WPS 3000 R - Pump T.I.P. - Free user manual and instructions
Find the device manual for free WPS 3000 R T.I.P. in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Submersible clean water pump |
| Brand | T.I.P. |
| Model | WPS 3000 R |
| Application area | Pumping clean water, watering, draining basements or tanks |
| Power supply | 230 V ~ 50 Hz |
| Nominal power | 800 W |
| Maximum flow rate | 3000 L/h |
| Maximum delivery head | 8 m |
| Maximum suction head | 0 m (self-priming underwater) |
| Maximum immersion depth | 5 m |
| Discharge connection | 1" (25.4 mm) with adapter |
| Dimensions (L x W x H) | 25 cm x 20 cm x 30 cm |
| Weight | 5.5 kg |
| Body material | Stainless steel and reinforced plastic |
| Dry running | Not allowed (risk of damage) |
| Thermal protection | Yes, with automatic shutdown in case of overheating |
| Protection rating | IPX8 (permanent immersion) |
| Cable length | 10 m |
| Sound level | ~70 dB(A) |
| Maximum water temperature | 35 °C |
| Maintenance | Regular cleaning of the strainer, rinse after use |
| Spare parts available | O-ring, check valve, strainer, capacitor |
| Warranty | 2 years |
Frequently Asked Questions - WPS 3000 R T.I.P.
What is the difference between the WPS 3000 R and the WPS 3000?
The R model includes an integrated check valve and an improved float switch for automatic operation.
Can this pump be used for seawater?
No, this pump is designed only for clean water. Corrosive seawater would damage the internal parts.
How do I prime the WPS 3000 R pump?
The pump is submersible, so just place it in water and it will prime automatically. Ensure the water level is sufficient.
What to do if the pump does not start?
Check the power supply, the water level (must be above the strainer), and ensure the float switch is not blocked. Refer to the manual for details.
What is the maximum particle size the pump can handle?
The pump accepts particles up to 1 mm in diameter. For dirtier water, use an additional filter.
Can I adjust the height of the float switch?
Yes, the float can be adjusted by sliding its cable in the provided support to set the on and off levels.
What is the average lifespan of this pump?
With regular maintenance and avoiding dry running, the pump can last 5 to 8 years depending on usage.
How to winterize the pump?
Completely drain the water from the pump and store it in a frost-free place. Frost can crack the pump body.
Where can I buy spare parts?
Spare parts are available from T.I.P. authorized dealers or from specialized pump parts websites.
Can the pump run continuously?
Yes, the pump is designed for continuous operation. However, ensure the water temperature does not exceed 35 °C to avoid overheating.
User questions about WPS 3000 R T.I.P.
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Pump in PDF format for free! Find your manual WPS 3000 R - T.I.P. and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. WPS 3000 R by T.I.P..
