LED KLS Laser Bar PRO - Lighting Eurolite - Free user manual and instructions
Find the device manual for free LED KLS Laser Bar PRO Eurolite in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | LED/Laser Light Bar |
| Brand | Eurolite |
| Model | LED KLS Laser Bar PRO |
| Power Supply | AC 100-240V, 50/60Hz |
| Power Consumption | Approx. 200 W |
| Dimensions (L x W x H) | 1100 x 250 x 200 mm |
| Weight | 6.5 kg |
| Light Source | LED and Laser (red, green, blue) |
| Number of LEDs | 12x 3W RGBW LEDs |
| Laser Class | Class 3B |
| Laser Wavelength | Red: 650 nm, Green: 532 nm, Blue: 450 nm |
| DMX Channels | 14 / 22 / 26 channels |
| Control Protocols | DMX512, Standalone, Master/Slave, Sound-Active |
| Operating Modes | Auto, Sound, DMX, Master/Slave |
| Housing Material | Metal and plastic |
| Cooling | Active fan ventilation |
| IP Rating | IP20 (indoor use only) |
| Included Accessories | Power cable, DMX cable, mounting bracket, user manual |
| Safety Features | Laser safety key, emergency stop, safety loop |
| Maintenance | Clean with a dry, soft cloth; avoid moisture; do not open the housing |
| Repairability / Spare Parts | LED modules, laser diodes, power supply, control board available |
Frequently Asked Questions - LED KLS Laser Bar PRO Eurolite
How do I connect the LED KLS Laser Bar PRO to a DMX controller?
Use a standard DMX cable (3-pin XLR) to connect the DMX IN of the fixture to the DMX OUT of your controller. Set the desired DMX address on the fixture's menu.
What are the operating modes of this light bar?
The fixture offers Auto (built-in programs), Sound (music-activated), DMX (external controller), and Master/Slave (synchronized operation of multiple units).
Is the laser safe for public use?
The laser is Class 3B, which can be hazardous to eyes if directly exposed. Always follow safety guidelines: never point at eyes, ensure the safety key is removed when not in use, and use the safety loop.
How do I clean the fixture?
Disconnect the power, then clean the housing with a dry, soft cloth. Avoid using liquids or abrasives that could damage the lens or electronics.
Can I use this fixture outdoors?
No, the IP20 rating indicates it is only suitable for indoor use. Protect it from moisture, dust, and extreme temperatures.
How many DMX channels does it use?
The LED KLS Laser Bar PRO can operate in three channel modes: 14, 22, or 26 channels, allowing different levels of control over the LED colors, patterns, and laser effects.
What is the power consumption?
The typical power consumption is approximately 200 W, depending on the operating mode and intensity.
How do I set the DMX address?
Press the MENU button to enter the settings, navigate to 'DMX Address', then use the UP/DOWN buttons to set the desired address. Press ENTER to confirm.
Why is the fixture not responding to DMX?
Check that the DMX cable is properly connected and not damaged. Ensure the DMX address matches the controller. Verify that the controller is set to the correct universe and that the fixture is in DMX mode.
Can I replace the laser or LEDs myself?
We recommend contacting a qualified technician or Eurolite service center for replacement, as the fixture contains high-voltage and laser components. Only open the housing if you are trained and have the necessary tools.
User questions about LED KLS Laser Bar PRO Eurolite
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Lighting in PDF format for free! Find your manual LED KLS Laser Bar PRO - Eurolite and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. LED KLS Laser Bar PRO by Eurolite.
USER MANUAL LED KLS Laser Bar PRO Eurolite
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Eurolite
Model : LED KLS Laser Bar PRO
Category : Lighting