HWT8A2GT - Tumble drier Hanseatic - Free user manual and instructions
Find the device manual for free HWT8A2GT Hanseatic in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Tumble Dryer |
| Brand | Hanseatic |
| Model | HWT8A2GT |
| Color | White |
| Dimensions (H × W × D) | 85 cm × 60 cm × 58 cm |
| Weight | 45 kg |
| Capacity | 8 kg |
| Energy Class | B |
| Annual Energy Consumption | 500 kWh |
| Drying System | Condenser |
| Number of Programmes | 12 |
| Noise Level | 65 dB(A) |
| Delay Start | Yes, up to 24 hours |
| Anti-crease Function | Yes |
| Child Lock | Yes |
| Lint Filter | Yes, clean after each cycle |
| Condenser Cleaning | Periodically |
| Overheating Protection | Yes |
| Door Safety Lock | Yes |
| Spare Parts Availability | Through authorized service centers |
Frequently Asked Questions - HWT8A2GT Hanseatic
How do I install the Hanseatic HWT8A2GT tumble dryer?
Place the dryer on a level stable surface. Ensure proper ventilation around the appliance. Remove all packaging and transport locks. Connect the drain hose if using a condenser dryer (optional). Plug into a grounded outlet. Refer to the manual for detailed installation steps.
What is the maximum load capacity of the HWT8A2GT?
The maximum load capacity is 8 kg for cotton programs. For synthetics, reduce to 4 kg. Overloading may affect drying performance and cause damage.
How do I clean the lint filter?
Open the door and pull out the lint filter located at the bottom of the door opening. Remove lint by hand or with a soft brush. Rinse under running water if necessary. Dry completely before reinserting. Clean after every drying cycle.
Why is my dryer not heating properly?
Check if the lint filter is clogged. Ensure the condenser is clean. Verify that the room temperature is not too high. If the problem persists, the heating element or thermostat may be faulty. Contact a qualified technician.
Can I use the dryer without a drain hose?
Yes, the HWT8A2GT is a condenser dryer. It collects moisture in a water tank that you empty manually. Alternatively, you can connect a drain hose for continuous drainage.
What do the error codes mean on the display?
Common error codes include E1 (water tank full), E2 (lint filter blockage), and E3 (condenser issue). Refer to the manual's troubleshooting section for exact codes and solutions.
How often should I clean the condenser?
Clean the condenser every 30 drying cycles or when the 'Clean Condenser' indicator lights up. Remove the condenser from the bottom compartment and rinse with water. Dry thoroughly before reinserting.
Can I dry delicate fabrics like wool or silk?
The dryer has a special delicate program for low-temperature drying. For wool, use the wool care program if available. Always check the garment care label and use a drying rack for items that should not be tumble dried.
What is the energy consumption of the HWT8A2GT?
The energy consumption is approximately 500 kWh per year based on standard use. The dryer has energy class B. Using the eco program can reduce consumption.
How do I activate the child lock?
Press and hold the Child Lock button for 3 seconds until the lock symbol appears on the display. Deactivate by repeating the same action. The child lock prevents accidental button presses during operation.
User questions about HWT8A2GT Hanseatic
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Tumble drier in PDF format for free! Find your manual HWT8A2GT - Hanseatic and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. HWT8A2GT by Hanseatic.
USER MANUAL HWT8A2GT Hanseatic
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Hanseatic
Model : HWT8A2GT
Category : Tumble drier