never use solvents or abrasive detergents. Then wipe with a dry cloth.
What to do if the detector does not respond?
Check that the lamp is powered, the sensor is not covered, and the ambient temperature is within the operating range. Perform a detection test by moving in front of it.
Where to find spare parts?
There are no spare parts available for this model. In case of failure, please contact the Steinel after-sales service or an authorized dealer.
User questions about XLED Protect S STEINEL
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Lamp in PDF format for free! Find your manual XLED Protect S - STEINEL and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. XLED Protect S by STEINEL.
USER MANUAL XLED Protect S STEINEL
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : STEINEL
Model : XLED Protect S
Category : Lamp