SF100 - Uncategorized Beha-Amprobe - Free user manual and instructions
Find the device manual for free SF100 Beha-Amprobe in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Non-contact voltage tester |
| Brand | Beha-Amprobe |
| Model | SF100 |
| Dimensions | 168 x 72 x 35 mm |
| Weight | 160 g |
| Power supply | 2 AAA batteries 1.5 V |
| Display | LCD display with backlight |
| Voltage range | 12 V to 1000 V AC/DC |
| Frequency | 50/60 Hz |
| Overvoltage category | CAT IV 600 V, CAT III 1000 V |
| Key features | Non-contact voltage detection, continuity test, phase indicator |
| Protection rating | IP50 |
| Operating temperature | -10 °C to 50 °C |
| Maintenance and cleaning | Clean with a slightly damp cloth and mild soap |
| Safety | Double insulation, CE compliance, IEC 61010-1 |
| Spare parts and repairability | Batteries (AAA), replacement test leads, repair by authorized center |
| Warranty | 2 years |
Frequently Asked Questions - SF100 Beha-Amprobe
How to turn on the SF100?
Press the power button on the side of the device. An audible signal indicates power on.
How to test voltage non-contact?
Bring the tip of the SF100 close to the conductor or outlet. The red indicator lights up and a beep sounds when voltage is present.
How to change the batteries of the SF100?
Turn off the device, remove the battery compartment cover on the back, replace the two AAA batteries observing polarity.
What to do if the SF100 does not turn on?
Check the batteries: if they are low, replace them. If the problem persists, contact customer service.
Is the SF100 suitable for domestic installations?
Yes, it is suitable for testing outlets, switches and cables up to 1000 V in safety category CAT III.
Can I test continuity with the SF100?
Yes, use the continuity test function: the device beeps if the resistance is below 50 Ω.
How to clean the SF100?
Use a soft cloth slightly damp with soapy water. Do not use solvents or bleach.
Where to find the user manual of the SF100?
The manual is available in PDF format on notice-facile.com or from the manufacturer Beha-Amprobe.
What is the warranty of the SF100?
The SF100 is covered by a two-year warranty against manufacturing defects and materials.
How to identify ghost voltage?
The SF100 features a non-contact voltage detector that distinguishes real voltages from induced (ghost) voltages thanks to its high sensitivity.
User questions about SF100 Beha-Amprobe
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual SF100 - Beha-Amprobe and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SF100 by Beha-Amprobe.
USER MANUAL SF100 Beha-Amprobe
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Beha-Amprobe
Model : SF100
Category : Uncategorized