RA-E611B-DAB - Radio JVC - Free user manual and instructions
Find the device manual for free RA-E611B-DAB JVC in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | DAB+/FM Radio |
| Brand | JVC |
| Model | RA-E611B-DAB |
| Dimensions (approx) | 200 x 120 x 80 mm |
| Weight (approx) | 0.5 kg |
| Power Supply | AC 230V ~ 50Hz or 4 x AA batteries (not included) |
| Radio Bands | DAB/DAB+, FM (87.5-108 MHz) |
| Display | LCD with backlight |
| Features | Alarm clock, Sleep timer, Preset stations (up to 20), Headphone jack, Line out |
| Care | Clean with soft dry cloth; avoid liquid cleaners |
| Safety | Do not expose to rain or moisture; unplug during storms |
| Spare Parts | Available through JVC service centers; contact support |
| General Information | User manual available online; ensure proper ventilation |
Frequently Asked Questions - RA-E611B-DAB JVC
How do I set the alarm?
Press and hold the Alarm button until the clock flashes. Use the tuning knob to set the hour and minute, then press Alarm again to confirm. Ensure the radio is set to DAB or FM for the alarm sound.
How can I store radio presets?
Tune to your desired station, then press and hold one of the preset buttons (1-5 or 6-20 depending on model) until you hear a beep. Repeat for other stations.
Why is there no DAB reception?
Check the antenna is fully extended. Try repositioning the radio near a window or away from metal objects. Perform an auto-tune via the menu to rescan available channels.
How do I switch between DAB and FM?
Press the Mode button repeatedly to toggle between DAB and FM. The current band is shown on the display.
How do I adjust the clock manually?
If the clock is not auto-syncing from DAB, go to Menu > Clock > Set Clock. Use the tuning knob to adjust hour and minute, then confirm.
Can I use batteries instead of AC power?
Yes, insert 4 x AA batteries (not included) in the battery compartment at the back. The radio will automatically switch to battery power when unplugged.
Is there a sleep timer?
Yes, press the Sleep button repeatedly to set the timer (e.g., 15, 30, 60 minutes). The radio will turn off automatically after the selected time.
How do I factory reset the radio?
Turn off the radio, then press and hold the Menu button while turning it on. Follow on-screen prompts to reset. This erases all presets and settings.
What is the headphone output impedance?
The headphone jack supports standard 3.5 mm plugs with an impedance of 32 ohms or higher. Do not use low-impedance earphones to avoid distortion.
How should I clean my radio?
Use a soft, dry cloth to wipe the exterior. Do not use water, alcohol, or abrasive cleaners. Ensure no moisture enters the vents.
User questions about RA-E611B-DAB JVC
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Radio in PDF format for free! Find your manual RA-E611B-DAB - JVC and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. RA-E611B-DAB by JVC.