Power360 P360-8 - Surge protector Panamax - Free user manual and instructions

Product Type	Surge Protector Power Strip
Model	Power360 P360-8
Number of Outlets	8 (8 grounded AC outlets)
Input Voltage	120 V AC, 60 Hz
Maximum Current	15 A
Maximum Power	1800 W (120V * 15A)
Joule Rating	1080 J
Clamping Voltage	330 V
Response Time	< 1 ns
Protection Modes	L-N, L-G, N-G
EMI/RFI Filtering	Up to 20 dB reduction
Indicator Lights	Protected (green) and Grounded (red) LEDs
Switch	Illuminated on/off switch
Dimensions (L x W x H)	13 x 3.5 x 1.8 inches (33 x 9 x 4.5 cm)
Weight	2.2 lb (1.0 kg)
Power Cord Length	6 ft (1.8 m)
Mounting	Wall-mountable keyhole slots
Warranty	Limited lifetime warranty
Maximum Spike Current	36,000 A
Safety Certifications	UL Listed, cUL, FCC
Operating Temperature	32°F to 104°F (0°C to 40°C)
Housing Material	High-impact fire-resistant plastic

Frequently Asked Questions - Power360 P360-8 Panamax

What types of devices can I plug into the Panamax Power360 P360-8 surge protector?

The Power360 P360-8 is designed for audio/video equipment, home theater components, computers, and other sensitive electronics. It provides surge protection for devices drawing up to 15 amps total.

What does the green and red LED indicator mean?

The green LED indicates that surge protection is active and working. The red LED indicates that the ground connection is proper. If the red LED is off, check your outlet's grounding.

How many joules of protection does the P360-8 provide?

The unit provides 1080 joules of surge energy absorption, which is sufficient for protecting most home electronics from moderate power surges.

Can I mount this surge protector on the wall?

Yes, the P360-8 has keyhole slots on the back for wall mounting. Use appropriate screws (not included) to secure it to a wall or other surface.

What is the clamping voltage of the Power360 P360-8?

The clamping voltage is 330 volts, meaning it will start diverting excess voltage once it rises above 330V to protect your connected devices.

Does the surge protector have a warranty?

Yes, Panamax offers a limited lifetime warranty on the surge protector and a connected equipment warranty up to $500,000 (subject to terms).

How do I clean and maintain the surge protector?

Unplug the unit and wipe the exterior with a dry cloth. Do not use liquids or abrasive cleaners. Periodically check the LEDs to ensure protection is active.

What should I do if the green protected LED is off?

If the green LED is off, the surge protection circuit may be damaged. Unplug the surge protector and replace it immediately. Do not continue using it as it no longer provides protection.

Can I daisy chain multiple surge protectors?

No, daisy chaining surge protectors is not recommended and can cause overloading and fire hazards. Plug the P360-8 directly into a wall outlet.

Is the Panamax Power360 P360-8 compatible with international voltages?

No, it is designed for 120V/60Hz North American outlets only. Using it with other voltages may damage the unit and void the warranty.

USER MANUAL Power360 P360-8 Panamax

This Package Includes:

(1) POWER360 Eight Outlet Surge Protector
(2) Modular USB charging stations
(2) 6' micro-USB to USB cables
(to connect charging station to base unit)
(2) Rubber feet for charging modules
(1) User manual

8 surge protected AC outlets.

2 Modular Dual-Port USB chargers

Each Charging Station can charge up to two devices simultaneously (2.1A capacity).

Protect or Disconnect

Keeps electronics safe from power spikes by disconnecting load in a catastrophic event.

SmartGuard

Protects against brownouts and dangerous over-voltage conditions. Disconnects the power when the incoming voltage falls below 95 Volts or rises above 140 Volts. Reconnects when the voltage returns to a safe level.

Circle of Protection

LED indicator monitors the outlet wiring, voltage and protection status.

Coax and Telco Protection

Protects from surges on coax and telephone signal lines, while maintaining full bandwidth for high definition video and high speed internet cable/DSL connections.

Lifetime Warranty

Limited lifetime product warranty plus \$500,000 connected equipment protection policy.

Properly Connecting Your PANAMAX POWER360

To completely protect your equipment from surges, every wire leading into or out of the equipment you want to protect must be connected to the appropriate Panamax surge protector. Damaging lightning and power surges can enter your system through any AC power or signal-line (phone line, grounding wires, coax cables, modem cables, LAN cables, etc.) connected to your electronic equipment.

The Panamax Connected Equipment Protection Policy is void if any wire leading into or out of the equipment is not properly connected to the appropriate Panamax surge protector. The surge protector must also be plugged into a properly wired and grounded outlet. Please see the warranty for details or contact the Panamax Tech Support Department with questions.

Important Safety Points

Panamax POWER360 and the connected equipment must be indoors, in a dry location and in the same building. Although your Panamax POWER360 is very durable, its internal components are not isolated from the environment. Do not install any Panamax product near heat emitting appliances such as a radiator or heat register. Do not install this product where excessive moisture is present; for example near a bathtub, sink, pool, basement floor, fish tank, etc. It is not uncommon for a building to be improperly grounded. In order to protect your equipment, Panamax products must be plugged into a properly wired and grounded 3-wire outlet. Additionally, building wiring and grounding must conform to applicable NEC (USA) or CEC (Canada) codes for the Panamax protection policy to be valid.

Circle of Protection

The CIRCLE OF PROTECTION provides peace of mind that your connected equipment is safe. When all lights are blue, you can rest assured that your electronics are protected.

1. PROTECTED

BLUE indicates that the POWER360 is functioning properly and that all connected equipment is protected. OFF indicates that the power is disconnected from the outlets. If this light is OFF and the VOLTAGE light is illuminated BLUE, then the PROTECT OR DISCONNECT feature in your POWER360 has protected your equipment from a catastrophic surge event and disconnected power. Unplug all electronics from your POWER360 and contact Panamax Tech Support for assistance.

2. WIRING

BLUE indicates that the wall outlet is properly wired and grounded. RED indicates an open ground (no ground wire) or reverse wiring (polarity) condition is detected. Unplug all electronics from your POWER360 and contact Panamax Tech Support for assistance.

3. VOLTAGE

BLUE indicates that incoming voltage is within a safe range. RED indicates an over-voltage or brownout condition and that POWER360 has disconnected power to connected equipment to keep it safe. POWER360 will automatically reset when voltage is back within a safe range. If condition persists, it is advisable to contact an electrician or your power company to determine the cause of the abnormal voltage issue.

Installation

NOTE to TV ANTENNA, SATELLITE DISH and CATV INSTALLERS:

Articles 810.21 and 820.40 of the NEC provide specific guidelines for proper grounding, and in particular, specify that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as practical.

Installing (AC Power):

1. Turn OFF the power to all equipment that will be plugged into the unit.
2. Make sure that the ON/OFF switch is in the OFF position. Plug the unit into the wall outlet and then turn it ON.
3. Verify that the "Wiring" LED is BLUE, indicating that the wall outlet is properly wired.
4. Plug the equipment to be protected into the POWER360 unit and, one at a time, turn each piece of connected equipment ON and check for correct operation.
5. Turn OFF the unit and all connected equipment before connecting

any signal lines.

Installing (Telephone Lines):

(Note: Telephone patch cables not included)

IMPORTANT: Note the position of the IN and OUT jacks on the POWER360 unit. IN is for the line connection that comes from the wall or floor jack. OUT is for the line connection to your connected equipment. The protection circuit will only function if connected properly. Reversed connections will pass the signal to the connected equipment but will also prevent the protection circuitry from working and will invalidate the Panamax Connected Equipment Protection Policy.

1. Make sure the POWER360 and all connected equipment is turned OFF.
2. Take the incoming telephone line and plug it into the appropriate IN jack on the protector. The line should now be connected between the wall and the POWER360 unit.
3. Plug a telephone line (not included) into the OUT jack and then plug the other end into the equipment to be protected.
4. Turn On the protector and the connected equipment. Verify that each piece of connected equipment is receiving power and signal.

Installing (Coaxial Lines):

(Coaxial patch cables not included)

Note the position of the IN and OUT jacks on the POWER360 unit. IN is for the line connection that comes from the wall or floor jack. OUT is for the line connection to your connected equipment.

The POWER360 coaxial protection circuits achieve optimum signal quality from Panamax's coaxial protectors that have the smallest signal loss on the market – less than 0.5dB of attenuation from 0MHz to 2.2GHz. Our coaxial protection has been specifically designed to virtually eliminate signal loss to ensure HD video and high speed internet performance is not compromised. The clamping level of 75 volts will meet the demands of both cable and satellite voltage while minimizing exposure to spikes and surges.

NOTE: The CATV/Sat/Antenna protection circuit in these models is bi-directional and has been designed to work with cable TV systems that send pay-per-view ordering information to the cable company over the coaxial line.

Make sure that your equipment is connected to the proper jacks. When used with diplexers, this protection circuit must be placed between the diplexer and the Satellite receiver; it will not protect the diplexer.

1. Make sure the Panamax protector and all connected equipment is turned OFF.
2. Connect the coaxial cable from the CATV system, antenna, or Satellite dish to the appropriate LINE connector on the POWER360.
3. Connect a coaxial cable from the EQUIP jack on the protector to appropriate input jack on your TV, cable modem or Satellite receiver.

USB Charging Station:

Your POWER360 includes two modular dual-port charging stations. The unique, patent-pending design of these charging stations allows them to be removed from the base unit and placed on a nearby desk or table top for easy access.

The charging station must be tethered to, or plugged directly into, your base unit to charge. A 6' tether cable is included for each charging station. If you require a longer cable, various lengths of standard USB-to-Micro USB cables are commonly available. Rubber feet are included for your charging stations. Applied on the bottom and towards the front of your charging station, they will help keep your charging stations in place. Each charging station can handle up to 2.1A capacity, typically enough for 2 mobile devices or 1 tablet. The USB charging ports are surge-protected.

Wall Mounting:

Your POWER360 may be affixed to a wall or other flat surface.

1. Determine the mounting location. Hold the POWER360 unit up against the location and mark drilling positions using the mounting guides on the sides of the unit. Note: You are marking the center point where you would like the unit to be mounted.

2. Drive a #6 screw into each drilling position. Leave approximately 1/8" of space between the back of the screw head and the wall.

3. Position the POWER360 over the two screws and slide down to lock into place.

4. Using the above procedure allows easy removal of the unit by sliding up to disengage the unit from the screws.

Troubleshooting

The CIRCLE OF PROTECTION is not lit, there is no AC power to my equipment, or my equipment doesn't turn on.

• Make sure POWER360 is plugged into a working AC outlet.
• Verify the "VOLTAGE" indicator on the CIRCLE OF PROTECTION is Blue. If Red, the incoming line voltage is either too high or too low and has been disconnected from your connected equipment.
• Make sure the switch/circuit breaker is in the ON position.
• If you still have no power, POWER360 may be damaged. Contact Panamax Tech Support.

My mobile device is not charging.

• Some devices may be incompatible with this USB charging port. Although the device may report that it is not charging, it is most likely to be charging at a lower (0.5 Amp) current.
• When charging two devices it is possible that that USB charging circuitry may be overloaded. Disconnect one of the devices.
• Make sure the tether cable is connected between the charging station and base unit, or the charging station is completely plugged into the base unit.

There is no audio or video from my cable box and/or my cable modem is not connecting.

• Check the coaxial connections, making sure they are correctly and securely installed.
• Try a different coaxial cable.
• Bypass the coaxial connectors. If your picture returns, the protector is damaged. Contact Panamax (website or Tech Support Department) for replacement.
• If you still have no picture, a problem with your cable provider's signal may exist.

(Note: Coaxial patch cables not included)

My telephone, DSL modem or fax machine has AC power but still does not work.

• Check to see if your connected equipment is receiving a dial tone.
• Try a different telephone cable, or try the equipment with a different telephone jack.
• Bypass the telephone connectors. If your dial tone returns, the protector is damaged. Contact Panamax (website or Tech Support Department) for replacement.
• If you still have no dial tone, a problem with the phone company's lines may exist.

The Panamax circuit breaker disconnects AC power from the connected equipment.

- You have exceeded the ampere rating for your surge protector. As a temporary fix, disconnect one or more pieces of equipment. Ask your Panamax dealer about additional Panamax protectors that may be required.

PANAMAX TECH SUPPORT: 1-800-472-5555

www.panamax.com/POWER360

Warranty and Connected Equipment Policy Information

CAUTION!

All Panamax Warranties and Connected Equipment Policies are valid only in the United States and Canada.

CAUTION!

Audio/Video, computer and/or telephone system installations can be very complex systems, consisting of many interconnected components.

Due to the nature of electricity and surges, a single protector may not be able to completely protect complex installations. In those cases, a systematic approach using multiple protectors must be employed. Systematic protection requires professional design. AC power, satellite cables, CATV cables, telephone/network lines, signal lines or any other electrical conductors, entering the system that do not pass through this surge protector may invalidate the Panamax Connected Equipment Protection Policy. For additional information on how to protect your system, please contact Panamax before connecting your equipment to the surge protector.

CAUTION! WARRANTY LIMITATION FOR INTERNET PURCHASERS

Panamax products purchased through the Internet do not carry a valid Product Warranty or Connected Equipment Protection Policy unless purchased from an Authorized Panamax Internet Dealer and the original factory serial numbers are intact (they must not have been removed, defaced or replaced in any way). Purchasing from an Authorized Panamax Internet Dealer insures that the product was intended for consumer use, has passed all quality inspections and is safe. Buying through auction sites or unauthorized dealers may result in the purchase of salvaged, failed and/or products not intended for use in the US. In addition, Authorized Panamax Internet dealers have demonstrated sufficient expertise to insure warranty compliant installations. For a list of Authorized Panamax Internet Dealers go to www.panamax.com. If you have any questions regarding these requirements, please contact Panamax Tech Support.

Product Upgrade Program

If your Panamax power conditioner sacrifices itself while protecting your connected equipment, you have an option to upgrade to the latest technology. Please go to our web site www.panamax.com or contact Panamax Tech Support at 800-472-5555 for details.

Panamax Surge Protector Lifetime Limited Product Warranty

Panamax warrants to the purchaser of any standard Panamax surge protector that the surge protector shall be free of defects in design, material, or workmanship, and Panamax will repair or replace any defective unit. For product replacement see "NOTIFICATION" (3).

Panamax Surge Protector Limited

Connected Equipment Protection Policy

It is the policy of Panamax that it will, at its election, either replace, pay to replace at fair market value, or pay to repair, up to the dollar amount specified below, equipment that is damaged by an AC power, cable, telephone, or lightning surge while connected to a properly installed Panamax power conditioner. To be eligible for compensation, repair and or replacement, the power conditioner must shows signs of surge damage or that it is operating outside of design specifications, relative to its surge protection capability, and under all of the circumstances failed to protect your connected equipment.

\$500,000 CONNECTED EQUIPMENT POLICY

THE CONNECTED EQUIPMENT POLICY IS SUBJECT TO THE FOLLOWING CONDITIONS AND LIMITATIONS

1. ORIGINAL OWNERSHIP REQUIREMENT:

Panamax's connected equipment policy extends to the original purchaser of the Panamax product only and is non-transferable. Original purchase receipts must accompany any product return or claim for connected equipment damage.

2. PROPER INSTALLATION:

Panamax AC protectors must be directly plugged into a properly grounded 3-wire AC outlet. Extension cords*, non-grounded two prong adapters, or other non-Panamax surge products must not be used. Building wiring and other connections to protected equipment must conform to applicable codes (NEC or CEC). No other ground wires or ground connections may be used. All wires (including, e.g., AC power lines, telephone lines, signal/data lines, coaxial cable, antenna lead-ins) leading into the protected equipment must first pass through a single Panamax protector designed for the particular application. The protector and the equipment to be protected must be indoors in a dry location, and in the same building. Panamax installation instructions and diagrams must be followed

3. NOTIFICATION:

You must notify Panamax within ten days of any event precipitating request for product replacement or payment for connected equipment damage. A return authorization (RA) number must first be obtained from the Panamax Tech Support Department at www.panamax.com** before returning the protector Panamax. At this time, you must notify Panamax if you believe you have a claim for damaged connected equipment. Once you obtain an RA number, please mark the number on the bottom of the unit and pack it in a shipping carton/box with enough packing material to protect it during transit. The RA number must also be clearly marked on the outside of the carton. Ship the unit Panamax. Please note that you are responsible for any and all charges related to shipping the unit to Panamax. If connected equipment damage was indicated on your RA request, Panamax will mail you claim kit to be completed and returned within 30 days. A connection diagram of your system will be required as part of the claim kit. Be sure to note its configuration before disconnecting your equipment.

4. DETERMINATION OF FAILURE:

Panamax will evaluate the protector for surge damage. The Panamax protector must show signs of surge damage or must be performing outside (>10%) of design specifications relative to its surge protection capability. Opening the enclosure, tampering with, or modifying the unit in any way shall be grounds for an automatic denial your request for payment. Panamax, after evaluating all information provided, will determine whether or not your request is eligible for payment. If the surge protector shows no signs of AC power or signal line surge damage and is working within design specifications, Panamax will return the unit to you with a letter explaining the test results and notifying you of the rejection your claim. Exceptions: If a dealer or installer replaces the protector for the customer, replacement will be returned to the dealer installer; or if the protector is a pre-1996 model, it will be replaced; or, for a Canadian customer, the protector will be replaced. Panamax reserves the right to inspect the damaged connected equipment, parts, or circuit boards. Please note that you are responsible for any and all charges related to shipping the damaged equipment to Panamax. Panamax also reserves the right to inspect the customer's facility. Damaged equipment deemed uneconomical to repair must remain available for inspection by Panamax until the claim is finalized.

5. REQUEST PAYMENTS:

Once Panamax has determined that you are entitled to compensation, Panamax will, at its election, either pay you the present fair market value of the damaged equipment, or pay for the cost of the repair, or send you replacement equipment, or pay the equivalence of replacement equipment.

6. OTHER INSURANCE/WARRANTIES:

This coverage is secondary to any existing manufacturer's warranty, implied or expressed, or any insurance and/or service contract that may cover the loss.

7. EXCLUSIONS:

THE PANAMAX CONNECTED EQUIPMENT PROTECTION POLICY DOES NOT APPLY TO

Service charges, installation costs, reinstallation costs; setup cost; diagnostic charges; periodic checkups; routine maintenance; loss of use of the product; costs or expenses arising out of reprogramming or loss of programming and/or data; shipping charges or fees; service calls; loss or damage occasioned by fire, theft, flood, wind, accident, abuse or misuse, and products subject to manufacturer's recall or similar event.

8. DISPUTE RESOLUTION:

Any controversy or claim arising out of or relating to Panamax's Connected Equipment Protection Policy, or the alleged breach thereof, shall be settled by arbitration administered by the American Arbitration Association under its Commercial Arbitration Rules. You may file for arbitration at any AAA location in the United States upon the payment of the applicable filing fee. The arbitration will be conducted before a single arbitrator, and will be limited solely to the dispute or controversy between you and Panamax.

The arbitration shall be held in any mutually agreed upon location in person, by telephone, or online. Any decision rendered in such arbitration proceedings will be final and binding on each of the parties, and judgment may be entered thereon in a court of competent jurisdiction. The arbitrator shall not award either party special, exemplary, consequential, punitive, incidental or indirect damages, or attorney's fees. The parties will share the costs of arbitration (including the arbitrator's fees, if any) in the proportion that the final award bears to the amount of the initial claim.

9. GENERAL:

If you have any questions regarding the product warranty or the connected equipment protection policy, please contact the Panamax Tech Support Department at www.panamax.com. The Limited Product Warranty and Connected Equipment Policy herein supersede all previous warranties and/or Connected Equipment repair/replacement policies.

THE LIMITED PRODUCT WARRANTY IS THE ONLY WARRANTY PROVIDED WITH THIS PANAMAX PRODUCT AND ANY OTHER IMPLIED OR EXPRESSED WARRANTIES ARE NON-EXISTENT.

This warranty may not be modified except in writing, signed by an officer of the Panamax Corporation.

* The use of a Panamax extension cord or equivalent (UL or CSA listed, minimum 14AWG, 3-wire grounded) will not invalidate the warranty.

** Forms are available on the Panamax web site for requesting RAs and opening a claim for connected equipment damage.

POWER ^360 TM

Circle of Protection