BEMPF 181 - Air conditioner BEKO - Free user manual and instructions
Find the device manual for free BEMPF 181 BEKO in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Portable air conditioner (monoblock) |
| Brand | BEKO |
| Model | BEMPF 181 |
| Cooling capacity | 18000 BTU/h (approx. 5.27 kW) |
| Airflow speed | 3 fan speeds |
| Air discharge | Auto swing louvres |
| Timer | 24-hour programmable timer |
| Remote control | Yes, included |
| Dimensions (WxHxD) | Approx. 450 x 700 x 350 mm |
| Weight | Approx. 28 kg |
| Power supply | 220-240 V, 50 Hz |
| Power input | Approx. 1800 W |
| Refrigerant | R290 (flammable) |
| Dehumidification | Yes, approx. 1.5 L/h |
| Noise level | Max. 65 dB(A) |
| Air filter | Washable dust filter |
| Mobility | 4 castor wheels |
| Self-evaporation | Yes, for most operating conditions |
| Drain hose connection | Yes, for continuous drainage |
| Maintenance | Regularly clean the air filter and wipe the exterior |
| Safety features | Overheat protection, compressor delay |
| Spare parts availability | Filters, hoses, remote controls available from authorised service |
Frequently Asked Questions - BEMPF 181 BEKO
How do I install the BEKO BEMPF 181 air conditioner?
Place the unit on a flat, stable surface near a window or door. Install the exhaust hose securely into the window kit, ensuring it is as short as possible for optimal cooling. Connect the power cord to a suitable socket, then press the ON/OFF button on the control panel or remote to start.
How do I clean the air filter?
Turn off the unit and unplug it. Remove the air filter from the back or side, rinse it under lukewarm water with mild detergent, and let it dry completely. Do not use a dryer or expose it to direct sunlight. Reinstall the filter after it is dry.
What should I do if the air conditioner does not cool?
Check if the air filter is dirty and clean it if necessary. Ensure all windows and doors are closed and that the exhaust hose is not blocked or kinked. Verify that the set temperature is lower than the room temperature and that the unit is in cooling mode. If the problem persists, contact an authorized service center.
How do I set the timer?
Use the remote control to access the timer function. Press the TIMER button repeatedly to select the desired delay (1-24 hours). The timer can be used to automatically turn the unit off or on, depending on the current state. Confirm the setting and the display will show the active timer.
Can I use the air conditioner in 'cooling only' mode?
Yes, the BEKO BEMPF 181 is primarily a cooling-only model. It is designed to cool the air and remove excess humidity. Use the mode button to select COOL, and adjust the temperature and fan speed as needed. It does not provide heating functionality.
How do I drain the condensed water?
In most conditions, the unit self-evaporates the water. However, in very humid weather, the internal water tank may fill up. When the water tank is full, the unit will beep and the display shows 'FL' or similar. Turn off the unit, unplug it, and remove the drain plug or connect a drain hose to the bottom drain outlet to let the water flow out.
What safety precautions should I take?
Always connect the unit to a properly grounded socket with the correct voltage. Do not use extension cords or multi-plug adapters. Keep the unit away from water and never spray liquids on it. Do not cover the inlet or outlet vents. Ensure the refrigerant circuit is not damaged. If the power cord is damaged, replace it only at an authorized service center.
Does the unit require regular maintenance?
Yes, regular maintenance is essential for optimal performance. Clean the air filter every two weeks or more often in dusty rooms. Clean the exterior with a dry cloth. Check the exhaust hose for blockages and ensure the area around the unit is free of obstructions. Schedule an annual professional check-up to maintain efficiency.
How do I store the unit at the end of the season?
Turn off the unit and unplug it. Empty any water from the internal tank completely. Clean the air filter and dry it. Collect the exhaust hose and accessories. Place the unit back in its original packaging or cover it with a protective cloth. Store it in a dry, cool place away from direct sunlight.
Where can I find spare parts?
Spare parts such as air filters, exhaust hoses, window kits, and remote controls can be obtained from BEKO authorized service centers or official spare parts distributors. Use the model number BEMPF 181 when ordering. For the best compatibility, always use genuine BEKO parts.
User questions about BEMPF 181 BEKO
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Air conditioner in PDF format for free! Find your manual BEMPF 181 - BEKO and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. BEMPF 181 by BEKO.
USER MANUAL BEMPF 181 BEKO
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : BEKO
Model : BEMPF 181
Category : Air conditioner