PowerSwitch Z9432F-ON - Switch DELL - Free user manual and instructions
Find the device manual for free PowerSwitch Z9432F-ON DELL in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Network Switch |
| Brand | Dell |
| Model | PowerSwitch Z9432F-ON |
| Form Factor | 1U Rackmount |
| Ports | 32 x 100GbE QSFP28 |
| Switching Capacity | 6.4 Tbps |
| Dimensions (H x W x D) | 1.72 x 17.2 x 18.5 in (43.7 x 437 x 470 mm) |
| Weight | 24.25 lb (11 kg) |
| Power Supply Type | Dual hot-swappable AC power supply |
| Maximum Power Consumption | 350 W |
| Cooling | 4 hot-swappable fan modules, front-to-back airflow |
| Operating Temperature | 32°F to 113°F (0°C to 45°C) |
| Management | CLI, SNMP, REST API, Web GUI |
| Supported Network OS | Open Networking (ONIE), OS10, Cumulus, etc. |
| Safety Certifications | UL, CE, FCC, RoHS |
| Installation | Rack mount kit included |
| Cleaning Instructions | Use dry air to clean vents and connectors; avoid liquids |
| Spare Parts Available | Power supplies, fan modules, cables |
| Repairability | Field-replaceable units: PSUs, fans; no user-serviceable parts inside |
| General Information | High-performance data center switch; supports multiple port configurations |
Frequently Asked Questions - PowerSwitch Z9432F-ON DELL
How do I reset the Dell PowerSwitch Z9432F-ON to factory defaults?
To factory reset, press and hold the reset button on the front panel for 10 seconds while power is on. Alternatively, use the CLI command restore factory.
What are the supported SFP+ modules for the Z9432F-ON?
This switch supports 100GbE QSFP28 modules. Dell recommends using Dell qualified optics, such as Dell 100G-QSFP28-SR4. For compatibility, refer to the Dell Compatibility Matrix.
What is the default IP address for management?
Default management IP is 192.168.1.1/24 or DHCP assigned. You can access the console via serial port at 115200 baud.
How do I configure VLANs on this switch?
VLANs are configured via CLI: interface vlan 10 then assign ports with switchport access vlan 10. For trunking, use switchport mode trunk.
What is the power consumption of the Z9432F-ON?
Maximum power consumption is 350 W. Typical consumption is around 200 W depending on port usage and configuration.
Can I use third-party transceivers?
Dell strongly recommends using Dell-qualified optics for optimal performance. Third-party modules may work but are not officially supported and may cause issues.
How do I update the firmware?
Firmware can be updated via CLI using update boot or through the web interface. Download the latest image from Dell Support and transfer via TFTP/SCP.
What warranty does the Dell PowerSwitch Z9432F-ON come with?
It typically includes a limited lifetime warranty. Extended support options are available.
How do I access the console port?
Use an RJ45 serial cable connected to the console port. Settings: 115200 baud, 8 data bits, no parity, 1 stop bit. Use terminal software like Putty.
Is this switch stackable?
No, the Z9432F-ON is a standalone switch. For stacking, consider the Dell PowerSwitch S-series with dedicated stacking ports.
User questions about PowerSwitch Z9432F-ON DELL
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Switch in PDF format for free! Find your manual PowerSwitch Z9432F-ON - DELL and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. PowerSwitch Z9432F-ON by DELL.
USER MANUAL PowerSwitch Z9432F-ON DELL
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : DELL
Model : PowerSwitch Z9432F-ON
Category : Switch