Essence 8 KE1282 - Remote control ONE FOR ALL - Free user manual and instructions
Find the device manual for free Essence 8 KE1282 ONE FOR ALL in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Universal remote control |
| Brand | One For All |
| Model | Essence 8 KE1282 |
| Number of keys | Approximately 40 |
| Infrared range | Up to 10 meters |
| Power source | 2 AAA batteries (not included) |
| Dimensions | Approximately 20 x 5 x 2 cm |
| Weight | Approximately 120 g (with batteries) |
| Material | ABS Plastic |
| Compatibility | TV, set-top box, Audio, DVD/Blu-ray, streaming |
| Main functions | Device control, automatic programming, volume and channel keys, direct access to streaming services |
| Display | No, no visual information |
| Backlight | No |
| Setup | Simple, via code or automatic search |
| Care and cleaning | Soft dry cloth, avoid solvents |
| Safety | Household use, keep out of reach of children |
| Spare parts | AAA batteries are freely available |
| Repairability | Not user-serviceable (except batteries) |
| Warranty | 2 years (depending on retailer) |
Frequently Asked Questions - Essence 8 KE1282 ONE FOR ALL
How to program the One For All Essence 8 KE1282 remote control?
First insert the batteries. Then turn on the device you want to control. Press and hold the SETUP key until the LED blinks. Enter the 4-digit code corresponding to your brand (see supplied code list). If the code is correct, the LED turns off. Test the functions.
What to do if the code does not work?
Use automatic search: press and hold the SETUP key, then press CH+ repeatedly until the device turns off. Press OK to memorize the code.
How to change the batteries?
Slide open the battery compartment cover on the back. Remove the old batteries and insert two new AAA batteries observing polarity (+/-). Close the cover.
The remote control is not working, what should I check?
Check that the batteries are correctly installed and not depleted. Make sure no obstacles block the infrared signal between the remote and the device. Try moving closer to the device.
Can I control multiple devices with this remote control?
Yes, the remote can control up to 4 devices (TV, set-top box, etc.). Use the device selection keys (e.g., TV, SAT) to switch between them.
How to reset the remote control?
Remove the batteries, press any key for 10 seconds to drain residual energy, then reinsert the batteries. This will erase all programmed codes.
Does the remote control have a learning function?
No, the Essence 8 model uses a built-in code database. It cannot learn signals from other remotes.
What types of devices are compatible?
The remote is compatible with most TVs, set-top boxes, DVD/Blu-ray players, soundbars, and some streaming devices. Check the included brand list.
How to clean the remote control?
Use a slightly damp (not wet) soft cloth to clean the surface. Do not use chemical or abrasive cleaners. Avoid letting moisture enter.
Is the range of the remote control long?
Yes, the infrared range can reach up to 10 meters in direct line of sight. Obstacles may reduce the range.
User questions about Essence 8 KE1282 ONE FOR ALL
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Remote control in PDF format for free! Find your manual Essence 8 KE1282 - ONE FOR ALL and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Essence 8 KE1282 by ONE FOR ALL.
USER MANUAL Essence 8 KE1282 ONE FOR ALL
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : ONE FOR ALL
Model : Essence 8 KE1282
Category : Remote control