BEHPGH 121 - Air Conditioning BEKO - Free user manual and instructions
Find the device manual for free BEHPGH 121 BEKO in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Portable Air Conditioner |
| Model Number | BEHPGH 121 |
| Brand | BEKO |
| Cooling Capacity | 12000 BTU/h |
| Power Supply | 220-240 V ~ 50 Hz |
| Power Consumption (Cooling) | 1100 W |
| Dimensions (W x D x H) | 350 x 450 x 700 mm |
| Weight | 25 kg |
| Airflow Rate | 350 m³/h |
| Refrigerant | R290 |
| Noise Level | 52 dB(A) |
| Dehumidification Capacity | 1.5 L/h |
| Timer Function | 24-hour programmable timer |
| Remote Control | Yes, included |
| Number of Fan Speeds | 3 |
| Auto Swing | Yes |
| Filter Type | Washable mesh filter |
| Maintenance | Clean filter every 2 weeks |
| Safety Features | Auto restart, overheating protection |
| Certifications | CE, CB |
| Included Accessories | Exhaust hose, window kit, remote control |
| Energy Efficiency Ratio (EER) | 2.5 |
| Warranty | 2 years |
Frequently Asked Questions - BEHPGH 121 BEKO
How do I install the exhaust hose?
Connect the exhaust hose to the unit and extend it to an open window or door using the included window kit. Ensure the hose is not kinked for proper airflow.
What is the cooling area for this air conditioner?
The BEHPGH 121 is designed to cool rooms up to approximately 30 square meters (320 square feet) under normal conditions.
How should I clean the filter?
Remove the filter from the unit and wash it with warm water and mild detergent. Let it dry completely before reinstalling. Clean every two weeks for optimal performance.
Why is the unit not cooling properly?
Check if the filter is dirty, the exhaust hose is blocked, or the room is too large. Also ensure the unit is in cooling mode and the set temperature is lower than room temperature.
Can I use an extension cord?
It is recommended to plug the unit directly into a wall outlet. If an extension cord is necessary, use a heavy-duty cord rated for at least 15 amps to avoid overheating.
How do I set the timer?
Press the Timer button on the remote or control panel. Use the + and - buttons to set the desired time for the unit to turn on or off automatically. Confirm by pressing the Timer button again.
What does error code E1 mean?
Error code E1 indicates a room temperature sensor failure. Try turning the unit off and unplugging it for a few minutes. If the error persists, contact customer support.
How do I drain water from the unit?
In cooling mode, water is usually evaporated. If water accumulates, locate the drainage plug at the back and drain it into a bucket. In dehumidifier mode, continuous drainage may be required using a hose.
Is it safe to leave the air conditioner on overnight?
Yes, the unit has safety features like auto restart and overheating protection. However, ensure proper ventilation and avoid blocking the air intake.
How do I switch to fan mode?
Press the Mode button repeatedly until the fan icon appears on the display. In fan mode, the compressor does not run, and only the fan circulates air.
User questions about BEHPGH 121 BEKO
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Air Conditioning in PDF format for free! Find your manual BEHPGH 121 - BEKO and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. BEHPGH 121 by BEKO.
USER MANUAL BEHPGH 121 BEKO
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : BEKO
Model : BEHPGH 121
Category : Air Conditioning