RSGE-24 - Switch Lanberg - Free user manual and instructions
Find the device manual for free RSGE-24 Lanberg in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Switch |
| Brand | Lanberg |
| Model | RSGE-24 |
| Number of Ports | 24 |
| Port Type | RJ45 10/100/1000 Mbps (Gigabit Ethernet) |
| Switching Capacity | 48 Gbps |
| MAC Address Table | 8K entries |
| Power Supply | External power adapter, DC 12V, 1A |
| Power Consumption | ≤ 12W |
| Dimensions (W x D x H) | 17.5 x 10 x 4.5 cm |
| Weight | 1.5 kg |
| Casing | Metal |
| Cooling | Fanless |
| LED Indicators | Power, Link/Act per port |
| Mounting | Desktop or wall mountable |
| Operating Temperature | 0°C to 40°C |
| Storage Temperature | -10°C to 70°C |
| Humidity | 10% to 90% non-condensing |
| Standards | IEEE 802.3, 802.3u, 802.3ab |
| Safety | CE, RoHS |
| Cleaning | Use a dry cloth; avoid liquids |
| Maintenance | None required (plug and play) |
| Spare Parts | Power adapter available separately |
| General Information | Unmanaged switch, no configuration needed |
Frequently Asked Questions - RSGE-24 Lanberg
How do I connect the switch to my network?
Connect the power adapter to the switch and plug it into a power outlet. Then, use Ethernet cables to connect your devices (computers, routers, etc.) to any of the 24 ports. The switch will automatically negotiate the speed and duplex mode.
Does this switch require any configuration?
No, the Lanberg RSGE-24 is an unmanaged switch. It works out of the box with no configuration required. Simply connect and use.
What do the LED indicators mean?
The power LED lights up when the switch is powered on. Each port has a Link/Act LED: solid green indicates a valid connection, blinking indicates activity (data transfer).
Can I mount this switch on a wall?
Yes, the RSGE-24 comes with mounting holes on the bottom for wall mounting. Use appropriate screws and anchors (not included) to secure it.
What is the maximum cable length supported?
The switch supports standard Ethernet cable lengths up to 100 meters (328 feet) for each port.
Is the switch compatible with PoE (Power over Ethernet)?
No, the RSGE-24 does not support PoE. It only passes data; connected devices must have their own power source.
What should I do if a port is not working?
Check the Ethernet cable and try a different port. Ensure the connected device is powered on. If the issue persists, restart the switch by unplugging the power adapter for 10 seconds and plugging it back in.
Can I use this switch with a router?
Yes, connect one of the switch ports to a LAN port on your router using an Ethernet cable. The switch will extend your network.
Does this switch support jumbo frames?
Yes, the RSGE-24 supports jumbo frames up to 9K bytes for improved performance in large data transfers.
How do I clean the switch?
Disconnect power before cleaning. Use a soft, dry cloth to wipe the exterior. Do not use any liquids or sprays.
User questions about RSGE-24 Lanberg
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Switch in PDF format for free! Find your manual RSGE-24 - Lanberg and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. RSGE-24 by Lanberg.
USER MANUAL RSGE-24 Lanberg
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Lanberg
Model : RSGE-24
Category : Switch