5035 - Measuring equipment PeakTech - Free user manual and instructions
Find the device manual for free 5035 PeakTech in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Digital Multimeter (Measuring Equipment) |
| Brand | PeakTech |
| Model | 5035 |
| Display | LCD, 3 3/4 digits (4000 counts) |
| DC Voltage Range | 400 mV, 4 V, 40 V, 400 V, 600 V |
| AC Voltage Range | 400 mV, 4 V, 40 V, 400 V, 600 V |
| DC Current Range | 400 µA, 4000 µA, 40 mA, 400 mA, 10 A |
| AC Current Range | 400 µA, 4000 µA, 40 mA, 400 mA, 10 A |
| Resistance Range | 400 Ω, 4 kΩ, 40 kΩ, 400 kΩ, 4 MΩ, 40 MΩ |
| Capacitance Measurement | 40 nF, 400 nF, 4 µF, 40 µF, 400 µF, 4 mF |
| Frequency Measurement | 10 Hz to 10 MHz |
| Diode Test | Yes |
| Continuity Buzzer | Yes (built-in buzzer) |
| Safety Rating | CAT III 600V, CAT II 600V |
| Power Supply | 9V battery (6F22 / NEDA 1604) |
| Dimensions (approx.) | 185 × 87 × 35 mm |
| Weight (approx.) | 300 g (with battery) |
| Accessories Included | Test leads, 9V battery, user manual |
| Data Hold | Yes |
| Auto Power Off | Yes (approx. 15 minutes) |
| Operating Temperature | 0 °C to 40 °C (32 °F to 104 °F) |
| Storage Temperature | -20 °C to 60 °C (-4 °F to 140 °F) |
| Cleaning | Wipe with a damp cloth; do not use solvents |
| Repairability | Spare parts available through authorized service centers |
Frequently Asked Questions - 5035 PeakTech
How do I measure DC voltage with the PeakTech 5035?
Set the rotary switch to the V DC position. Connect the red test lead to the VΩmA jack and the black lead to COM. Touch the probes to the circuit and read the display. Ensure correct polarity.
What is the maximum current the 5035 can measure?
The meter can measure up to 10 A DC/AC. For currents above 400 mA, use the 10 A jack. Do not exceed 10 A for more than 30 seconds.
How do I replace the battery?
Turn the meter off, remove the screw on the back cover, lift the cover, replace the 9V battery (6F22) with a new one, and close the cover. Always remove test leads first.
What does the 'OL' indication mean?
'OL' stands for Overload. It indicates the measured value exceeds the selected range. Switch to a higher range.
Can I measure AC current with this multimeter?
Yes, set the rotary switch to the ACA position and use the same jacks as for DC current. The meter displays True RMS for accurate readings.
How do I test continuity?
Set the dial to the continuity symbol (diode/continuity). Connect the probes to the circuit. The buzzer sounds if the resistance is less than about 30 Ω.
What safety precautions should I take?
Always start with the highest range. Do not measure voltages above 600V. Use proper test leads rated for at least CAT III 600V. Never touch bare probes.
How accurate is the PeakTech 5035?
Accuracy varies by function. For DC voltage, it's typically ±(0.5% + 2 digits). Check the manual for specific accuracy specs.
Why does the meter auto-power off?
The auto power off feature saves battery life. It shuts off after 15 minutes of inactivity. Turn the dial to OFF and back on to restart.
How do I measure capacitance?
Set the dial to the capacitance symbol (uF). Discharge the capacitor first. Insert the capacitor into the dedicated test socket or use probes. Wait for stable reading.
User questions about 5035 PeakTech
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Measuring equipment in PDF format for free! Find your manual 5035 - PeakTech and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. 5035 by PeakTech.
USER MANUAL 5035 PeakTech
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : PeakTech
Model : 5035
Category : Measuring equipment