MX5102 - Battery charger Panamax - Free user manual and instructions
Find the device manual for free MX5102 Panamax in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Battery charger |
| Brand | Panamax |
| Model | MX5102 |
| Power supply | Mains 100-240 V AC, 50/60 Hz |
| Output voltage | 1.2 V to 1.5 V per slot |
| Charging current | 500 mA (per slot) |
| Number of slots | 4 |
| Compatible battery types | Ni-MH, Ni-Cd rechargeable (AA, AAA) |
| Charging indicators | LED per slot (red: charging, green: charged) |
| Built-in protections | Overcurrent, short-circuit, reverse polarity |
| Dimensions (W x D x H) | 110 x 70 x 30 mm |
| Weight | 120 g |
| Housing material | Flame-retardant plastic |
| Additional functions | Defective battery detection, fast/slow charge |
| Maintenance | Clean with a dry cloth; do not use solvents |
| Safety | Keep out of reach of children; do not expose to moisture |
| Spare parts available | Power cable (detachable) |
| Repairability | Not user-serviceable; contact customer service |
Frequently Asked Questions - MX5102 Panamax
What types of batteries can I charge with the Panamax MX5102?
The charger is designed for rechargeable Ni-MH and Ni-Cd batteries in AA and AAA sizes. Do not charge alkaline or non-rechargeable lithium batteries.
How many batteries can I charge at the same time?
The MX5102 has 4 independent slots. You can charge 1 to 4 batteries simultaneously, each slot works independently.
What is the charging time for AA batteries?
The time depends on the battery capacity. As an indication, for AA batteries of 2000 mAh, expect about 4 hours with a current of 500 mA. AAA batteries charge faster.
How do I know when charging is complete?
Each slot has an LED: red while charging, green when the battery is fully charged. Once green, you can remove the battery.
Does the charger stop automatically?
Yes, the charger has end-of-charge detection that automatically cuts off the current when the battery is full, preventing overcharging.
What should I do if a battery does not charge?
First check that the battery is properly placed and the contacts are clean. If the problem persists, the battery may be defective or at the end of its life. The charger detects defective batteries and the LED blinks.
Can I leave batteries in the charger after charging?
It is not recommended to leave batteries in the charger for more than 24 hours after full charge. Although the charger switches to trickle charge, it is better to remove them to extend battery life.
Is the charger compatible with batteries of different brands?
Yes, it accepts all standard rechargeable Ni-MH and Ni-Cd batteries in AA/AAA sizes, regardless of brand, as long as they are in good condition.
What to do in case of overheating?
The charger is protected against overheating. If it becomes abnormally hot, unplug it immediately and let it cool down. Check that the ventilation slots are not blocked.
How to clean the charger?
Unplug the charger before cleaning. Use a soft, dry cloth to wipe the housing. Never use liquid, solvent, or abrasive cleaner.
User questions about MX5102 Panamax
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Battery charger in PDF format for free! Find your manual MX5102 - Panamax and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. MX5102 by Panamax.
USER MANUAL MX5102 Panamax
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Panamax
Model : MX5102
Category : Battery charger