HD4347 - Receiver Krüger&Matz - Free user manual and instructions
Find the device manual for free HD4347 Krüger&Matz in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Stereo Receiver |
| Brand | Krüger&Matz |
| Model | HD4347 |
| Dimensions (W x H x D) | 430 x 105 x 280 mm |
| Weight | 5.2 kg |
| Power Output | 2 x 100 W (8 ohms) |
| Frequency Response | 20 Hz - 20 kHz |
| Total Harmonic Distortion | < 0.05% |
| Signal-to-Noise Ratio | 100 dB |
| Inputs | 4x RCA, 1x Phono, 1x Optical, 1x Coaxial, Bluetooth |
| Outputs | Speaker terminals (binding posts), Subwoofer pre-out, Headphone jack |
| Power Supply | AC 230V, 50 Hz |
| Power Consumption | 350 W (max), 0.5 W (standby) |
| Main Functions | AM/FM tuner, Bluetooth streaming, multiple audio inputs, tone control (bass/treble), remote control included |
| Maintenance & Cleaning | Wipe with a dry cloth; avoid solvents; ensure ventilation slots are clear; clean connectors with contact cleaner if needed |
| Safety Precautions | Do not expose to moisture; do not block ventilation; use only specified voltage; disconnect during storms |
| Spare Parts & Repairability | Contact authorized service center; spare parts available for 5 years after discontinuation |
| General Information | Compatible with speakers 4-16 ohms; FM antenna included; user manual in PDF on notice-facile.com |
Frequently Asked Questions - HD4347 Krüger&Matz
How do I connect the receiver to my TV?
Use an optical or coaxial digital audio cable from your TV's audio output to the corresponding input on the receiver. Alternatively, use RCA cables if your TV has analog outputs.
Can I stream music via Bluetooth?
Yes, the HD4347 supports Bluetooth streaming. Enable Bluetooth on your device, select 'HD4347' from the list, and play your music.
What is the maximum speaker impedance?
The receiver supports speakers with an impedance of 4 to 16 ohms. Ensure your speakers are within this range.
How do I reset the receiver to factory settings?
Turn off the receiver, then press and hold the 'Source' button while turning it back on. Hold until 'Reset' appears on the display.
Why is there no sound from the speakers?
Check that speakers are properly connected and the correct input is selected. Also ensure the volume is not muted and the receiver is not in standby mode.
How do I tune radio stations?
Press the 'Tuner' button to select FM or AM. Use the 'Seek' or 'Manual' tuning buttons to find stations. You can save presets by holding a number button.
Can I connect a turntable?
Yes, use the 'Phono' input. Ensure your turntable has a moving magnet (MM) cartridge; the receiver has a built-in phono preamp.
What is the power consumption in standby?
Standby power consumption is less than 0.5 watts, making it energy efficient.
How do I clean the receiver?
Use a soft, dry cloth. Avoid liquids or aerosols. Ensure ventilation slots are dust-free for proper cooling.
Where can I find the user manual?
The user manual is available for free download on notice-facile.com in PDF format. Search for 'Krüger&Matz HD4347'.
User questions about HD4347 Krüger&Matz
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Receiver in PDF format for free! Find your manual HD4347 - Krüger&Matz and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. HD4347 by Krüger&Matz.
USER MANUAL HD4347 Krüger&Matz
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Krüger&Matz
Model : HD4347
Category : Receiver