LED 10 Watt - Lighting PARKSIDE - Free user manual and instructions
Find the device manual for free LED 10 Watt PARKSIDE in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | LED Light |
| Model | LED 10 Watt |
| Brand | Parkside |
| Power Consumption | 10 W |
| Voltage | 220-240 V ~ 50/60 Hz |
| Luminous Flux | ~800 lm |
| Color Temperature | 4000 K (neutral white) |
| Beam Angle | 120° |
| Lifespan | 25,000 hours |
| Dimensions (approx.) | 120 x 80 x 80 mm |
| Weight (approx.) | 200 g |
| Material | Aluminum + Polycarbonate |
| IP Rating | IP20 (indoor) |
| Dimmable | No |
| Energy Class | A+ |
| Operating Temperature | -20°C to 40°C |
| Connection | Screw terminals |
| Safety Features | Overheating protection |
| Warranty | 2 years |
Frequently Asked Questions - LED 10 Watt PARKSIDE
How do I install the LED 10 Watt light?
Turn off the power at the circuit breaker. Connect the live, neutral, and ground wires to the corresponding screw terminals. Securely mount the light fixture to a ceiling or wall using the provided brackets. Restore power and test.
Can I use this light outdoors?
No, this model has an IP20 rating, meaning it is only suitable for indoor use. Exposure to moisture or rain can damage the light.
Is the LED 10 Watt dimmable?
No, this light is not dimmable. Using a dimmer switch may cause flickering or damage.
What is the expected lifespan of this LED light?
The LED light has a lifespan of approximately 25,000 hours under normal operating conditions.
What color temperature does the light emit?
The light emits a neutral white color temperature of 4000 K, providing a balanced daylight-like illumination.
How should I clean and maintain the light?
Disconnect power before cleaning. Use a soft, dry cloth to wipe the exterior. Avoid using water, solvents, or abrasive cleaners.
What should I do if the light flickers?
Check that all wire connections are secure and the voltage matches specifications. If flickering persists, the LED driver may need replacement.
Can I replace the LED bulb?
No, the LED is integrated into the fixture and cannot be replaced. The entire unit must be replaced if it fails.
What is the beam angle of this light?
The beam angle is 120 degrees, providing wide area coverage suitable for general illumination.
Does the light come with a power plug?
No, this fixture is designed for hardwiring. It does not include a plug and should be connected directly to household wiring.
User questions about LED 10 Watt PARKSIDE
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Lighting in PDF format for free! Find your manual LED 10 Watt - PARKSIDE and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. LED 10 Watt by PARKSIDE.
USER MANUAL LED 10 Watt PARKSIDE
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : PARKSIDE
Model : LED 10 Watt
Category : Lighting