POWERSET35 - Uncategorized KKT Kolbe - Free user manual and instructions
Find the device manual for free POWERSET35 KKT Kolbe in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Power Tool (Corded/Cordless) |
| Model | POWERSET35 |
| Brand | KKT Kolbe |
| Power Source | 230V AC, 50Hz |
| Power Consumption | 350 W |
| No-Load Speed | 0-3000 rpm |
| Chuck Type | Keyless, 1-10 mm |
| Max Drilling Capacity (Steel) | 10 mm |
| Max Drilling Capacity (Wood) | 25 mm |
| Weight | 1.4 kg |
| Dimensions (L x W x H) | 250 x 180 x 70 mm |
| Cable Length | 2.5 m |
| Protection Class | II (Double insulated) |
| Main Functions | Drilling, Screwdriving, Impact drilling |
| Variable Speed Trigger | Yes |
| Forward/Reverse Switch | Yes |
| Maintenance | Clean ventilation slots regularly; replace carbon brushes when worn |
| Safety Features | Lock-on button, safety clutch |
| Accessories Included | Drill bits (set), screwdriver bits, depth stop |
| Spare Parts Availability | Carbon brushes, chuck, switch available via service centers |
| Repairability Index | 7/10 (user-replaceable brushes) |
| Warranty | 2 years |
| Standards Compliance | CE, RoHS |
Frequently Asked Questions - POWERSET35 KKT Kolbe
How do I change the drill bit?
Turn the chuck counterclockwise to loosen, insert the bit, then tighten clockwise by hand. For keyless chucks, firm hand tightening is sufficient.
What is the maximum drilling depth in wood?
The maximum drilling capacity in wood is 25 mm. Use a sharp wood drill bit for best results.
Can I use this drill for masonry?
Yes, the POWERSET35 has an impact drilling mode. Use masonry bits and select the hammer symbol on the mode selector.
How do I switch between forward and reverse?
Locate the forward/reverse switch near the trigger. Push it to the left for forward (drilling), right for reverse (unscrewing). Never change direction while the motor is running.
Why does the drill stop suddenly?
It may be due to overload or the safety clutch engaging. Reduce pressure or check if the bit is jammed. If the motor overheats, let it cool down before resuming.
How do I clean the drill?
Unplug the drill. Use a dry cloth to wipe the exterior. Clean ventilation slots with a soft brush. Do not use water or solvents.
Are replacement carbon brushes available?
Yes, carbon brushes are replaceable. Purchase genuine KKT Kolbe brushes. Unscrew the brush caps, remove old brushes, and insert new ones. Ensure they seat properly.
What should I do if the chuck wobbles?
Check if the chuck is properly tightened. If wobbling persists, the chuck may be damaged. Replace the chuck using a hex key to remove the retaining screw.
Can I use this drill with a extension cord?
Yes, use a heavy-duty extension cord (min 1.5 mm² cross-section) rated for the power consumption. Keep the cord length under 30 meters to avoid voltage drop.
Does the drill have a lock-on button for continuous use?
Yes, press the lock-on button located above the trigger to keep the drill running without holding the trigger. Press the trigger again to release.
User questions about POWERSET35 KKT Kolbe
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual POWERSET35 - KKT Kolbe and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. POWERSET35 by KKT Kolbe.