LED IP FL-8 - Lamp Eurolite - Free user manual and instructions
Find the device manual for free LED IP FL-8 Eurolite in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | LED Floodlight |
| Model | LED IP FL-8 |
| Brand | Eurolite |
| Light Source | 8x 10W RGBWA+UV LEDs |
| Power Consumption | 120W |
| Input Voltage | 100-240V AC, 50/60Hz |
| IP Rating | IP65 |
| Beam Angle | 25° |
| DMX Channels | 6/9/10/14 selectable |
| Dimensions (W x H x D) | 280 x 230 x 120 mm |
| Weight | 2.1 kg |
| Housing Material | Aluminum, die-cast |
| Cooling | Passive convection |
| Mounting | Bracket with adjustment knob |
| Control Modes | DMX, master/slave, auto, sound |
| Display | LED control panel with buttons |
| Environment | Outdoor, weatherproof |
| Maintenance | Clean lens with soft dry cloth; ensure seals intact |
| Safety | Use only with specified power; do not open; avoid moisture ingress |
| Spare Parts | LED modules and power supply available from Eurolite |
Frequently Asked Questions - LED IP FL-8 Eurolite
How do I set the DMX address on the LED IP FL-8?
Press the 'Menu' button to enter the control panel. Use the up/down buttons to navigate to 'DMX Address'. Press 'Enter', then set the desired address using up/down. Press 'Enter' again to confirm.
Is the LED IP FL-8 suitable for outdoor use?
Yes, it has an IP65 rating, meaning it is dust-tight and protected against water jets. However, ensure all cable connections are properly sealed to maintain the rating.
What is the beam angle of the fixture?
The beam angle is 25°, which provides a narrow, concentrated beam suitable for highlighting objects or areas.
How do I clean the fixture?
Use a soft, dry or slightly damp cloth to wipe the lens and housing. Avoid using harsh chemicals or abrasive materials. Check the rubber seals regularly for damage.
Can I use the fixture in master/slave mode?
Yes, set one unit as master (DMX mode with no cable) and others as slave (slave mode). They will sync automatically. Ensure all slaves have the same DMX settings.
What power supply does the LED IP FL-8 require?
It requires 100-240V AC, 50/60Hz via the included power cord. Do not use a dimmer or non-standard power source.
How many DMX channels does it use?
It supports multiple channel modes: 6, 9, 10, or 14 channels. Choose via the control panel to match your controller's needs.
What should I do if the fixture doesn't power on?
Check the power cable connection and fuse. Ensure the mains switch is on. If still off, consult a qualified technician; do not attempt internal repairs.
Can I replace the LEDs myself?
LED modules are not user-serviceable. Contact Eurolite service or an authorized dealer for replacement. Tampering may void warranty.
What mounting options are available?
The fixture comes with a sturdy mounting bracket that allows tilting. It can be placed on the floor, truss, or mounted to a wall using the provided holes.
User questions about LED IP FL-8 Eurolite
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Lamp in PDF format for free! Find your manual LED IP FL-8 - Eurolite and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. LED IP FL-8 by Eurolite.
USER MANUAL LED IP FL-8 Eurolite
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Eurolite
Model : LED IP FL-8
Category : Lamp