LED PLL-360 - Lamp Eurolite - Free user manual and instructions
Find the device manual for free LED PLL-360 Eurolite in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | LED PAR Can |
| Model | LED PLL-360 |
| Brand | Eurolite |
| Power Consumption | 36 W |
| Light Source | 36 x 1 W LEDs (RGB or single color) |
| Beam Angle | 25° (typical) |
| Voltage | 100-240 V AC, 50/60 Hz |
| Dimensions (L x W x H) | 200 x 200 x 300 mm |
| Weight | 2.0 kg |
| Control | DMX512, Master/Slave, Sound activation |
| DMX Channels | 4/7/10 channel modes |
| Housing Material | Aluminum, black finish |
| Cooling | Passive convection |
| Operating Temperature | -10°C to 40°C |
| Ingress Protection | IP20 (indoor use) |
| Mounting Options | Floor stand, truss clamp, hanging bracket |
| Safety Features | Overheat protection, safety loop |
| Maintenance | Clean lens with soft, dry cloth; avoid solvents |
| Spare Parts Available | LED modules, power supply, control board |
| Repairability | Modular design; parts replaceable by qualified technician |
Frequently Asked Questions - LED PLL-360 Eurolite
How do I connect the LED PLL-360 to a DMX controller?
Use a 3-pin XLR cable to connect the DMX IN of the fixture to your controller. Set the DMX address using the display menu. Ensure proper termination on the last fixture.
Can the fixture operate without DMX?
Yes, it supports Master/Slave mode and Sound activation for standalone use. Select the desired mode via the control panel.
What is the recommended voltage?
The fixture accepts 100-240 V AC, 50/60 Hz. It can be used worldwide with the appropriate power cord.
How do I clean the lens?
Use a soft, dry cloth. If necessary, slightly dampen with water. Do not use alcohol or abrasive cleaners to avoid damaging the lens.
Can I replace the LEDs myself?
LED replacement should be done by a qualified technician due to the risk of electrical shock and damage. Contact Eurolite support for spare parts.
What is the maximum ambient temperature for operation?
The operating temperature range is -10°C to 40°C (14°F to 104°F). Avoid using the fixture in direct sunlight or near heat sources.
How do I link multiple fixtures in Master/Slave?
Set one fixture as Master (e.g., DMX channel 1 or Auto mode) and others as Slave (DMX address 512 or Slave mode). Connect them via XLR cables.
Does the fixture support power linking?
Yes, it has power in/out connectors (PowerCON compatible). Do not exceed the maximum current rating (e.g., 10A) when daisy-chaining.
What does the 'PLL-360' model name mean?
PLL likely stands for Professional LED Light, and 360 may refer to the total LED count (36 x 10W) or beam angle. Check specification for exact details.
Is the fixture suitable for outdoor use?
No, it has an IP20 rating, meaning it is not waterproof. Use only indoors or under a weatherproof cover.
User questions about LED PLL-360 Eurolite
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Lamp in PDF format for free! Find your manual LED PLL-360 - Eurolite and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. LED PLL-360 by Eurolite.
USER MANUAL LED PLL-360 Eurolite
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Eurolite
Model : LED PLL-360
Category : Lamp