P1P6MT2L - Car charger BLAUPUNKT - Free user manual and instructions

Find the device manual for free P1P6MT2L BLAUPUNKT in PDF.

BLAUPUNKT P1P6MT2L - Car charger
📄 114 pages English EN ⬇ Download 💬 AI Question ❓ 10 questions ⚙️ Specs
Notice BLAUPUNKT P1P6MT2L - page 4
4 / 114
Pick your language and provide your email: we'll send you a specifically translated version.
BrandBlaupunkt
ModelP1P6MT2L
Product typeCigarette lighter charger
Power input12V/24V DC (cigarette lighter)
Output voltage5V DC (USB)
Total output current2.4 A (max)
Number of USB ports2
Dimensions (L x W x H)5.6 x 3.2 x 2.8 cm
Weight28 g
Cable lengthIntegrated (non-removable)
Protection functionsProtection against overvoltage, overcurrent, short circuit, and overheating
LED indicatorYes (power indicator)
Operating temperature-10°C to 60°C
Housing materialFlame-retardant ABS plastic
Care and cleaningClean with a soft, dry cloth. Do not use chemical products.
SafetyComplies with CE standards. Use only with a 12V/24V cigarette lighter socket.
Spare parts and repairabilityNot user-repairable. No spare parts available.
Warranty2 years

Frequently Asked Questions - P1P6MT2L BLAUPUNKT

What type of vehicle does the Blaupunkt P1P6MT2L charger support?
This charger is compatible with all vehicles equipped with a 12V or 24V cigarette lighter socket, such as cars, trucks, boats, and RVs.
Can I charge multiple devices at the same time?
Yes, the charger has 2 USB ports that can be used simultaneously to charge two devices, with a maximum total current of 2.4 A.
Is the charger compatible with fast charging?
No, this model offers standard charging at 5V/2.4A maximum. It is not compatible with fast charging technologies like Quick Charge or USB-C PD.
What does the LED indicator mean?
The blue LED lights up when the charger is properly connected and powered. If it does not light up, check the cigarette lighter socket and the vehicle's fuse.
Does the charger heat up normally?
Slight warming is normal during use. However, if the charger becomes very hot to the touch, stop using it and check that it is not obstructed or defective.
Can I use the charger with a 220V transformer?
No, the charger is designed only for 12V/24V input via the cigarette lighter socket. Using it on 220V would damage it.
What to do if the charger does not work?
First check that the vehicle's cigarette lighter socket is powered (some models cut power when stopped). Then test another device on the same socket. If nothing works, the charger or vehicle fuse may be blown.
Is the charger's fuse replaceable?
No, the fuse is integrated and not replaceable. In case of failure, the charger must be replaced.
Can I leave the charger plugged in permanently?
It is recommended to unplug the charger when not in use to avoid draining the vehicle's battery and for safety reasons.
Where can I find the original manual?
The original manual is available for free download on the website notice-facile.com in several languages, including French.

User questions about P1P6MT2L BLAUPUNKT

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

Your email remains private: it is only used to notify you if someone answers your question.

No questions yet. Be the first to ask one.

Download the instructions for your Car charger in PDF format for free! Find your manual P1P6MT2L - BLAUPUNKT and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. P1P6MT2L by BLAUPUNKT.

USER MANUAL P1P6MT2L BLAUPUNKT

EV Portable Charger User Manual

BLAUPUNKT P1P6MT2L - 1

Enjoy it.

Please read this instruction carefully before using the product.

CONTENTS ENGLISHINDHOLDSFORTEGNELSE DANSK/NORSKINHALTSVERZEICHNIS DEUTSCH
01-1011-2021-30
INHOUD NEDERLANDSCONTENIDOS ESPAÑOLSISÄLTÖ SUOMALAINEN
31-4041-5051-60
CONTENU FRANÇAISEINDICE ITALIANOSPIS TREŚCI POLSKI
61-7071-8081-90
ÍNDICE PORTOGHESEINNEHÅLL SVENSK
91-100101-110

EV Portable Charger

Please carefully read the following instructions before charging your Electrical Vehicle, be aware of the hazards involved with electrical circuitry and standard practices for preventing accidents.

Contents

Introduction to the Portable EV Charger (Mode 2) 02 Explanation of the operating display and technical parameters 03 Explanation of the "1/2" and "1/2!" symbol 05

Use 06 Use of the charger - start charging 06 Use of the charger - stop charging 07

Display Light Status 08

Function 09 Switch current 09 Timer function 10

BLAUPUNKT P1P6MT2L - Contents - 1

CAUTION

  • Use the power source with external upstream Circuit Breaker.
  • Make sure the charger is used in a safe, secure place and well out of the reach of young children or pets.
  • Please use the charger in a dry, well ventilated and secure place. Keep well out of reach of young children or pets. Avoid water pouring directly onto the power plug. · Do not open the enclosure while charging or with the power on. · Do not maliciously damage the product. · Never use with an adapter. Shall only be plugged directly into a fixed/wall socket.

Introduction to the Portable EV Charger (Mode 2)Line drawing of an electric vehicle charging plug with cable and terminal connector (no text or symbols)

Line drawing of an electric vehicle charging plug with cable and terminal (no text or symbols)

Specifications

ModelPower Supply TypeCable Total LengthVoltageCurrentConnector Type
P1PM2T2Single-phase8m200-250V8/10/13/16AT2
P1PM2T1Single-phase8m200-250V8/10/13/16AT1
P1PM2T2CSingle-phase8m200-250V8/10/13/16AT2
P3PM2T2Three-phase8m380-450V8/10/13/16AT2
P1PM2T2BSSingle-phase8m200-250V8/10/13AT2
P1PM2T1BSSingle-phase8m200-250V8/10/13AT1
P3P6MT2Three-phase6m380-450V8/10/13/16AT2
P1P6MT2Single-phase6m200-250V8/10/13/16AT2
P1PM2T2LSingle-phase8m200-250V8/10/13/16AT2
P1PM2T2CHSingle-phase8m200-250V8/10AT2
P1PM2T2DKSingle-phase8m200-250V6AT2

1 Model: P3PM2T2 / P3P6MT2Charging Time: 00:00:03 20°C 405V 0.89kW 16A 3.9A 0.002kWh TIME AMPS

Explanation of the operating display

Power light405VVoltage
Charge lamp0.89kwPower
Trouble lamp16ARated current
BLAUPUNKT P1P6MT2L - CAUTION - 4Current switch button3.9AConstant current
00:00:03Charging time0.002kwhElectricity consumption
BLAUPUNKT P1P6MT2L - CAUTION - 5TemperatureTIMETime function button
PE Detection(Earthing Detection) 1/2! The upstream PE has not been detected and the charging cannot be started.

Control box:

BLAUPUNKT AMTS Control Panel Control Panel TRAP

Technical Parameters

Dimensions (L×W×H)260×100×72.5 mm
Weight3Phase: 3.35 kg / 2.9 kg
Protection Degree (Control box)IP65
Operating Temperature-30°C to +50°C

1 Model: P1PM2T2 / P1PM2T1 / P1PM2T2C / P1PM2T2BS / P1PM2T1BS P1P6MT2 / P1PM2T2L / P1PM2T2CH / P1PM2T2DK

Charging Time: 00:00:03 20°C 245V 0.89kW 16A 3.9A 0.002kWh TIME AMPS

Explanation of the operating display

Power light245VVoltage
Charge lamp0.89kwPower
Trouble lamp16ARated current
Current switch button3.9AConstant current
00:00:03Charging time0.002kwhElectricity consumption
20°CTemperatureTIMETime function button
PE Detection(Earthing Detection) ± ! The upstream PE has not been detected and the charging cannot be started.

Control box:

BLAUPUNKT AUTO 3.000Ω 1.000Ω TENF

Technical Parameters

Dimensions (L×W×H)260×100×72.5 mm
Weight1Phase: 2.41 kg / 2.15 kg
Protection Degree (Control box)IP65
Operating Temperature-30°C to +50°C

Users must check the PE detection mark "1/2" on the display before each use. (PE meaning protective conductor)

  1. If the mark "1/2" is displayed on the screen, it indicates that the charger shall verify the presence of the upstream PE, and the charging process will only begin when the upstream PE is present.

ATTENTION: if the mark "1/2!" appears, it means that the upstream PE has not been detected and the charging cannot be started.

  1. If the mark "1/2" is NOT displayed on the screen, it indicates that the charger has no function to verify the presence of the upstream PE, and can be charged whether or not the PE can be detected.

ATTENTION: It is strongly recommended that users charge under condition 1. Condition 2 has certain security risks due to the absence of PE. So condition 2 should only be used under the premise that users can ensure safety and in special circumstances where PE does not exist in the power system.

Deactivate PE Detection: Press "Amps+Time" for 4s together.

Reactivate PE Detection: Press "Amps+Time" for 4s together.

Start Charging

StepIllustration Operation
1.BLAUPUNKT P1P6MT2L - Start Charging - 1Insert the plug into the correct power supply socket.
BLAUPUNKT P1P6MT2L - Start Charging - 2
2.BLAUPUNKT P1P6MT2L - Start Charging - 3Remove the protective cap and fully insert the charging connector into the EV charging port.
3.BLAUPUNKT P1P6MT2L - Start Charging - 4Start charging

BLAUPUNKT P1P6MT2L - Start Charging - 5

BLAUPUNKT P1P6MT2L - Start Charging - 6

DANGER

Do not use product if it appears to be damaged or the cable is broken. Do not disassemble or assemble the connector and change the internal parts. Do not clean the products using chemicals or cleaning the EV car while charging.

Stop Charging

Step Illustration Operation
1.BLAUPUNKT P1P6MT2L - DANGER - 1Disconnect the plug from the power supply socket.
BLAUPUNKT P1P6MT2L - DANGER - 2
2.BLAUPUNKT P1P6MT2L - DANGER - 3Disconnect the charging connector from the EV car.
3.BLAUPUNKT P1P6MT2L - DANGER - 4Close the protective shell of EV charging port, then cover the protective cap of the charging connector.
4.BLAUPUNKT P1P6MT2L - DANGER - 5Put the portable charger into the bag.

Display Light Status

Indicator Light Indicator LightStatusStatus
OffBLAUPUNKT P1P6MT2L - DANGER - 6BlinkBLAUPUNKT P1P6MT2L - DANGER - 7On
OffBLAUPUNKT P1P6MT2L - DANGER - 8Blink[0000]On
OffBLAUPUNKT P1P6MT2L - DANGER - 9Blink[00441]On

Operation:

1Power Off[STWG][1708][H90X]
2CheckBLAUPUNKT P1P6MT2L - DANGER - 10BLAUPUNKT P1P6MT2L - DANGER - 11BLAUPUNKT P1P6MT2L - DANGER - 12
3StandbyBLAUPUNKT P1P6MT2L - DANGER - 13BLAUPUNKT P1P6MT2L - DANGER - 14[24KD]
4Connected[5322]BLAUPUNKT P1P6MT2L - DANGER - 15[Y580]
5Charging[06VY][T4TS][426T]
6Charge CompleteBLAUPUNKT P1P6MT2L - DANGER - 16BLAUPUNKT P1P6MT2L - DANGER - 17[2XDT]

Trouble shooting:

1CP ErrorBLAUPUNKT P1P6MT2L - DANGER - 18BLAUPUNKT P1P6MT2L - DANGER - 19BLAUPUNKT P1P6MT2L - DANGER - 20
2Relay ErrorBLAUPUNKT P1P6MT2L - DANGER - 21BLAUPUNKT P1P6MT2L - DANGER - 22BLAUPUNKT P1P6MT2L - DANGER - 23
3Over/Under VoltageBLAUPUNKT P1P6MT2L - DANGER - 24BLAUPUNKT P1P6MT2L - DANGER - 25[08KH]
4Over current protectionBLAUPUNKT P1P6MT2L - DANGER - 26BLAUPUNKT P1P6MT2L - DANGER - 27BLAUPUNKT P1P6MT2L - DANGER - 28
5Electric leakage protection[TOXX]BLAUPUNKT P1P6MT2L - DANGER - 29[TX43]
6No ground connectionBLAUPUNKT P1P6MT2L - DANGER - 30BLAUPUNKT P1P6MT2L - DANGER - 31BLAUPUNKT P1P6MT2L - DANGER - 32
7Temperature warning[0235]BLAUPUNKT P1P6MT2L - DANGER - 33BLAUPUNKT P1P6MT2L - DANGER - 34
8Persistent high temperatureBLAUPUNKT P1P6MT2L - DANGER - 35BLAUPUNKT P1P6MT2L - DANGER - 36BLAUPUNKT P1P6MT2L - DANGER - 37

Switch Current:

BLAUPUNKT P1P6MT2L - Switch Current: - 1

CAUTION

In order to switch charging current, please make sure the power plug is firmly inserted into the socket and plug for the EV vehicle is disconnected.

Step Illustration Status
1. Insert the plug into the correct power supply socket.BLAUPUNKT P1P6MT2L - CAUTION - 1Ready
BLAUPUNKT P1P6MT2L - CAUTION - 2
2. Press the "Amps" switch button for 2 seconds.BLAUPUNKT P1P6MT2L - CAUTION - 3Enter setting the switch current mode
3. Continue to press the button briefly.The current will be changed. (switch between 8-10-13-16A).BLAUPUNKT P1P6MT2L - CAUTION - 4Setting the current of User's request
4. Press the button for 2s again.BLAUPUNKT P1P6MT2L - CAUTION - 5Setting successfully

Please complete setting within 4 seconds at each step, otherwise the feature setting will fail.

Timer function:

BLAUPUNKT P1P6MT2L - Timer function: - 1

CAUTION

In order to switch charging current, please make sure the power plug is firmly inserted into the socket and the plug for EV vehicle is disconnected.

Step Illustration Status
1. Insert the plug into the correct power supply socket.BLAUPUNKT P1P6MT2L - CAUTION - 1Ready
BLAUPUNKT P1P6MT2L - CAUTION - 2
2. Press the "Time" switch button for 2 seconds.BLAUPUNKT P1P6MT2L - CAUTION - 3Enter setting the delay time mode
3. Continue to press the button briefly.The time will be changed.(Switch between1/2/4/6/8/10H).BLAUPUNKT P1P6MT2L - CAUTION - 4Setting the delay time of User's request
4. Press the button for 2s again.BLAUPUNKT P1P6MT2L - CAUTION - 5Setting successfully

Please complete setting within 4 seconds at each step, otherwise the feature setting will fail.

Notice:

In case you want to cancel the timer setting - you can use one of the two options below:

  1. Directly disconnect the plug from the outlet socket.
  2. Press the Time button for 5s.

Portable EV Charger

Line drawing of an electric vehicle charging plug with cable and terminal (no text or symbols)

Specifications

ModelStrømforsyning stypeSamlet kabellængdeSpændingNominel strømStikforbindelse stype
P1PM2T2Enfaset8m200-250V8/10/13/16AT2
P1PM2T1Enfaset8m200-250V8/10/13/16AT1
P1PM2T2CEnfaset8m200-250V8/10/13/16AT2
P3PM2T2Trefaset8m380-450V8/10/13/16AT2
P1PM2T2BSEnfaset8m200-250V8/10/13AT2
P1PM2T1BSEnfaset8m200-250V8/10/13AT1
P3P6MT2Trefaset6m380-450V8/10/13/16AT2
P1P6MT2Enfaset6m200-250V8/10/13/16AT2
P1PM2T2LEnfaset8m200-250V8/10/13/16AT2
P1PM2T2CHEnfaset8m200-250V8/10AT2
P1PM2T2DKEnfaset8m200-250V6AT2

1 Model: P3PM2T2 / P3P6MT2Charging Time: 00:00:03 20°C 405V 0.89kW 16A 3.9A 0.002kWh TIME AMPS

Line drawing of an electric vehicle charging plug with cable and terminal (no text or symbols)

Technical Data

ModellStromver sorgungsartGesamtkab ellängeSpannungNennstromAnschlusstyp
P1PM2T2Einphasen8m200-250V8/10/13/16AT2
P1PM2T1Einphasen8m200-250V8/10/13/16AT1
P1PM2T2CEinphasen8m200-250V8/10/13/16AT2
P3PM2T2Dreiphasen8m380-450V8/10/13/16AT2
P1PM2T2BSEinphasen8m200-250V8/10/13AT2
P1PM2T1BSEinphasen8m200-250V8/10/13AT1
P3P6MT2Dreiphasen6m380-450V8/10/13/16AT2
P1P6MT2Einphasen6m200-250V8/10/13/16AT2
P1PM2T2LEinphasen8m200-250V8/10/13/16AT2
P1PM2T2CHEinphasen8m200-250V8/10AT2
P1PM2T2DKEinphasen8m200-250V6AT2

405V

Line drawing of an electric vehicle charging plug with cable and terminal (no text or symbols)

Specifications

ModelType voedingsspanningTotale lengte van de kabelSpanningNominale stroomType van aansluiting
P1PM2T2Een-fase8m200-250V8/10/13/16AT2
P1PM2T1Een-fase8m200-250V8/10/13/16AT1
P1PM2T2CEen-fase8m200-250V8/10/13/16AT2
P3PM2T2Driefase8m380-450V8/10/13/16AT2
P1PM2T2BSEen-fase8m200-250V8/10/13AT2
P1PM2T1BSEen-fase8m200-250V8/10/13AT1
P3P6MT2Driefase6m380-450V8/10/13/16AT2
P1P6MT2Een-fase6m200-250V8/10/13/16AT2
P1PM2T2LEen-fase8m200-250V8/10/13/16AT2
P1PM2T2CHEen-fase8m200-250V8/10AT2
P1PM2T2DKEen-fase8m200-250V6AT2

1 Model: P3PM2T2 / P3P6MT2Charging Time: 00:00:03 20°C 405V 0.89kW 16A 3.9A 0.002kWh TIME AMPS

Line drawing of an electric vehicle charging plug with cable and terminal (no text or symbols)

Specifications

ModeloTipo de fuente de alimentaciónLongitud total del cableVoltajeCorriente nominalTipo de conector
P1PM2T2Monofásica8m200-250V8/10/13/16AT2
P1PM2T1Monofásica8m200-250V8/10/13/16AT1
P1PM2T2CMonofásica8m200-250V8/10/13/16AT2
P3PM2T2Trifásica8m380-450V8/10/13/16AT2
P1PM2T2BSMonofásica8m200-250V8/10/13AT2
P1PM2T1BSMonofásica8m200-250V8/10/13AT1
P3P6MT2Trifásica6m380-450V8/10/13/16AT2
P1P6MT2Monofásica6m200-250V8/10/13/16AT2
P1PM2T2LMonofásica8m200-250V8/10/13/16AT2
P1PM2T2CHMonofásica8m200-250V8/10AT2
P1PM2T2DKMonofásica8m200-250V6AT2

1 Model: P3PM2T2 / P3P6MT2Charging Time: 00:00:03 20°C 405V 0.89kW 16A 3.9A 0.002kWh TIME AMPS

Line drawing of an electric vehicle charging plug with cable and terminal (no text or symbols)

Technical Data

Technical parameters

Line drawing of an electric vehicle charging plug with cable and terminal (no text or symbols)

Specifications

ModèleType d'alimentation électriqueLongueur totale du câbleTensionCourant nominalType de connecteur
P1PM2T2Monophasé8m200-250V8/10/13/16AT2
P1PM2T1Monophasé8m200-250V8/10/13/16AT1
P1PM2T2CMonophasé8m200-250V8/10/13/16AT2
P3PM2T2Triphasé8m380-450V8/10/13/16AT2
P1PM2T2BSMonophasé8m200-250V8/10/13AT2
P1PM2T1BSMonophasé8m200-250V8/10/13AT1
P3P6MT2Triphasé6m380-450V8/10/13/16AT2
P1P6MT2Monophasé6m200-250V8/10/13/16AT2
P1PM2T2LMonophasé8m200-250V8/10/13/16AT2
P1PM2T2CHMonophasé8m200-250V8/10AT2
P1PM2T2DKMonophasé8m200-250V6AT2

1 Model: P3PM2T2 / P3P6MT2Charging Time: 00:00:03 20°C 405V 0.89kW 16A 3.9A 0.002kWh TIME AMPS

Line drawing of an electric vehicle charging plug with cable and terminal (no text or symbols)

Characteristics

ModelloTipo di aliment. elettricaLunghezza totale del cavoTensioneCorrente nominaleTipo di connettore
P1PM2T2Monofase8m200-250V8/10/13/16AT2
P1PM2T1Monofase8m200-250V8/10/13/16AT1
P1PM2T2CMonofase8m200-250V8/10/13/16AT2
P3PM2T2Trifase8m380-450V8/10/13/16AT2
P1PM2T2BSMonofase8m200-250V8/10/13AT2
P1PM2T1BSMonofase8m200-250V8/10/13AT1
P3P6MT2Trifase6m380-450V8/10/13/16AT2
P1P6MT2Monofase6m200-250V8/10/13/16AT2
P1PM2T2LMonofase8m200-250V8/10/13/16AT2
P1PM2T2CHMonofase8m200-250V8/10AT2
P1PM2T2DKMonofase8m200-250V6AT2

1 Model: P3PM2T2 / P3P6MT2

Charging Time: 00:00:03 20°C 405V 0.89kW 16A 3.9A 0.002kWh TIME AMPS

Technical parameters

Dimensioni (L × P × H)260 × 100 × 72.5 mm
PesoTrifase: 3.35 kg / 2.9 kg
Grado di protezione( Control box )IP65
Temperatura d'esercizio-30°C~ +50°C

1 Model: P1PM2T2 / P1PM2T1 / P1PM2T2C / P1PM2T2BS / P1PM2T1BS P1P6MT2 / P1PM2T2L / P1PM2T2CH / P1PM2T2DK

Charging Time: 00:00:03 20°C 245V 0.89kW 16A 3.9A 0.002kWh TIME AMPS

Line drawing of an electric vehicle charging plug with cable, terminal, and power outlet (no text or symbols)

Technical data

Line drawing of an electric vehicle charging plug with cable and terminal (no text or symbols)

Specifications

ModeloTipo na fonte de alimentaçãoComprimento total do caboTensãoCorrente nominalTipo de conector
P1PM2T2Monofásico8m200-250V8/10/13/16AT2
P1PM2T1Monofásico8m200-250V8/10/13/16AT1
P1PM2T2CMonofásico8m200-250V8/10/13/16AT2
P3PM2T2Trifásico8m380-450V8/10/13/16AT2
P1PM2T2BSMonofásico8m200-250V8/10/13AT2
P1PM2T1BSMonofásico8m200-250V8/10/13AT1
P3P6MT2Trifásico6m380-450V8/10/13/16AT2
P1P6MT2Monofásico6m200-250V8/10/13/16AT2
P1PM2T2LMonofásico8m200-250V8/10/13/16AT2
P1PM2T2CHMonofásico8m200-250V8/10AT2
P1PM2T2DKMonofásico8m200-250V6AT2

1 Model: P3PM2T2 / P3P6MT2Charging Time: 00:00:03 20°C 405V 0.89kW 16A 3.9A 0.002kWh TIME AMPS

Line drawing of an electric vehicle charging plug with cable and terminal (no text or symbols)

Specifications

ModellTyp av strömförsörjningKabelns totala längdSpänning MärkströmTyp av kontaktdon
P1PM2T2Enfas8m200-250V8/10/13/16AT2
P1PM2T1Enfas8m200-250V8/10/13/16AT1
P1PM2T2CEnfas8m200-250V8/10/13/16AT2
P3PM2T2Trefas8m380-450V8/10/13/16AT2
P1PM2T2BSEnfas8m200-250V8/10/13AT2
P1PM2T1BSEnfas8m200-250V8/10/13AT1
P3P6MT2Trefas6m380-450V8/10/13/16AT2
P1P6MT2Enfas6m200-250V8/10/13/16AT2
P1PM2T2LEnfas8m200-250V8/10/13/16AT2
P1PM2T2CHEnfas8m200-250V8/10AT2
P1PM2T2DKEnfas8m200-250V6AT2

1 Model: P3PM2T2 / P3P6MT2Charging Time: 00:00:03 20°C 405V 0.89kW 16A 3.9A 0.002kWh TIME AMPS

Technical parameters

Mätt (L×B×H)260 × 100 × 72.5 mm
Vikt3-fas: 3.35 kg / 2.9 kg
Skyddsgrad( Control box )IP65
Drifttemperatur-30°C till +50°C

1 Model: P1PM2T2 / P1PM2T1 / P1PM2T2C / P1PM2T2BS / P1PM2T1BS P1P6MT2 / P1PM2T2L / P1PM2T2CH / P1PM2T2DK

Charging Time: 00:00:03 20°C 245V 0.89kW 16A 3.9A 0.002kWh TIME AMPS

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : BLAUPUNKT

Model : P1P6MT2L

Category : Car charger