LED KLS-190 - Lighting Eurolite - Free user manual and instructions
Find the device manual for free LED KLS-190 Eurolite in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | LED DMX Lighting Bar |
| Model | LED KLS-190 |
| Brand | Eurolite |
| Dimensions (L x W x H) | 320 x 180 x 130 mm |
| Weight | 1.8 kg |
| Power Supply | AC 100-240V, 50/60Hz |
| Power Consumption | 30W |
| LED Type | 4 x 3W RGBW LEDs |
| Beam Angle | 25 degrees |
| DMX Channels | 4 or 8 selectable |
| Control Modes | DMX, Master/Slave, Sound Activation, Auto |
| Housing Material | Metal with black finish |
| Cooling | Passive convection |
| Protection Rating | IP20 |
| Mounting | Floor standing or hanging bracket |
| Operating Temperature | 0°C to 40°C |
| Fuse | 1A, 250V (5x20mm) |
| Accessories Included | Power cord, mounting bracket, user manual |
| Cleaning | Use a dry, soft cloth; avoid moisture |
| Safety | Operate with grounded outlet; keep away from flammable materials |
Frequently Asked Questions - LED KLS-190 Eurolite
How do I connect the LED KLS-190 to a DMX controller?
Use a standard 3-pin XLR cable to connect the DMX IN of the fixture to the DMX output of your controller. Set the DMX address via the DIP switches or menu.
What is the maximum number of units in a daisy chain?
You can daisy-chain up to 32 units using DMX cables. Ensure proper termination at the last fixture.
How do I clean the fixture?
Disconnect from power. Use a dry, lint-free cloth to gently wipe the housing and lens. Do not use liquids or abrasive cleaners.
Can I use this light without a DMX controller?
Yes, you can use standalone modes: sound activation, master/slave, or auto mode. The fixture will respond to music or run built-in programs.
What type of power cord does it use?
It comes with a standard IEC C13 power cord. Use a grounded outlet matching your local voltage (100-240V AC).
How do I set the DMX address on the LED KLS-190?
Use the menu buttons to access DMX settings. Set the address using the up/down buttons. The display shows the current address.
What should I do if the fixture does not power on?
Check the power cord connection and the fuse. If the fuse is blown, replace with a 1A 250V 5x20mm fuse. If problem persists, contact support.
Can I mount the fixture upside down?
Yes, the mounting bracket allows for hanging. Ensure it is securely fastened and do not exceed the maximum load.
How many DMX channels does the fixture use?
It can operate in 4-channel or 8-channel mode. In 4-channel mode, control RGBW. In 8-channel mode, additional effects like strobe and dimmer.
What is the lifespan of the LEDs?
The LEDs are rated for approximately 50,000 hours of operation under normal conditions. Avoid overheating to maximize life.
User questions about LED KLS-190 Eurolite
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Lighting in PDF format for free! Find your manual LED KLS-190 - Eurolite and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. LED KLS-190 by Eurolite.
USER MANUAL LED KLS-190 Eurolite
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Eurolite
Model : LED KLS-190
Category : Lighting