EON Sub G2 - Pregnant JBL - Free user manual and instructions
Find the device manual for free EON Sub G2 JBL in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Powered Subwoofer |
| Brand | JBL |
| Model | EON Sub G2 |
| Dimensions (H x W x D) | 20.3 x 14.2 x 17.7 in (515 x 360 x 450 mm) |
| Weight | 40.6 lb (18.4 kg) |
| Power Output | 500 W continuous, 1000 W peak |
| Frequency Response | 37 Hz – 120 Hz |
| Maximum SPL | 129 dB peak |
| Low-Frequency Driver | 15 in (381 mm) neodymium magnet |
| Inputs | XLR (2), RCA (stereo) |
| Outputs | XLR (2) mix out, XLR (2) loop-through |
| Enclosure Type | Bass-reflex (ported) |
| Power Supply | 100-240 V AC, 50/60 Hz |
| Material | Polypropylene composite |
| Mounting Options | Pole mount (35 mm), floor |
| Protection Features | Overload, thermal, limiter |
| Maintenance | Wipe with dry cloth; no user-serviceable parts |
| Safety | Use grounded outlet; keep away from moisture |
| Spare Parts | Contact JBL support for drivers, amplifiers |
| General Information | Compatible with EON G2 series speakers; 2-year warranty |
Frequently Asked Questions - EON Sub G2 JBL
How do I connect the EON Sub G2 to my PA system?
Use XLR cables with balanced outputs from your mixer or tops. Connect to the Input jacks on the subwoofer for stereo signals or use a single input for mono. The Mix Out sends a summed signal to additional speakers.
Can I use the subwoofer without a satellite speaker?
Yes, it can operate alone. However, it is designed to be paired with full-range tops like the JBL EON G2 series for optimal performance and frequency range.
What is the recommended crossover frequency?
The EON Sub G2 has a built-in low-pass filter set at 120 Hz. For best results, set your satellite speakers to high-pass at 120 Hz via a crossover.
How can I reduce hum or noise?
Ensure all connections are properly grounded. Avoid running audio cables parallel to power cords. Use balanced XLR cables and keep the amplifier gain not too high.
What is the maximum power handling?
The amplifier provides 500 W continuous (1000 W peak). Do not exceed the input level to avoid clipping or damage.
Can I daisy-chain multiple subwoofers?
Yes, use the Loop-Through XLR outputs on the back panel. Ensure the total impedance load is within amp specifications.
How do I adjust the subwoofer volume?
Use the Volume knob on the rear panel. Start at minimum and gradually increase until the desired bass level is achieved without distortion.
What is the weight and can one person carry it?
It weighs approximately 40.6 lb (18.4 kg). It has side handles and is designed to be carried by one person, but caution is advised for large enclosures.
Is the subwoofer weather-resistant?
No, it is for indoor and covered outdoor use. Avoid exposure to rain, direct sunlight, or extreme temperatures.
Where can I find the user manual?
The manual is available for free download at notice-facile.com or JBL's official website. It includes detailed specs, connection diagrams, and troubleshooting.
User questions about EON Sub G2 JBL
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Pregnant in PDF format for free! Find your manual EON Sub G2 - JBL and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. EON Sub G2 by JBL.
USER MANUAL EON Sub G2 JBL
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : JBL
Model : EON Sub G2
Category : Pregnant