P-1000 MKII - Uncategorized Gold Note - Free user manual and instructions
Find the device manual for free P-1000 MKII Gold Note in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Phono Preamplifier |
| Brand | Gold Note |
| Model | P-1000 MKII |
| Input Impedance | 10 kΩ (MM), 100 Ω (MC) |
| Output Impedance | 50 Ω |
| Gain | 40 dB (MM), 60 dB (MC) |
| Frequency Response | 20 Hz - 20 kHz (+/- 0.5 dB) |
| Total Harmonic Distortion (THD) | < 0.005% |
| Signal-to-Noise Ratio | > 90 dB (MM), > 80 dB (MC) |
| Power Consumption | 15 W |
| Dimensions (W x D x H) | 430 x 310 x 80 mm |
| Weight | 8.5 kg |
| Chassis Material | Aluminum (brushed finish) |
| Number of Inputs | 2 x RCA (MM/MC selectable) |
| Number of Outputs | 1 x RCA, 1 x XLR |
| Warranty | 2 years (extendable) |
Frequently Asked Questions - P-1000 MKII Gold Note
How do I switch between MM and MC cartridge modes?
Use the rear panel switch labeled 'Input Mode'. Set it to 'MM' for moving magnet cartridges and 'MC' for moving coil cartridges. Ensure power is off before changing.
What is the recommended loading capacitance for MM cartridges?
The P-1000 MKII has a fixed input capacitance of 100 pF for MM. For optimal response, use cables with low capacitance (under 50 pF/m).
Can I use the P-1000 MKII with a turntable that has a built-in preamp?
Yes, but you should bypass the turntable's built-in preamp if possible. Connect the turntable's line-level output to a line input on the P-1000 MKII using the 'Line' input (not the phono input).
How do I ground my turntable to the P-1000 MKII?
Connect the turntable's ground wire to the 'GND' terminal on the back of the P-1000 MKII. This helps reduce hum and noise.
What should I do if there is no sound output?
First, check that the power cable is connected and the unit is on. Verify all connections (RCA/XLR) are secure. Ensure the correct input is selected (MM/MC or Line). Try a different set of cables or source.
How often should I clean the P-1000 MKII?
Wipe the chassis with a dry, soft cloth as needed. For stubborn dust, use a slightly damp cloth with mild soap. Avoid abrasive cleaners. Internal cleaning should be done by a qualified technician.
Does the P-1000 MKII have a subsonic filter?
Yes, it includes a built-in subsonic filter (rumble filter) that can be engaged via a rear panel switch. This filters out low-frequency disturbances below 20 Hz.
What is the power consumption in standby mode?
In standby mode, the P-1000 MKII consumes less than 1 W. To fully power off, use the rear power switch or unplug the unit.
Can I stack other components on top of the P-1000 MKII?
It is not recommended to stack components directly on top, as the chassis needs ventilation. If stacking is necessary, use isolation feet or a component rack with sufficient spacing.
What is the warranty period and how do I extend it?
The standard warranty is 2 years. You can extend it to 3 years by registering your product on the Gold Note website within 30 days of purchase.
User questions about P-1000 MKII Gold Note
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual P-1000 MKII - Gold Note and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. P-1000 MKII by Gold Note.
USER MANUAL P-1000 MKII Gold Note
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Gold Note
Model : P-1000 MKII
Category : Uncategorized