LED TMH-W400 - Lighting Eurolite - Free user manual and instructions
Find the device manual for free LED TMH-W400 Eurolite in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | LED Moving Head Wash Light |
| Model | LED TMH-W400 |
| Brand | Eurolite |
| Light Source | 400W LED Module |
| Beam Angle | 8° - 60° (Motorized Zoom) |
| Pan Range | 540° |
| Tilt Range | 270° |
| Color Wheel | 14 Colors + White |
| Gobo Wheel | 8 Rotating Gobos + Open |
| Effects | Prism, Frost, Dimmer 0-100%, Strobe |
| Control Protocol | DMX512 (16/18/34 Channels) |
| Display | OLED Screen with Touch Buttons |
| Power Supply | AC 100-240V, 50/60Hz |
| Power Consumption | 550W |
| Dimensions (L x W x H) | 380 x 280 x 520 mm |
| Weight | 16 kg |
| Housing | Metal and High-Impact Flame-Retardant Plastic |
| Cooling | Temperature-Controlled Fans |
| IP Rating | IP20 (Indoor Use Only) |
| Connectors | 3-pin XLR DMX In/Out, PowerCon In/Out |
| Operating Temperature | 0°C to 40°C |
| Included Accessories | Omega Brackets, Power Cord, DMX Cable, User Manual |
| Safety | Safety cable attachment point, overheat protection |
| Maintenance | Clean lens with dry cloth, check fan openings regularly |
| Spare Parts | LED module, gobos, color filters, fans, power supply |
Frequently Asked Questions - LED TMH-W400 Eurolite
How do I connect the Eurolite LED TMH-W400 to a DMX controller?
Use a 3-pin XLR cable to connect the DMX output of your controller to the DMX input of the fixture. Set the DMX address via the OLED menu. Refer to the manual for addressing details.
What is the recommended power supply for this fixture?
The fixture operates on AC 100-240V, 50/60Hz. Always use a grounded outlet and avoid daisy-chaining more than 2 fixtures on a single power circuit.
How can I change the gobos?
Turn off and unplug the fixture. Open the gobo wheel access panel, remove the gobo holder, and insert a new gobo. Ensure the gobo is correctly oriented. Reassemble and test.
The fixture does not respond to DMX. What should I do?
Check the DMX cable connection and ensure the controller is sending data. Verify the DMX address on the fixture matches the controller. Also, check the termination resistor (120 ohm) on the last device.
How often should I clean the lens and housing?
Clean the lens with a soft, dry cloth after each use to prevent dust buildup. Monthly, inspect and clean fan vents with compressed air to avoid overheating.
Can I use this fixture outdoors?
No, the LED TMH-W400 is rated IP20 for indoor use only. Exposure to rain or moisture can cause electrical shock or damage.
What is the maximum ambient temperature for operation?
The operating temperature range is 0°C to 40°C (32°F to 104°F). Avoid using in extreme heat or cold to ensure reliable performance.
How do I reset the fixture to factory settings?
Navigate to the 'Settings' menu on the OLED display, select 'Factory Reset', and confirm. The fixture will restart with default settings.
The head moves erratically. What could be the issue?
Check for mechanical obstructions, ensure the fixture is level, and recalibrate the pan/tilt limits via the menu. If the problem persists, internal sensors may need service.
Where can I purchase spare parts?
Contact Eurolite customer service or authorized dealers. Common spare parts include LED modules, gobos, color filters, fans, and power supplies.
User questions about LED TMH-W400 Eurolite
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Lighting in PDF format for free! Find your manual LED TMH-W400 - Eurolite and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. LED TMH-W400 by Eurolite.
USER MANUAL LED TMH-W400 Eurolite
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Eurolite
Model : LED TMH-W400
Category : Lighting