ZI-ABH1700D - Breaker Zipper - Free user manual and instructions
Find the device manual for free ZI-ABH1700D Zipper in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Electric breaker |
| Brand | Zipper |
| Model | ZI-ABH1700D |
| Supply voltage | 230 V ~ 50 Hz |
| Rated power | 1700 W |
| Impact rate | 1800 bpm |
| Impact energy | 25 J |
| Chisel diameter | 30 mm |
| Length | 500 mm |
| Width | 100 mm |
| Height | 250 mm |
| Weight | 17 kg |
| Motor type | Universal with commutator |
| Protection class | II (double insulation) |
| Anti-vibration handle | Yes |
| Switch with lock | Yes |
| Sound pressure level | 90 dB(A) |
| Vibration level | 15 m/s² |
| Operating mode | Chiseling only |
| Included accessories | Flat chisel, pointed chisel, wrench |
| Body material | Aluminum and steel |
| Color | Orange and black |
| Warranty | 2 years |
| Maintenance | Regular greasing and cleaning of air vents |
| Safety | Disconnect before maintenance, wear PPE |
Frequently Asked Questions - ZI-ABH1700D Zipper
How to change the chisel on the Zipper ZI-ABH1700D electric breaker?
To change the chisel, unplug the tool. Use the provided wrench to loosen the chisel holder. Remove the old chisel and insert the new one aligning the notches. Tighten firmly.
How to adjust the impact power?
This model has no variable power adjustment. It operates at full power when turned on.
Why does the tool not start?
First check the power supply and cable. Make sure the switch is in the on position. If the problem persists, the carbon brushes may be worn and need to be replaced.
How to grease the breaker mechanism?
Use a special hammer grease. Apply it via the grease points indicated in the manual. Perform this operation every 50 hours of use.
What accessories can I use with the ZI-ABH1700D?
Use only chisels compatible with the SDS-Max chisel holder (30 mm diameter). Flat chisels, pointed chisels, and picks are recommended.
How to reduce vibrations during use?
Wear anti-vibration gloves and take regular breaks. Maintain constant pressure without forcing. The integrated anti-vibration handle also helps.
Can I use this tool for drilling?
No, the ZI-ABH1700D is a breaker designed only for chiseling. It does not have a rotation function for drilling.
How to maintain the motor carbon brushes?
The carbon brushes are wear parts. Check them every 100 hours of use. Replace them if they measure less than 5 mm. Use genuine Zipper carbon brushes.
What to do in case of device overheating?
Stop the tool immediately and let it cool down. Check that the ventilation slots are not blocked. If overheating recurs, consult a professional.
What oil to use for lubrication?
Do not use oil, only specific grease for breaker hammers. Oil can damage the seals.
User questions about ZI-ABH1700D Zipper
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Breaker in PDF format for free! Find your manual ZI-ABH1700D - Zipper and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. ZI-ABH1700D by Zipper.
USER MANUAL ZI-ABH1700D Zipper
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Zipper
Model : ZI-ABH1700D
Category : Breaker