CPE-120P - Receiver Omnitronic - Free user manual and instructions
Find the device manual for free CPE-120P Omnitronic in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Type de produit | Wireless Microphone Receiver |
| Brand | Omnitronic |
| Model | CPE-120P |
| Frequency Range | UHF 500-865 MHz |
| Number of Channels | 16 (preset) |
| Modulation | FM |
| Audio Output | XLR balanced, 1/4" unbalanced |
| Output Level | Mic/Line switchable |
| Power Supply | 12V DC, 500mA |
| Dimensions (rack mount) | 19" width, 1U height, 150mm depth |
| Weight | 2.5 kg |
| Antenna Connectors | BNC (2) |
| Squelch | Adjustable |
| Frequency Response | 50 Hz - 15 kHz |
| THD | <0.5% |
| Signal-to-Noise Ratio | >90 dB |
| Operating Range | Up to 100m (line of sight) |
| Housing | Metal |
| Display | LCD with frequency/channel |
| Controls | Up/Down, Set, Power |
| Included Accessories | Power adapter, antennas, rack ears |
| Safety Compliance | CE |
| Operating Temperature | 0°C to 40°C |
| Maintenance | Clean with dry cloth; avoid moisture |
| Spare Parts & Repairability | Contact Omnitronic service for parts |
Frequently Asked Questions - CPE-120P Omnitronic
How do I pair a microphone with the CPE-120P?
Ensure the receiver is powered on and the microphone has fresh batteries. Press the SET button on the receiver to enter channel selection. Use UP/DOWN to choose a channel that matches the microphone's frequency group. Then turn on the microphone; it should automatically sync. If not, manually set the microphone to the same frequency.
What is the maximum operating range?
The typical operating range is up to 100 meters (330 feet) in open line-of-sight conditions. Walls and obstacles may reduce this range.
How do I change the frequency on the receiver?
Press the SET button to enter frequency mode. Use UP/DOWN to scroll through available frequencies or channels. Press SET again to confirm. The display will show the new frequency.
What causes interference and how can I avoid it?
Interference can come from other wireless devices, metal structures, or crowded RF environments. To avoid interference, select a clear frequency using the scan function (if available) or manually choose a channel with minimal noise. Keep antennas away from metal surfaces.
How do I connect the receiver to a mixer or amplifier?
Use an XLR cable for balanced audio output to a mixer's microphone input, or a 1/4" TS/TRS cable for unbalanced connection. Set the output level switch to MIC for microphone level or LINE for line level, matching your mixer's input requirements.
Can I mount the receiver in a rack?
Yes, the CPE-120P is designed for 19-inch rack mounting (1U height). Use the included rack ears and screws to secure it in a standard equipment rack.
What is the warranty period?
Omnitronic typically offers a 2-year warranty from the date of purchase. For specific terms, refer to the warranty card or contact the dealer.
No sound from the receiver. What should I check?
First, ensure the receiver is powered (LED lit). Check that the microphone is on and has fresh batteries. Verify the audio cables are properly connected. Adjust the squelch control to a lower setting if it is too high. Also confirm the output level switch matches your mixer input.
Can I use multiple CPE-120P receivers together?
Yes, you can use multiple receivers simultaneously. Assign each receiver a different frequency group or channel to avoid interference. Keep antennas at least 1 meter apart for optimal performance.
How do I clean and maintain the receiver?
Use a soft, dry cloth to wipe the exterior. Do not use liquids or sprays. Ensure the device is unplugged before cleaning. Keep the ventilation slots clear of dust. For internal issues, contact Omnitronic service.
User questions about CPE-120P Omnitronic
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Receiver in PDF format for free! Find your manual CPE-120P - Omnitronic and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. CPE-120P by Omnitronic.