SBS 36 - Irrigation timer T.I.P. - Free user manual and instructions
Find the device manual for free SBS 36 T.I.P. in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Irrigation timer |
| Brand | T.I.P. |
| Model | SBS 36 |
| Power supply | 9V battery (1 battery) |
| Number of outlets | 1 outlet (1/2" female) |
| Programming | Days of the week, watering duration, start time |
| Watering cycles | Up to 3 cycles per day |
| Watering duration | From 1 to 120 minutes |
| Manual shut-off function | Yes, temporary ON/OFF button |
| Rain function | No (no sensor) |
| Display | LCD screen |
| Housing material | UV-resistant ABS plastic |
| Protection rating | IP54 (splash-proof) |
| Dimensions (L x W x H) | 130 x 80 x 55 mm |
| Weight | 180 g (without batteries) |
| Operating temperature | 5 °C to 50 °C |
| Cleaning | Wipe with a damp cloth, no solvents |
| Maintenance | Regularly check batteries and seals |
| Spare parts | Batteries, O-rings available from customer service |
| Repairability | Not user-repairable (sealed electronics) |
| Warranty | 2 years |
Frequently Asked Questions - SBS 36 T.I.P.
How to install batteries in the SBS 36 timer?
Open the battery compartment located at the bottom of the device using a screwdriver. Insert a 9V battery observing polarity (+/-). Close the cover and screw it properly to ensure sealing.
How to program a watering cycle?
Press the PROG button to enter programming mode. Use the '+' and '-' buttons to set the start time, duration, and days. Confirm each step with OK. Repeat for up to 3 cycles.
What to do if the screen shows nothing?
Check that the battery is correctly installed and not discharged. Replace it if necessary. If the screen remains blank, contact customer service.
The timer does not open in automatic mode, what to do?
Make sure the MANU/AUTO mode is set to AUTO. Check that the programming is properly saved. If the problem persists, reset the device by removing the battery for 30 seconds.
Can I use this timer with a drip hose?
Yes, the SBS 36 is compatible with drip systems and standard sprinklers. Ensure the flow rate does not exceed the valve capacity (approx. 20 l/min).
How to clean the timer?
Use a soft slightly damp cloth to wipe the exterior. Never use harsh cleaners or sharp objects. Make sure the battery compartment cover is completely dry before closing.
What does the flashing symbol on the screen mean?
An error symbol (triangle with exclamation point) indicates a battery or sensor problem. Replace the battery and check connections. If the symbol persists, contact customer service.
The timer leaks at the connection, how to fix?
Check that the O-ring is in place and in good condition. Tighten the connection by hand without forcing. If the leak persists, replace the sealing ring (ref. TIP-12345).
Can I program watering based on soil moisture?
No, the SBS 36 does not have an input for a moisture sensor. It works only on a timer schedule. For moisture-based regulation, a more advanced model would be required.
How to reset the timer?
Remove the 9V battery for about 30 seconds, then reinsert it. All settings will be erased and the clock will need to be set again.
User questions about SBS 36 T.I.P.
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Irrigation timer in PDF format for free! Find your manual SBS 36 - T.I.P. and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SBS 36 by T.I.P..
USER MANUAL SBS 36 T.I.P.
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : T.I.P.
Model : SBS 36
Category : Irrigation timer