AF-6 - Fan Antari - Free user manual and instructions
Find the device manual for free AF-6 Antari in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | High-Output Fan for Fog Effects |
| Brand | Antari |
| Model | AF-6 |
| Dimensions (W x H x D) | 500 x 400 x 400 mm |
| Weight | 15 kg |
| Power Supply | 230 V AC, 50 Hz |
| Power Consumption | 800 W |
| Fan Speed Control | Variable via DMX or manual knob |
| DMX Channels | 1 or 2 (selectable) |
| Airflow | Up to 30 m/s |
| Noise Level | < 65 dB(A) |
| Protection Class | IP20 (indoor use only) |
| Safety Features | Thermal overload protection, fuse |
| Mounting Options | Floor stand, hanging bracket (optional) |
| Housing Material | Steel with powder coating |
| Fan Blade Diameter | 300 mm |
| Compatible Fluids | Water-based fog fluids only |
| Maintenance | Regularly clean grilles and blades with compressed air; lubricate motor bearings annually |
| Spare Parts Availability | Fan blades, motor, power supply, DMX board |
| Repairability | Modular design; user-replaceable parts with basic tools |
| General Information | Designed for professional use in theaters, clubs, and events; reliable performance |
Frequently Asked Questions - AF-6 Antari
How do I connect the AF-6 fan to a DMX controller?
Use a standard 3-pin XLR cable to connect the DMX input of the fan to your controller. Set the DMX address using the DIP switches on the rear panel. The fan can operate in 1 or 2 channel mode.
What type of fog fluid can I use with the AF-6?
Only use water-based fog fluids. Oil-based fluids may damage the fan and motor. Antari recommends their own brand of fluid for optimal performance.
Can I mount the AF-6 overhead?
Yes, the AF-6 has mounting points for optional hanging brackets. Ensure the bracket is rated for the weight of the fan and that the installation is secure. Always use safety cables.
How do I clean the fan?
Disconnect power before cleaning. Use compressed air to remove dust from the grilles and fan blades. For stubborn dirt, lightly dampen a cloth with water. Do not use solvents.
What is the maximum distance for DMX control?
DMX signals can travel up to 300 meters (1000 feet) with proper cabling. Use a terminator at the end of the chain to avoid signal reflection.
The fan does not start. What should I check?
First, check the power connection and fuse. Ensure the fan is not in thermal overload mode (wait for it to cool). Verify DMX signal if using DMX mode. If the problem persists, contact Antari service.
Can I control the fan speed manually?
Yes, the AF-6 has a manual speed control knob on the rear panel. In manual mode, you can adjust the fan speed from minimum to maximum.
Is the AF-6 compatible with 120V power?
The standard AF-6 is designed for 230V AC. For 120V markets, a specific model or step-up transformer may be required. Check the voltage rating on your unit.
How often should I lubricate the motor?
Annually, or after approximately 500 hours of operation. Use a lightweight machine oil on the bearing points. Over-lubrication can attract dust.
Where can I purchase replacement parts?
Contact your local Antari dealer or visit the Antari website. Common spare parts like fan blades and motors are available. Always use genuine parts.
User questions about AF-6 Antari
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Fan in PDF format for free! Find your manual AF-6 - Antari and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. AF-6 by Antari.
USER MANUAL AF-6 Antari
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Antari
Model : AF-6
Category : Fan