CPZ-60P - Receiver Omnitronic - Free user manual and instructions
Find the device manual for free CPZ-60P Omnitronic in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Receiver / Amplifier |
| Brand | Omnitronic |
| Model | CPZ-60P |
| Dimensions (W x H x D) | 482 x 88 x 210 mm (19" rack mount, 2U) |
| Weight | 4.5 kg |
| Power Supply | 100-240 V AC, 50/60 Hz (internal switching) |
| Power Consumption | 120 W max |
| Output Power (per channel) | 2 x 60 W RMS into 4 ohms |
| Frequency Response | 20 Hz - 20 kHz (±1 dB) |
| Total Harmonic Distortion | < 0.05% @ 1 kHz, rated power |
| Input Sensitivity | 775 mV (RCA), 1.2 V (XLR) |
| Input Impedance | 47 kΩ |
| Signal-to-Noise Ratio | > 90 dB |
| Audio Inputs | 2 x RCA, 1 x XLR (balanced) |
| Audio Outputs | 2 x speakON NL4, 1 x line out RCA |
| Controls | Volume, input selector, bass, treble, power switch |
| Protection | Short circuit, thermal, overcurrent, DC offset |
| Cooling | Temperature-controlled fan |
| Operating Temperature | 0°C to 40°C |
| Cleaning | Use a dry, soft cloth. Avoid solvents and liquids. |
| Safety | Do not expose to rain or moisture. Disconnect power before servicing. |
| Spare Parts / Reparability | Contact Omnitronic service center. Only use original parts. |
| Included Accessories | Power cord, rack mount ears, user manual |
| Certification | CE, RoHS |
Frequently Asked Questions - CPZ-60P Omnitronic
How do I connect speakers to the CPZ-60P?
Use speakON NL4 connectors (not included with speakers). Ensure polarity matches (+ to +, - to -). Minimum impedance 4 ohms per channel.
What is the power output of this receiver?
The CPZ-60P delivers 2 x 60W RMS into 4 ohms, suitable for small to medium PA setups.
Can I bridge the amplifier for more power?
No, the CPZ-60P is not bridgeable. It operates in stereo mode only.
What input sources can I use?
You can connect devices via RCA (unbalanced) or XLR (balanced) inputs, such as mixers, CD players, or wireless receivers.
How do I clean the device?
Disconnect power. Use a dry, lint-free cloth. Do not use liquids or abrasive cleaners. Keep ventilation slots clear.
Why does the amplifier shut down during use?
This may be due to thermal protection. Ensure proper ventilation and that impedance is not too low. Reduce volume if overheating occurs.
What are the dimensions for rack mounting?
The CPZ-60P is 19 inches (482 mm) wide and 2U (88 mm) high. Use included rack ears for mounting.
Is a subwoofer output available?
There is no dedicated subwoofer output. Use the line out to connect an active subwoofer, or connect a passive sub via one channel in parallel (ensure impedance).
What type of power cable does it use?
Standard IEC C14 connector. A power cord is included. Use only grounded outlets.
Where can I find the user manual?
The manual is available for free download on notice-facile.com in PDF format. You can also request a translated version by email.
User questions about CPZ-60P Omnitronic
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Receiver in PDF format for free! Find your manual CPZ-60P - Omnitronic and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. CPZ-60P by Omnitronic.
USER MANUAL CPZ-60P Omnitronic
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Omnitronic
Model : CPZ-60P
Category : Receiver