EV-520-CH - Battery charger Beha-Amprobe - Free user manual and instructions
Find the device manual for free EV-520-CH Beha-Amprobe in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Automatic Battery Charger |
| Brand | Beha-Amprobe |
| Model | EV-520-CH |
| Input Voltage | 230 V AC, 50/60 Hz |
| Output Voltage | 12 V / 24 V (automatic or manual selection) |
| Maximum Charging Current | 5 A |
| Compatible Battery Types | Lead-acid (AGM, GEL, liquid) and lithium |
| Protection Functions | Protection against reverse polarity, short circuits, overheating and overvoltage |
| Display | LED indicators for charge status and faults |
| Charging Modes | Standard, fast, float and desulfation |
| Dimensions (L x H x D) | 20 x 15 x 10 cm |
| Weight | 0.5 kg |
| Operating Temperature | -10 °C to +40 °C |
| Protection Rating | IP20 |
| Power Cable Length | 1.5 m |
| Output Cable Length | 1.2 m |
| Maintenance and Cleaning | Disconnect before cleaning; use a dry cloth; do not immerse |
| Spare Parts and Repairability | Contact customer service or refer to the manual for authorized parts |
Frequently Asked Questions - EV-520-CH Beha-Amprobe
What type of battery can I charge with the Beha-Amprobe EV-520-CH?
This charger is suitable for lead-acid batteries (AGM, GEL, liquid) and lithium batteries with a nominal voltage of 12 V or 24 V.
How to choose the correct charging mode?
The charger automatically detects the battery voltage and composition. You can manually select the mode via a button: Standard for normal charging, Fast for accelerated charging, Float for maintenance, and Desulfation for sulfated batteries.
How long does it take to charge a fully discharged battery?
The time depends on the battery capacity. For example, a 12 V battery with 50 Ah (ampere-hours) recharges in about 10 hours with the maximum current of 5 A.
Can I leave the charger connected permanently?
Yes, the charger automatically switches to float mode when the battery is full, preventing overcharging. Therefore, it can remain connected safely.
What should I do if the red LED flashes?
A flashing red LED usually indicates a connection error or a polarity problem. Check that the clamps are correctly connected to the correct battery terminals (+ to +, - to -).
Can the charger be used on a car battery in place?
Yes, first disconnect the battery from the vehicle to avoid voltage spikes. Then connect the charger to the battery terminals. Always follow safety instructions.
How to clean the charger?
Disconnect the charger before any cleaning. Use a dry, soft cloth. Never use liquid or abrasive cleaners, and do not immerse the device.
What is the warranty of the Beha-Amprobe EV-520-CH?
The standard warranty is 2 years from the date of purchase. Keep your receipt as proof of purchase.
Can I charge a lithium battery with this charger?
Yes, the lithium mode is built-in. Make sure the battery is compatible with 12 V or 24 V. The charger adapts the charging curve for LiFePO4 or Li-ion batteries.
Where can I find spare parts?
Contact Beha-Amprobe customer service or an authorized dealer. Use only original parts to ensure safety and performance.
User questions about EV-520-CH Beha-Amprobe
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Battery charger in PDF format for free! Find your manual EV-520-CH - Beha-Amprobe and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. EV-520-CH by Beha-Amprobe.
USER MANUAL EV-520-CH Beha-Amprobe
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Beha-Amprobe
Model : EV-520-CH
Category : Battery charger