MP-500P - Receiver Omnitronic - Free user manual and instructions
Find the device manual for free MP-500P Omnitronic in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Receiver |
| Brand | Omnitronic |
| Model | MP-500P |
| Dimensions (W x H x D) | 482 x 88 x 250 mm (19", 2U) |
| Weight | 5 kg |
| Power Supply | 230 V AC, 50 Hz, 100 VA |
| Output Power | 2 x 100 W RMS at 8 ohms |
| Inputs | 2 x XLR/Jack combo, 2 x RCA, Bluetooth |
| Outputs | 2 x Speakon, 1 x RCA record out |
| Media Playback | MP3 player, USB, SD card, FM tuner |
| Bluetooth Version | 4.0 with A2DP |
| Frequency Response | 20 Hz - 20 kHz |
| Signal-to-Noise Ratio | > 90 dB |
| Protection Features | Short circuit, overheating, overload |
| Cooling | Fan cooled |
| Operating Temperature | 0°C to 40°C |
| Housing | Metal, rackmount ears included |
| Accessories Included | Power cord, remote control, antenna |
| Maintenance | Clean with dry cloth; avoid moisture |
| Spare Parts Availability | Contact Omnitronic support |
| Reparability | Serviceable by qualified technician |
Frequently Asked Questions - MP-500P Omnitronic
How do I connect speakers to the MP-500P?
Use Speakon connectors: connect your speaker cables to the SPEAKON OUTPUT jacks (left and right) on the rear panel. Ensure impedance is at least 8 ohms per channel.
Can I play audio via Bluetooth?
Yes, the MP-500P has built-in Bluetooth. Press the BT button on the front panel and pair your device. The device name will appear as 'MP-500P'.
What is the maximum power output?
The receiver delivers 2 x 100 W RMS at 8 ohms per channel. At 4 ohms, it can deliver up to 2 x 150 W RMS, but ensure adequate cooling.
How do I use the FM tuner?
Connect the included wire antenna to the FM ANT terminal. Press FM on the front panel and use the tuning knob to search for stations. You can store presets.
What media formats are supported via USB/SD?
The MP-500P supports MP3 files only. Insert a USB drive or SD card into the respective slots and press USB or SD to switch playback.
What should I do if the device overheats?
Ensure proper ventilation: keep at least 10 cm clearance around the fan vents. If overheating persists, reduce volume or check for blocked airflow.
Can I connect a subwoofer?
Yes, use the REC OUT RCA output to connect an active subwoofer. Note that this output sends a full-range signal; adjustment may be needed on the subwoofer.
How do I reset the receiver to factory settings?
Press and hold the POWER button for 5 seconds until the display shows 'RESET'. Release to confirm. All settings will be cleared.
Is the MP-500P compatible with 110V?
No, it is designed for 230 V AC, 50 Hz only. Using it with a different voltage may damage the unit. Use a step-down transformer if necessary.
Where can I find the user manual?
The manual is available for free download on notice-facile.com. You can also request a translated version via the website.
User questions about MP-500P Omnitronic
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Receiver in PDF format for free! Find your manual MP-500P - Omnitronic and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. MP-500P by Omnitronic.
USER MANUAL MP-500P Omnitronic
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Omnitronic
Model : MP-500P
Category : Receiver