AT-6020-EUR - Uncategorized Beha-Amprobe - Free user manual and instructions
Find the device manual for free AT-6020-EUR Beha-Amprobe in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Cable tracer and signal locator |
| Brand | Beha-Amprobe |
| Model | AT-6020-EUR |
| Dimensions (L x W x H) | 200 x 90 x 40 mm |
| Weight | 400 g (with batteries) |
| Power supply | 2 x 9V batteries (LR61) or optional rechargeable battery |
| Battery life | Approximately 40 hours of continuous use |
| Signal frequencies | 125 kHz and 33 kHz |
| Detection voltage range | 0 – 600 V AC/DC |
| Sensitivity adjustment | Yes, via dial or buttons |
| Display | LCD screen with backlight |
| Audible indication | Yes, built-in buzzer |
| Visual indication | Yes, indicator LED |
| Included accessories | Power adapter, test probe, alligator clips, carrying case |
| Maintenance and cleaning | Clean with a soft, dry cloth. Do not use solvents or abrasive products. |
| Safety | Complies with CE standards. Overvoltage category CAT IV 300V / CAT III 600V |
| Spare parts and repairability | Parts available upon request from customer service. 2-year warranty. |
| General information | Manual available in multiple languages. PDF manual pages: 412 pages. |
Frequently Asked Questions - AT-6020-EUR Beha-Amprobe
How to calibrate the AT-6020-EUR?
The device calibrates automatically when powered on. For manual recalibration, refer to section 5 of the manual.
What is the maximum detection range?
The range depends on the cable type and environmental conditions. In open areas, it can reach up to 1.5 km.
Can I use the AT-6020-EUR on live cables?
Yes, the device is designed to detect live cables up to 600 V AC/DC. Follow the safety instructions in the manual.
How to replace the batteries?
Open the battery compartment on the back of the device by sliding the cover. Insert two 9V batteries, observing polarity.
What to do if the screen does not turn on?
Check the batteries (charge and orientation) and the compartment. If the problem persists, contact customer service.
Can the AT-6020-EUR detect cables in walls?
Yes, the 'Tracer' mode allows you to follow cable paths in walls or underground, provided they are live or connected to the signal generator.
How to clean the device?
Use a soft, slightly damp cloth. Never use solvents, alcohol, or abrasive products.
Is there a warranty?
Yes, the AT-6020-EUR comes with a 2-year warranty against manufacturing defects. Keep the purchase receipt.
Can I download the manual in French?
Yes, the French manual is available for free on notice-facile.com in PDF format.
How to identify a fuse with the AT-6020-EUR?
Use the 'Fuse search' mode: connect the generator to the fuse, then scan the electrical panel with the receiver probe until you hear a clear audible signal.
User questions about AT-6020-EUR Beha-Amprobe
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual AT-6020-EUR - Beha-Amprobe and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. AT-6020-EUR by Beha-Amprobe.
USER MANUAL AT-6020-EUR Beha-Amprobe
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Beha-Amprobe
Model : AT-6020-EUR
Category : Uncategorized