PLL-576 CW - Lamp Eurolite - Free user manual and instructions
Find the device manual for free PLL-576 CW Eurolite in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | LED Par Light |
| Model | PLL-576 CW |
| Brand | Eurolite |
| Light Source | 576 cool white LEDs |
| Color Temperature | 6500K (cool white) |
| Beam Angle | 15° |
| Power Consumption | 120W |
| Input Voltage | AC 100-240V, 50/60Hz |
| Dimensions (L x W x H) | 250 x 250 x 350 mm |
| Weight | 1.5 kg |
| DMX Control | Yes, 1 channel |
| DMX Connectors | 3-pin XLR input/output |
| Control Modes | DMX, Master/Slave, Sound-activated, Stand-alone |
| Mounting | Floor stand or hanging bracket |
| Cooling | Passive (convection) |
| IP Rating | IP20 (indoor use only) |
| Safety Class | Class I (with ground connection) |
| Maintenance | Clean with a dry cloth; do not use solvents |
| Spare Parts | LED modules, power supply, control board |
| Repair | Refer to qualified technician; no user-serviceable parts |
| General Information | Manufactured by Eurolite, Germany. Compiles with CE standards. |
Frequently Asked Questions - PLL-576 CW Eurolite
How do I connect the PLL-576 CW to a DMX controller?
Use a 3-pin XLR cable to connect the DMX input of the fixture to the output of your controller. Set the DMX address using the DIP switches or menu (refer to manual). Ensure termination at the last fixture.
Can I use this lamp in stand-alone mode without a DMX controller?
Yes, the PLL-576 CW has a stand-alone mode. Use the menu to select built-in programs or sound activation. The lamp will run without external control.
How do I clean the fixture?
Disconnect power before cleaning. Use a soft, dry cloth to wipe the housing. Avoid abrasive cleaners or solvents. Clean the LED lens with a lens cleaning solution if necessary.
What is the beam angle and field angle?
The beam angle is 15°, providing a narrow beam. The field angle is typically larger. This makes the fixture suitable for spotlighting or creating tight pools of light.
Can I replace the LEDs myself?
No, the LEDs are non-user-replaceable. If an LED fails, contact Eurolite service or a qualified technician for repair. Attempting replacement may void warranty.
What is the maximum ambient temperature for safe operation?
Do not operate the fixture at ambient temperatures above 40°C (104°F). Ensure adequate ventilation around the housing to prevent overheating.
How do I set the DMX address?
Use the control menu on the rear panel to set the DMX address. Navigate using the buttons, select DMX address, and set a value between 1 and 512. Press Enter to confirm.
Is this fixture suitable for outdoor use?
No, the PLL-576 CW is rated IP20 and intended for indoor use only. Exposure to moisture or dust may damage the fixture and create safety hazards.
What power cable is included?
The fixture comes with a powerCON-compatible AC power cord. Check the manual for the specific connector type.
How do I perform a factory reset?
Press and hold the Menu button while powering on the fixture. Select 'Factory Default' from the menu and confirm. The fixture will reset to its initial settings.
User questions about PLL-576 CW Eurolite
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Lamp in PDF format for free! Find your manual PLL-576 CW - Eurolite and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. PLL-576 CW by Eurolite.
USER MANUAL PLL-576 CW Eurolite
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Eurolite
Model : PLL-576 CW
Category : Lamp