ULD-410-EUR - Detector Beha-Amprobe - Free user manual and instructions
Find the device manual for free ULD-410-EUR Beha-Amprobe in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Ultrasonic Leak Detector |
| Brand | Beha-Amprobe |
| Model | ULD-410-EUR |
| Dimensions | 200 x 70 x 30 mm |
| Weight | 200 g (with batteries) |
| Power Supply | 1 9V battery (type 6LR61) |
| Battery Life | Approximately 40 hours of continuous use |
| Detection Method | Ultrasonic (40 kHz ± 2 kHz) |
| Main Functions | Detection of compressed air, gas, steam, vacuum leaks; locating abnormal bearing noises; sensitivity level adjustment; audible (headphone) and visual (LED and bargraph) indicator |
| Sensitivity Range | Continuous adjustment via potentiometer |
| Operating Frequency | 40 kHz |
| Headphone Output | 3.5 mm jack for audio headset |
| Display | LED and 10-segment bargraph |
| Operating Temperature | -10°C to 50°C |
| Operating Humidity | 10% to 90% RH (non-condensing) |
| Housing Material | Impact-resistant ABS plastic |
| Protection Rating | IP40 |
| Package Contents | ULD-410-EUR detector, parabolic adapter, contact adapter, headphones, 9V battery, user manual |
| Care and Cleaning | Wipe with a slightly damp soft cloth; do not use solvents; remove battery if not used for extended periods |
| Safety | Use only in non-explosive environments; do not expose to high heat sources |
| Spare Parts and Repairability | Standard 9V battery, headphones, adapters available optionally; no user-serviceable parts; contact customer service for repairs |
| Certifications | CE, UKCA |
| Warranty | 2 years |
Frequently Asked Questions - ULD-410-EUR Beha-Amprobe
How to use the ULD-410-EUR leak detector?
Turn on the device by pressing the power button. Place the probe near the suspected area. Adjust the sensitivity with the potentiometer. In the presence of a leak, an audible and visual signal (LED and bargraph) will be emitted. Use the headphones to better hear the ultrasounds.
What types of leaks can be detected?
The ULD-410-EUR detects pressurized gas leaks (compressed air, nitrogen, etc.), steam leaks, vacuum leaks, as well as abnormal noises in mechanical bearings.
What battery to use and how to replace it?
Use a 9V battery type 6LR61. Open the battery compartment located on the back of the device, insert the battery respecting polarity, then close the cover.
How long does the battery last?
With a new alkaline battery, the battery life is approximately 40 hours of continuous use. It is recommended to remove the battery if the device is not used for a long time.
How to adjust the sensitivity?
Turn the sensitivity adjustment potentiometer located on the side of the device. Start with low sensitivity and gradually increase until you hear or see an indication. Too high a setting may cause false positives.
What to do if the detector does not turn on?
Check that the battery is correctly installed and charged. If the problem persists, try a new battery. If the device remains inoperative, contact customer service.
Can I use the device outdoors?
Yes, but avoid rain or excessive humidity conditions. The device has IP40 protection, it should not be immersed or exposed to water splashes.
How to clean the detector?
Wipe the housing with a slightly damp soft cloth. Do not use chemical or abrasive products. Do not immerse the device in water.
What do the LEDs and bargraph mean?
The 10-segment bargraph indicates the intensity of the ultrasonic signal. The higher the number of lit segments, the stronger the leak. The LEDs (green, yellow, red) provide a quick visual indication (green = low, yellow = medium, red = high).
Is the device guaranteed?
Yes, the ULD-410-EUR is guaranteed for 2 years against manufacturing defects. For any claim, keep the proof of purchase and contact your dealer or Beha-Amprobe customer service.
User questions about ULD-410-EUR Beha-Amprobe
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Detector in PDF format for free! Find your manual ULD-410-EUR - Beha-Amprobe and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. ULD-410-EUR by Beha-Amprobe.
USER MANUAL ULD-410-EUR Beha-Amprobe
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Beha-Amprobe
Model : ULD-410-EUR
Category : Detector