DF415HSS - Dishwasher LG - Free user manual and instructions

Product Type	Built-in Dishwasher
Brand	LG
Model	DF415HSS
Height	34.5 inches (87.6 cm)
Width	23.9 inches (60.7 cm)
Depth	27.9 inches (70.9 cm)
Weight	Approx. 110 lbs (50 kg)
Power Supply	120V, 60Hz, 15A dedicated circuit
Energy Consumption	270 kWh per year (estimated)
Water Consumption	3.2 gallons per cycle (typical)
Number of Place Settings	16
Noise Level	44 dBA
Wash Cycles	Normal, Heavy, Light, Rinse Only, Eco, Turbo, Delicate
Additional Functions	Half Load, Delay Start, Child Lock, Self-Clean, Steam
Cleaning & Maintenance	Clean filter monthly, wipe door seals, use dishwasher cleaner
Safety Features	Child lock, overflow protection, leak sensor
Spare Parts Availability	Filters, racks, spray arms, door seals, heating element
Repair Information	Refer to manual for error codes and troubleshooting
Installation Type	Built-in under counter
Control Panel	Electronic touch controls with digital display
Tub Material	Stainless steel

Frequently Asked Questions - DF415HSS LG

How do I reset the LG DF415HSS dishwasher?

Press and hold the Start button for 3 seconds to cancel a cycle, then press Power to reset. For a hard reset, unplug the unit for 1 minute.

What is the recommended detergent for this dishwasher?

Use a high-quality automatic dishwasher detergent (powder, gel, or tablet). Avoid using hand dish soap as it causes oversudsing.

How do I clean the filter on the DF415HSS?

Remove the lower rack, twist and lift the filter assembly. Rinse under running water and scrub with a soft brush. Reinstall by twisting clockwise until it locks.

Why is my LG dishwasher not drying dishes?

Ensure Heat Dry option is selected. Check rinse aid level and refill if low. Also, use a rinse aid to improve drying. If problem persists, the heating element may need inspection.

Can I run the dishwasher with half a load?

Yes, use the Half Load function (if available) to reduce water and energy consumption. Load dishes only in the selected rack.

What does the 'Normal' cycle do?

The Normal cycle is for everyday soiled dishes. It uses high-pressure water and heat to clean and dry. Typical duration is about 2-3 hours.

How do I enable Child Lock?

Press and hold the Child Lock button for 3 seconds. A lock icon will appear on the display. Repeat to disable.

What is the best cycle for heavily soiled pots?

Use the Heavy cycle. It uses higher water temperature and longer wash time to remove baked-on food. Ensure pots are placed correctly.

How do I install the dishwasher?

The DF415HSS is a built-in model. Follow the installation manual: connect water supply (hot water), drain hose, and electrical (120V). Level the unit and secure under counter.

Where can I download the user manual for DF415HSS?

Visit the LG support website or our page notice-facile.com to download the free PDF manual. Enter your model number to find it.

USER MANUAL DF415HSS LG

Before beginning installation, read these instructions carefully. This will simplify installation and ensure that the product is installed correctly and safely. Leave these instructions near the product after installation for future reference.

EN ENGLISH

BG BULGARIAN

CS CZECH

HR CROATIAN

HU HUNGARIAN

MK MACEDONIAN

PL POLISH

RO ROMANIAN

SK SLOVAK

SL SLOVENIAN

SQ ALBANIAN

SR SERBIAN

DF415*** DF215**

MFL70282444

This manual may contain images or content different from the model you purchased.

This manual is subject to revision by the manufacturer.

SAFETY INSTRUCTIONS ....3

IMPORTANT SAFETY INSTRUCTIONS ....3

CARING FOR THE ENVIRONMENT....10

INSTALLATION....11

Specifications....11

Accessories (On Some Models)....12

Preparing Cabinet Opening....12

Installing Moisture Barrier Tape (On Some Models) 15

Levelling the Appliance 15

Installing the Drain Hose....16

Connecting the Water Supply Hose 17

Preparing Electrical Wiring....18

Final Check 18

OPERATION 19

Before Using the Appliance....19

Using the Appliance 23

Control Panel 24

Cycles 26

Cycle Options....27

Auto Open Dry (On Some Models) 28

SignaLight™ (On Some Models) 28

Programme Guide (model dependent)....29

Available Options 31

Information for Energy Test (EN50242)....32

Loading the Dishwasher....33

Adding Cleaning Agents 38

Refilling 40

Drying....40

Unloading the Dishwasher 40

SMART FUNCTIONS....41

Using LG SmartThinQ Application 41

Using Smart Diagnosis....43

MAINTENANCE 45

Cleaning the Exterior....45

Cleaning the Interior....45

Cleaning the Filters 46

Cleaning the Spray Arms 47

Cleaning the Water Supply Hose Filter 49

TROUBLESHOOTING 50

Diagnosing Problems....50

Error Codes....55

OPERATING DATA....56

The following safety guidelines are intended to prevent unforeseen risks or damage from unsafe or incorrect operation of the appliance.

The guidelines are separated into ‘WARNING’ and ‘CAUTION’ as described below.

This symbol is displayed to indicate matters and operations that can cause risk. Read the part with this symbol carefully and follow the instructions in order to avoid risk.

WARNING

This indicates that the failure to follow the instructions can cause serious injury or death.

CAUTION

This indicates that the failure to follow the instructions can cause the minor injury or damage to the product.

IMPORTANT SAFETY INSTRUCTIONS

WARNING

To reduce the risk of explosion, fire, death, electric shock, injury or scalding to persons when using this product, follow basic precautions, including the following:

Children in the Household

This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance.

Installation

- Never attempt to operate the appliance if it is damaged, malfunctioning, partially disassembled, or has missing or broken parts, including a damaged cord or plug.

- If the power cord is damaged or the hole of the socket outlet is loose, do not use the power cord and contact an authorized service centre.

- Do not modify the power cord provided with the appliance. Please contact the LG Customer Information Centre to advise of its incompatibility.

- This appliance should only be transported by two or more people holding the appliance securely.

- Do not install the appliance in a damp and dusty place. Do not install or store the appliance in any outdoor area, or any area that is subject to weathering conditions such as direct sunlight, wind, or rain or temperatures below freezing.

- Do not plug multiple socket outlets, an extension power cable or adapter with this appliance.

- Disconnect the power cord, house fuse or circuit breaker before installing or servicing the appliance.

- When moving or installing the product in a different location, call qualified service personnel for installation and service.

- Fix the drain hose securely in place.

- This appliance is not designed for maritime use or for mobile installations such as in RVs, trailers, or aircraft.

- This appliance must be positioned near to an electrical power supply.

- When installing or moving the appliance, be careful not to pinch, crush, or damage the power cord.

- Use new hose or hose-set supplied with the appliance. Reusing old hoses can cause a water leak and subsequent property damage.

- Improper connection of the equipment-grounding conductor can result in risk of electric shock. Check with a qualified electrician or service personnel if you are in doubt as to whether the appliance is properly grounded.

- This appliance must be grounded. In the event of malfunction or breakdown, grounding will reduce the risk of electric shock by providing a path of least resistance for electric current.

- This appliance is equipped with a power cord having an equipment-grounding conductor and a grounding power plug. The power plug must be plugged into an appropriate socket outlet that is installed and grounded in accordance with all local codes and ordinances.

- After installing, check the hose connection for leaks before moving the appliance into the cabinet opening.

- Do not damage or place heavy items on the power cord of the appliance.

- This appliance is intended to be used in household and domestic applications only and must not be used for commercial purposes.

- For a permanently connected dishwasher: This appliance must be connected to a grounded metal, permanent wiring system, or an equipment-grounding conductor must be run with the circuit conductors and connected to the equipment-grounding terminal or lead to the appliance.

- Connect the ground wire to the green ground connector in the terminal box.

Operation

- Immediately unplug the power plug and contact an LG Electronics customer information centre if you detect a strange sound, odour, or smoke coming from the appliance.

- Do not repair or replace any part of the appliance. All repairs and servicing must be performed by qualified service personnel unless specifically recommended in this Owner's Manual. Use only authorized factory parts.

- Do not leave the appliance door open. Children may hang on the door or crawl inside the appliance, causing damage or injury.

- Do not use flammable gas and combustible substances (benzene, gasoline, thinner, petroleum, alcohol, etc.) near the appliance.

- Do not attempt to separate any panels or disassemble the appliance. Do not apply any sharp objects to the control panel in order to operate the appliance.

- Do not bend the power cable excessively or place a heavy object on it.

- Do not put animals, such as pets into the appliance.

- Do not touch the power plug or the appliance controls with wet hands.

- If there is a gas leakage (isobutane, propane, natural gas, etc.), do not touch the appliance or power plug and ventilate the area immediately.

- In case of flood, disconnect the power plug and contact the LG Electronics Customer Information Centre.

- Under certain conditions, hydrogen gas may be produced in a hot-water system that has not been used for two weeks or more. HYDROGEN GAS IS EXPLOSIVE. If the hot-water system has not been used for such a period, before using the appliance turn on all hot water taps and let the water flow from each for several minutes. This will release any accumulated hydrogen gas. As the gas is flammable, do not smoke or use an open flame during this time.

- Keep the area underneath and around your appliances free of combustible materials such as lint, paper, rags, chemicals, etc.

- Some dishwasher detergents are strongly alkaline. They can be extremely dangerous if swallowed. Avoid contact with the skin and eyes and keep children away from the dishwasher when the door is open. Check that the detergent receptacle is empty after completion of the wash cycle.

- Do not operate the appliance unless all enclosure panels are properly in place.

- Use only detergents or wetting agents recommended for use in an appliance and keep them out of the reach of children.

- Do not wash and dry articles that have been soaked in explosive substances such as gasoline, solvents, solvent-based detergent.

- When loading items to be washed:

- Locate sharp items so that they are not likely to damage the door seal.

- Load sharp knives with the handles up to reduce the risk of cut-type injuries.

- Do not wash plastic items unless they are marked “dishwasher safe” or the equivalent. For plastic items not so marked, check the manufacturer’s recommendations.

- Do not touch any heating element (where it is exposed) during or immediately after use.

- Do not abuse, sit on, or stand on the door or dish rack of the dishwasher.

- After cleaning the dishes, turn off the tap. Turn on the tap again and check the connection status of water supply hose before cleaning.

- Do not open the door while the appliance is in operation. Water will splash out and could cause a slipping hazard.

- Be careful not to catch your hand when closing the door of the appliance.

- Do not wash or dry articles that have been soaked in explosive substances such as gasoline, solvents, or solvent-based detergents.

- Do not come into contact with any fitted steam outlet.

- Small parts, such as rack clips and filter retaining posts, can be a choke hazard to small children if removed from the dishwasher. Keep out of reach of small children.

- Knives and other utensils with sharp points must be loaded in the basket with their points down or placed in a horizontal position.

- The door should not be left in the open position since this could present a tripping hazard.

Maintenance

- Never unplug the appliance by pulling on the power cable. Always grip the power plug firmly and pull straight out from the socket outlet.

- Securely plug the power plug into the socket outlet after completely removing any moisture and dust.

- Do not spray water inside or outside the appliance to clean it.

- Disconnect the appliance from the power supply before cleaning the appliance. Setting the controls to the OFF or standby position does not disconnect this appliance from the power supply.

Disposal

- Before discarding an old appliance, unplug it. Cut off the cable directly behind the appliance to prevent misuse.

- Dispose of all packaging materials (such as plastic bags and styrofoam) away from children. The packaging materials can cause suffocation.

- Remove the door before disposing of or discarding this appliance to avoid the danger of children or small animals getting trapped inside.

CAUTION

To reduce the risk of fire, electric shock, or injury to persons when using your product, basic safety precautions should be followed, including the following:

Installation

• Install the product on a firm and level floor. - Do not put the drain hose under the dishwasher during installation.

Operation

- Turn off the water tap and unplug the appliance if the appliance is to be left for an extended period of time, such as during vacations.

- Do not place objects on the top of the appliance.

- Do not wipe or coat the surface of the product with liquid detergent or bleach (chlorine bleach, oxygen bleach, etc). Failure to follow these instructions may result in corrosion or discoloration of the coating.

- Do not touch water draining from the machine as it may be hot.

- If the drain hose and the water supply hose are frozen in winter, defrost before using.

- Do not put hands, feet, or metal objects below or behind the appliance.

- Do not wash dishes stained with chemical products such as oil, cream or lotions used in a massage parlor, skin care shop, beauty shop or barber shop.

MAINTENANCE

- If cooking oil is spilled on the exterior of the product, wipe it off immediately. Do not clean the exterior of the product with cleaners which contain alcohol, thinners, bleach, benzene, flammable liquids, or abrasives. These substances may discolor or damage the appliance.

CARING FOR THE ENVIRONMENT

Disposal of Your Old Appliance

• This crossed-out wheeled bin symbol indicates that waste electrical and electronic products (WEEE) should be disposed of separately from the municipal waste stream.
• Old electrical products can contain hazardous substances, so correct disposal of your old appliance will help prevent potential negative consequences for the environment and human health. Your old appliance may contain reusable parts that could be used to repair other products, and other valuable materials that can be recycled to conserve limited resources.
• You can take your appliance either to the shop where you purchased the product, or contact your local government waste office for details of your nearest authorised WEEE collection point. For the most up-to-date information for your country, please see www.lg.com/global/recycling.

Specifications

1 Control Panel & Door Handle 2 Front Cover 3 Lower Cover 4 Leveling Feet 5 Drain Hose 6 Water Supply Hose 7 Power Cord

1 Top Wash Impeller 2 Upper Spray Arm 3 Lower Spray Arm 4 Salt Container Cap 5 Filtration System 6 Cutlery Basket (On Some Models) 7 Detergent and Rinse Aid Dispenser 8 Cutlery Rack (On Some Models) 9 Upper Rack 10 Lower Rack 11 Steam Nozzle (Steam Models)

• Power supply: 220-240 V~, 50 Hz • Dimension (Width X Depth X Height): 600 mm X 600 mm X 850 mm • Product weight: DF215** - 49 kg, DF415*** - 52 kg • Max. capacity: DF215** / DF415*** - 14 place settings • Water feed pressure: 0.05 – 0.6 MPa • Power consumption: 1600 – 1800 W

Appearance and specifications may vary without notice to improve the quality of the appliance.

Accessories (On Some Models)

Funnel (All models)

Noise Strip (Lower - 1EA / Front - 1EA / Side - 2EA)

Cover Felt

Moisture Barrier Tape (Aluminum Tape)

Preparing Cabinet Opening

stable area

• Cut out for hoses and electrical cables on either side. (Approximately 100 mm X 75 mm)
• Select a location as close to the sink as possible for ease of connection to the water and drain pipes.
• To ensure drainage, the appliance should not be installed more than 1 meter away from the sink.
• If the appliance is installed in a corner, allow minimum clearance of at least 50 mm between the appliance and an adjacent cabinet or wall.
• Before sliding the appliance into the installation opening, all necessary height adjustments should be made using a spanner.

CAUTION

• Any bare wood surrounding the appliance should be sealed with a waterproof paint or sealant to prevent it from swelling.
• Slide the dishwasher into the cabinet, opening carefully. Make sure that the drain hose behind the machine and inside the cabinet is not kinked or stretched. • Install the appliance on a flat and stable area. Do not place any objects in-between the floor and base or leg of the appliance.

NOTE

• This installation must be conducted by qualified service personnel to ensure it has been installed correctly.
• Do not pull or lift the appliance using the handle; doing so can damage the door and hinges. Open the door and grab the body frame and the top front opening of the tub to move or lift the appliance.

- Do not push the door of the dishwasher with knees.

Attaching the Strip to the Appliance Base

To reduce noise attach the strip to the appliance base.

1 Lay down the appliance and pull on both the hooks at the bottom of the lower cover.

2 Pull on the lower cover to remove it.

3 Remove the double-sided tape on the back of the felt and attach it to the front side of the appliance's bottom.

4 Remove the double-sided tape from the lower and front strips.

5 Attach the black coloured lower strip to the bottom of the lower cover.

6 Attach the white coloured front strip to the top of the lower cover.

- The length of the front strip is longer than the lower cover. Attach the front strip so that the overhang is equal on both sides of the lower cover.

7 Attach the lower cover with the strip onto the appliance.

Attaching the Strip to the Appliance side cabinet

To reduce noise attach the strip to the appliance sides, if the opening space allows.

1 Remove the double-side tape from the side strips.

2 Attach the side strip to the front of the side cabinet and then push down the side strip so that the side strip adheres well to the cabinet.

3 Repeat the above steps for attaching the opposite side strip to the opposite side cabinet.

Removing the Top Cover

If the height of the opening is below 850 mm, follow these instructions.

1 Remove the 2 screws on the back.

2 Pull the top cover backwards after removing the two screws and then lift it up to remove it.

3 Remove the locating pins on the top by using a Phillips screw driver.

NOTE

- When the appliance is correctly leveled, there should be no slant, stickiness or rubbing sound when the door is opened.

Installing Moisture Barrier Tape (On Some Models)

When the appliance is installed without the top cover, the counter top underside may be damaged by steam or condensation when the door is opened.

Install the moisture barrier tape to the underside of counter top to protect the counter top from condensation when the appliance opened.

1 Clean and dry the underside of the counter top on which the tape will be attached.

2 Remove the protective film from the tape.

3 Install the tape to the underside of the counter top.

NOTE

• Moisture barrier tape is included in the manual assembly bag.
• If the counter top is made of granite or waterproof materials, the moisture barrier tape is not required.
• Condensation may occur on the underside or along the front edge of the counter top when the room temperature is low.

Levelling the Appliance

Levelling the appliance prevents unnecessary leakage and poor washing. Place the appliance on a solid, level floor. Do not install the appliance on an elevated surface.

If the appliance is not properly level, adjust all levelling feet as necessary.

Turn them clockwise to raise and counter-clockwise to lower until the appliance no longer wobbles, both front-to-back and side-to-side and corner-to-corner.

NOTE

- The appliance is not level if there is a rubbing sound or stickiness when the door is opened.

Case 1. The Door is Slanted to the Right

1 Unscrew (counter-clockwise) the rear left leg and correct the level.

2 Check the opening of door and repeat if necessary until the door opens and closes properly.

Case 2. The Door is Slanted to the Left

1 Unscrew (counter-clockwise) the rear right leg and correct the level.

2 Check the opening of door and repeat if necessary until the door opens and closes properly.

Installing the Drain Hose

If the end of the drain hose does not fit to the drain line, use a drain extension kit (optional) that is resistant to heat and detergent.

This should be available from a plumbing shop or a hardware store.

Connection to the Waste Spigot

Check the waste spigot when initially installing. An OE error can occur when the waste spigot below the sink is not drilled out properly. To connect the drain hose, drill out at least a 15 mm diameter hole in the waste spigot before connecting and securing.

CAUTION

• Make sure that plastic debris is not remaining inside of spigot after it has been drilled out. - Do not attempt to open the waste hole with a screwdriver and hammer. this will induce debris to become stuck and cause a malfunction. - Caution should be taken when passing hoses through Cabinetry holes as they may have sharp edges and could damage the hoses.

Smooth or sand edges to avoid damaging the drain or inlet hose.

• Make sure that the line is not kinked or sharply bent. - Make sure the drain hose is straight before feeding the end of it through the hole for the water supply.

To prevent siphoning, one of the following methods must be used.

Method 1

When the drain hose is connected to a waste spigot, the hose must be looped up to the underside of the bench top and secured.

Bench top

Method 2

When the drain hose is connected to a separate standpipe, it is essential that an airtight connection be made. If not, it can induce odors.

Connecting the Water Supply Hose

Connect the water supply hose to the water tap.

WARNING

• Do not shorten or damage the water supply hose as it contains electrical wires and components. It can not be detached or removed from the appliance for installation purposes.
• It is important that the water supply hose not be tampered with, cut, disassembled, pulled, or kinked. It contains electrical wiring inside and if damaged, can cause an electrical hazard.

CAUTION

- Only use the threaded nut of the water supply hose to tighten it to the tap. - Do not twist or kink the water supply hose when connecting it to the tap.

CAUTION

• This appliance may be fed with either hot or cold water. If the water connection can not be maintained below 65 °C, the appliance must be connected to cold water.
• Use sealant tape or sealing compound on the tap's thread to avoid water leaks.
• Make sure that the line is not kinked or sharply bent.

NOTE

• Before connecting the water supply hose to the tap, turn on the tap to flush out foreign substances (dirt, sand or sawdust) in the water lines. Let water drain into a bucket.
• It takes about 3 – 4 minutes for the first supply water.

Preparing Electrical Wiring

Connect the appliance to an earthed socket in accordance with the current wiring regulations, protected by a minimum 15 amp circuit breaker or time delay fuse.

Wiring must be two wires with earth.

The power cord should not be positioned behind the appliance but within 1.2 meters of the side so that the plug is easily accessible.

WARNING

• For personal safety, remove house fuse or open circuit breaker or switch off power plug before installation.
• Do not use an extension cord or double adapter.
• The plug must be plugged into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances.
• Repairs to the appliance must only be carried out by qualified service personnel. Repairs carried out by inexperienced persons may cause injury or serious malfunctioning. Contact our local service centre.
• Connect to a properly rated, protected, and sized power circuit to avoid electrical overload.

Final Check

1. Turn on electrical power. 2. Turn on house water supply. 3. The door should open and close smoothly and without harsh noises, if the unit has been leveled correctly. 4. Run the appliance on a Rinse cycle to verify proper operation and check for leaks.

Error Code	Possible Cause and Solution
OE Error	Drain hose kinked or pinched.Feed the drainage and supply hoses through the hole under the sink. Then gradually slide the dishwasher into the cabinet while pulling on the hoses under the sink to take up any slack. This helps avoid kinking the hoses or trapping them beneath the dishwasher.
	Waste spigot under sink is clogged.Drill out the waste spigot under the sink.
IE Error	Water supply line kinked under dishwasher.Feed the drainage and supply hoses through the hole under the sink. Then gradually slide the dishwasher into the cabinet while pulling on the hoses under the sink to take up any slack. This helps avoid kinking the hoses or trapping them beneath the dishwasher.
	House water supply not turned on.Turn water on. Water pressure may be too high or too low.

Before Using the Appliance

This model has a water softener to soften hard water.

NOTE

• The appliance can be used without dishwasher salt if not required, however, the hardness level needs to be set to H0 so that the icon does not remain lit.
• In order to provide satisfactory rinsing results, the appliance requires soft water, i.e., containing little or no lime, otherwise water stains will be left behind on the dishes and inside the appliance.
• If the tap water exceeds a certain level of hardness, it must be softened, i.e., decalcified. This is achieved by adding dishwasher salt to the water softener inside the appliance. The required amount of the salt is set up according to how hard tap water is.

Checking Water Hardness Level

Method 1

1 Check the water hardness in your area. The water utility company can help you with this. 2 Set the softening system level of the appliance according to the water hardness level.

Method 2

You can check water hardness by using the test strip included in the product.

1 Immerse all reaction zones of the test strip for about a second. Do not in running water. 2 Shake off excess liquid from the strip and wait for 1 minute. 3 Check the water hardness color from the strip. Refer to the wrapper.

Water Hardness Table

The value of hardness	Hardness range					Water quality	Softening system level
	°d °e °f			mmol/l (Ca+Mg)	mg/l Ca
0 <4 <5	<7 <0.7 <29	Soft H0
75 4 - 7	5 - 9 7 - 13 0	7 - 1.3 29 - 50		H1
125	7 - 14	9 - 17.5	13 - 25	1.3 - 2.5	50 - 100		H2
250	14 - 21	17.5 - 26	25 - 38	2.5 - 3.8	100 - 150		H3
375	>21	>26	>38	>3.8	>150	Hard	H4

Setting the Water Softening System

For effective washing performance, adjust the setting corresponding to the hardness level of water used in water supply. The water softener has 5 adjustment levels, and the appliance is programmed at the factory for a water hardness level of H2. You can check the default setting value and adjust it in the following steps:

1 Press Power and Half Load button simultaneously.

• Current setting value indicated.

2 Press the Delay Start button, and then set up the intended value.

- Scope of setting value is H0 to H4.

3 Press the Start button to save the setting.

• The power turns off after saving.

NOTE

- The Salt Refill icon turns on in the display if dishwasher salt is not in the softening system.

- If the hardness setting is set to H0, no icon is displayed even if there is no salt.

Filling with Dishwasher Salt

The Dishwasher Salt tank must be filled before starting the washing programme. In case of insufficient salt, the Salt Refill icon is displayed on the display, unless the hardness level has been set to H0.

CAUTION

- Once you have filled with dishwasher salt, you must run the Rinse cycle immediately to remove the salt and the salt water around the inner tub in order to prevent corrosion.

1. Remove the lower rack and remove the cap of the salt container located on the left side of the filters.

2. Before using the appliance for the first time, it is necessary to pour 1 kg of dishwasher salt and 1 litre of water at the same time if intending to use the water softener system. When refilling the salt, use a funnel. Refer to the 'Before Using the Appliance' section.

3. Refit the cap tightly.

4. Run the Rinse cycle without dishes.

Salt Refill Cycle (1 kg for each load)

	H1 H2	H3 H4
Cycles 1	30 50 20	10

• The table describes information about the Auto programme. • Cycle may vary depending on the salt refill amount.

CAUTION

• Do not pour any detergent into the water softener. It will cause a malfunction.
• Wipe off any spilled salt around the water softener cap.
• Seal the cap properly by aligning it horizontally and turning it clockwise. A loosely fitted cap may cause the salt solution to leak from the compartment back into the tub and cause corrosion.
• After refilling the dishwasher salt, a wash programme should be operated without dishes, as any spilled salt inside the appliance may cause rust or damage to the appliance if left unwashed.

NOTE

- The salt can be purchased from salt distributors.

Adding Rinse Aid

The Rinse Aid indicator appears in the display when more rinse aid is needed.

The use of rinse aid is recommended to prevent water spots on dishes and to enhance drying performance.

1. Open the rinse aid lid by lifting up the flap.

2. Add liquid rinse aid to the maximum fill level. The rinse aid should be settled in the dispenser while filling, or air bubbles may result in poor drying performance. Avoid overfilling the dispenser.

3. Close the lid to lock the dispenser. Rinse aid is dispensed automatically during the final rinse cycle.

CAUTION

- Wipe off any spilled rinse aid to prevent suds.

NOTE

• Only use liquid rinse aid in the appliance.
• Do not overfill the rinse aid dispenser.
• Too much or too little rinse aid can inhibit the drying performance.

Setting the Rinse Aid Level

The dispenser has five adjustment levels. The appliance is programmed at the factory for a rinse aid dispenser level of 2. This can be checked and altered by using the buttons on the control panel.

1. Ensure the appliance is off. 2. Press Power and Dual Zone simultaneously to check the current setting. 3. Press Delay Start to change the rinse aid dispenser setting. Each press of the button changes the setting one step from L0 (off) to L4. 4. Once the desired rinse aid dispenser setting is selected, press Start to save. The power turns off after saving.

CAUTION

- If the rinse aid lid is not closed properly, a large amount of rinse aid will release into the tub and cause washability problems.

NOTE

• The Rinse Aid Refill ✦ icon will illuminate when more rinse aid is needed.
• If you notice cloudy spots, streaks or water marks on the glassware after washing, increase the setting level.
• Setting the control too high can cause foaming, which will cause poor wash performance.
• If the glass is smeared or foam is present on the bottom, decrease the level setting.
• Setting the rinse aid control too low can cause spotting and streaking on dishes and poor drying performance.

Using the Appliance

1. Press the Power button.

The unit will turn on. Check the indicators.

2. Check that there is rinse aid and dishwasher salt present.

Refill the rinse aid and the salt, if the corresponding icons illuminate. For more information, refer to the Refilling section.

: Salt Refill icon

: Rinse Aid Refill icon

3. Open the door and check the filters.

Always clean the filter either after a wash or before a wash so that it does not impair the washing performance.

4. Ensure the spray arms can rotate unobstructedly.

Ensure that the upper and lower spray arms rotate well. Remove the spray arm and clean it if it does not rotate.

5. Load the dishes in the rack.

Make certain that no dishes or utensils are in the path of the spray arms.

Do not place one dish on top of another.

6. Add the proper amount of detergent powder to the dispenser.

If using tablets, they can simply be placed directly on the base of the tub, or on the lower part of the inner door.

7. Set and start the programme.

The programme will start automatically in 4 seconds after any setting is selected.

WARNING

• Do not load any items in the upper rack when the lower rack is pulled out and loaded. Failure to do so may result in injury as the appliance could become unbalanced and topple over.
• Push the upper rack in all the way.
• Empty the lower rack first and then the upper one. This will avoid water dripping from the upper rack onto the dishes below.
• Do not open the door during operation or right after it has completed the wash cycle, as the steam may cause scalding when the door is opened.

NOTE

- Never use liquid dishwashing detergent in the appliance.

Control Panel

Non-Steam Models

Steam Models

- Depending on the model, the logo ⚙ and 📋 may be located either on the front of the appliance or the top of the door.

1 Power

- Press the Power button to turn power on and off.

- After the cycle is complete, the power automatically turns off for purposes of safety and economy.

- If there is a power surge, power outage, or disruption of any kind, power is automatically turned off for safety.

- When power is connected again, it will turn on automatically and resume the cycle.

2 Display

- 8:88 : Digital Display

- The digital display on the control panel shows the ESTIMATED cycle time. When the cycle and options are selected, the display shows the total estimated time to complete those selections. During operation, the display shows the remaining estimated operating time.

- The estimated time shown on the display does not include delay times for heating water, etc.

- If Delay Start is selected, the display shows the delay time in hours.

- The Auto cycle time may vary depending on the soil level of your load.

• : Rinse Aid Icon

- This icon flashes when the rinse aid level is low. The LED automatically shuts off when the rinse aid is refilled or the level is set to 0.

- This icon flashes after every 30 cycles.

- To activate or deactivate the icon, press the Delicate button for 3 seconds.

• Wi-Fi

- When the appliance is connected to the internet through a home Wi-Fi network, this icon illuminates.

• S : Salt Refill Icon

- This icon flashes when the salt level is low. The LED automatically shuts off when the salt is refilled.

3 Cancel

- The drain pump activates and the cycle cancels. Once the appliance finishes draining, the power turns off.

- Press and hold the Start button for 3 seconds to activate the cancel function.

4 Start

- To operate the appliance, close the door and press the Start button.

- If the Start button is not pressed to start the cycle within 4 minutes, the power will automatically turn off.

Chime On/Off

- To activate or deactivate the button sounds, press and hold Dual Zone and Energy Saver simultaneously for 3 seconds. The error alert sound cannot be turned off.

Cycles

Auto

This cycle senses the soil amount and water clarity and optimizes the wash to achieve the best cleaning. The wash time may vary depending on the soil level.

Intensive

This cycle is for heavily soiled dishes and dishes with hardened-on soil. This cycle defaults to the strongest spray intensity and uses it to wash heavily soiled dishes.

Delicate

Use this cycle to clean delicate items such as fine china and stemware.

Refresh (Steam Models)

This cycle freshens up and warms dishes that have been unused for a long time.

- Do not use detergent when using this cycle.

Eco

- It provides the most efficient energy and water consumption for a good washing performance and drying result on a normally soiled load and as it uses very little energy.

Turbo

This cycle will clean moderately soiled dishes using slightly more energy and water.

- Extra Dry is set to on as default. If you do not want to dry dishes after washing, turn off the Extra Dry option. Not drying the dishes will result in a shorter cycle time.

Download Cycle

Use a dedicated cycle downloadable via Wi-Fi or NFC. (depending on model).

NOTE

- Only the cycle code for the currently downloaded cycle appears on the appliance. See the smartphone app for cycle codes, names, and more information about the available cycles.

– Default Cycle: P1. Pots & Pans

Machine Clean

This cycle is for cleaning the inside of the appliance. Use the cycle without dishes in the appliance. It eliminates residual soils, odor, white spots, and other dirt. Add citric acid or another cleaning agent for more effective results.

- Press and hold Intensive for 3 seconds to activate.

Rinse

This cycle is a quick rinse only for dishes that will not be washed immediately. The cycle rinses dishes that have excess soil to soften dried-on residue. Rinsing the dishes helps prevent odors in the appliance.

- Do not use detergent with this option.

• This cycle does not have drying.

- Press and hold Eco for 3 seconds to activate.

Express

This cycle will quickly clean lightly soiled dishes.

- This cycle does not have drying. Select the Extra Dry option or another cycle for better drying. Extra Dry will add to the overall cycle time.

- Press and hold Turbo for 3 seconds to activate.

- Detergent tablets are not recommended for use with the Express cycle. If detergent tablets are used, they may cause detergent residue on dishes due to the relatively low rinse temperatures.

Cycle Options

Select the desired cycle button and then select the options for that cycle. For more information about Cycle Options, see the Available Options section.

Dual Zone

This option automatically sets the spray intensity to soft for the upper spray arm and strong for the lower spray arm. Place heavily soiled dishes like plates and bowls in the lower rack and lightly soiled dishes like cups and small plates in the upper rack to get the best results.

Half Load

This option washes intensively by selecting the upper or lower racks. For small loads, use just the upper or lower rack to save energy and time. By pressing the Half Load button, the settings (Upper) ⋯ (Lower) and the cancellation of this option are available.

Energy Saver

This option saves energy by reducing the wash and rinse temperatures. Wash time is increased to maintain wash performance. Do not use this cycle with heavily soiled dishes.

Steam (Steam Models)

This option adds steam during the cycle to improve wash performance.

High Temp

Raises the main wash or heating rinse temperature to improve cleaning.

- A chime will sound to alert you of any residual temperatures inside the appliance. Wait for the appliance to completely cool down before opening the door.

Extra Dry

Select the Extra Dry option for better drying performance. This option adds extra drying time to the cycle and raises the heating rinse temperature.

- When the rinse aid is empty, the Extra Dry option is selected automatically.

Delay Start

This feature delays the start of a selected cycle. Each time the Delay Start button is pressed, the delay time increases by an hour. The delay time can be set from 1 to 12 hours, in one-hour increments.

• To cancel this feature, turn the power off. - To change the cycle and cycle option, open the door and then select another cycle and cycle option. The countdown will continue.

Control Lock

This feature helps prevent settings from being changed during a cycle. Selecting this feature locks all of the buttons, except for the Power button, on the control panel. This feature does not lock the door.

• On models with the external display, while a cycle is running, press and hold Half Load and Energy Saver simultaneously for 3 seconds to activate or deactivate this feature. On models with a concealed display, open the door during operation and follow the same instruction.
• When this feature is activated, the display code will show on the display. • To start a new cycle, deactivate this feature.
• This feature can be set at any time by turning on the appliance.

Wi-Fi

Press and hold Delay Start for 3 seconds to connect to the network. Refer to SMART FUNCTIONS sections for detailed information about this feature.

Auto Open Dry (On Some Models)

The door will open automatically at the end of a programme that includes drying in order to enhance drying performance.

• This feature is not available in all models.

• To activate or deactivate this feature, press and hold the Energy Saver button and the High Temp button simultaneously for 3 seconds.

• This feature is not available when the Machine Clean and Rinse cycle is selected.

- When you select the Download Cycle, this feature may operate even if the feature is deactivated. Because the Download Cycle is designed to achieve the best performance in a specific purpose regardless of appliance settings.

- The display shows whether this feature is on or off.

WARNING

- Keep children away from the appliance while the appliance is operating. Exposure to high temperature steam may cause scalding or burns.

SignaLight™ (On Some Models)

SignaLight™ shows the status of the appliance, whether it has encountered any problems, whether it is operating normally, or whether it is ready to wash dishes.

- Depending on the model, the lamp may be located either on the front of the appliance or the top of the door.

Red (left)

- The red lamp flashes when the appliance encounters an error. For more information about the error, see the Error Code part of the TROUBLESHOOTING section.

White (middle)

• The white lamp flashes when you select an option cycle or when a cycle has been paused.
• The white lamp lights up when a cycle is running.

Green (right)

• The green lamp lights up when a cycle is finished. When the door is opened, the lamp turns off.
• If the appliance does not detect that the door has been opened, the lamp will turn off after 90 seconds.

Programme Guide (model dependent)

For Non-Steam Models

Programme Soil Level	Wash Rinse				Dry
	Pre wash	Main wash Rinse Heating rinse
Auto All levels	○	○(50 - 55 °C)	○	○(70 °C)	○
Intensive Heavy	○	○(75 °C)	○	○(70 °C)	○
Delicate Light	○	○(45 °C)	○	○(60 °C)	○
Eco Moderate	○	○(42 °C)	○	○(65 °C)	○
Turbo Moderate	○	○(65 °C)	○	○(65 °C)
Express Light	○	○(45 °C)	○	○(60 °C)
Rinse Light			○
Machine Clean		○(50 °C)	○	○(70 °C)	○

For Steam Models

Programme Soil Level	Wash Rinse				Dry
	Pre wash	Main wash Rinse Heating rinse
Auto All levels	○	○(50-55 °C)	○	○(70 °C)	○
Intensive Heavy	○	○(75 °C)	○	○(70 °C)	○
Delicate Light	○	○(55 °C)	○	○(70 °C)	○
Refresh	○		○	○(75 °C)	○
Eco Moderate	○	○(Auto Open Dry On: 49 °C)(Auto Open Dry Off: 42 °C)	○	○(Auto Open Dry On: 54 °C)(Auto Open Dry Off: 65 °C)	○
Turbo Moderate	○	○(65 °C)	○	○(65 °C)
Express Light	○	○(45 °C)	○	○(60 °C)
Rinse Light			○
Machine Clean	○	○(50 °C)	○	○(70 °C)	○

• Running time may vary according to the water temperature, ambient temperature, water pressure and voltage.
• When the Auto Open Dry feature is activated, the heating rinse temperature will be changed to 62°C.

Program	Model	Auto Open Dry Feature	Water Consumption (l)	Energy Consumption (kWh)	Duration (min)
Eco	DF415*** ON	9.64		0.83	190
	DF215**	OFF	9.64	0.93	195
Auto	DF415**	ON	11.8 - 14.5	1.00 - 1.25	150 - 162
	DF215**	OFF	11.8 - 14.5	1.15 - 1.40	185 - 195

※ The data given will vary depending on individual conditions.

Available Options

For Non-Steam Models

Programme	Options
	Dual Zone H	Half Load Energy	SaverHigh Temp	Extra Dry	Delay Start
Auto	○○○○	○○
Intensive	○○○○	○
Delicate		○○○○
Eco	○○○○	○○
Turbo	○○○○
Express	○○○○
Rinse						○
MachineClean						○
DownloadCycle						○

For Steam Models

Programme	Options
	Dual Zone	Half Load	EnergySaver	Steam	High Temp	Extra Dry	Delay Start
Auto	○○○	○	○○○
Intensive	○○		○	○○○
Delicate		○○	○		○○
Refresh				○		○○
Eco	○○○	○	○○○
Turbo	○			○	○○○
Express	○				○○○
Rinse							○
MachineClean							○
DownloadCycle							○

• The Energy Saver option is not available with the High Temp or Extra Dry option.

Information for Energy Test (EN50242)

Appliance loaded in accordance with standard specifications.

For Models with Auto Open Dry Function

• Capacity: 14 place settings • Comparability programme: Eco - Rinse Aid setting: L2 • Reference cleaner: 35 g of detergent onto the inside surface of the door. • Height-adjustable Rack-U position: Middle • Auto Open Dry setting: On

For Models without Auto Open Dry Function

• Capacity: 14 place settings • Comparability programme: Eco - Rinse Aid setting: L4 • Reference cleaner: 35 g of detergent onto the inside surface of the door. • Height-adjustable Rack-U position: Middle

Cutlery Basket

Upper Rack

a Glasses b Cups c Saucers d Large bowl Medium bowl

Lower Rack

f Small bowl g Dinner plates (Meat) h Dinner plates (Egg) i Soup plates j Oval platter k Dessert dishes (Spinach) Dessert dishes (Egg)

Loading the Dishwasher

For effective washing performance, always follow the instructions.

• Remove large particles of food debris from plates including bones etc. before loading. Always rinse off plates when loading if they are not to be washed immediately.
• Items with burnt on food should be soaked prior to loading in the appliance.
• Deep based items should be placed upside down.
• Plastic items will not dry well, compared to other items. • Make sure that all items do not touch each other.

The combination of high water temperature and appliance detergents may damage certain items. Do not wash the following items.

• Copper or anodised aluminium • Hand painted silver or gold leaf crockery • Wood or bone handled utensils • Iron or non rust proof utensils - Plastic items which are not appliance safe - Expensive ware such as silver and dishes with golden rings - Fragile item such as crystal glasses

CAUTION

• Do not place pots or pans with plastic handles in the appliance as the handles may deteriorate due to the heat and detergent.
• Water proof or long lasting lipstick smudges on glasses may not be removed during the wash.

Loading the Lower Rack

Daily Use Load

The lower rack is suitable for dinner plates, soup bowls, dishes, pots, pans, lids and even a grill tray. Plates should be positioned upright and facing the centre of the rack and pots, pans and large dishes must be turned upside down.

To make it easier to load larger dishes, the front row of tines can be folded down.

CAUTION

- Do not obstruct the rotation of the spray arms.

Folding Down the Rack Tines

Fold tines down to fit larger dishes; pull tines back up to fit smaller dishes.

Loading the Upper Rack

Daily Use Load

The upper rack is suitable for delicate items such as, small plates, long cutlery, cups, glasses and appliance safe plastic items.

Cups, glasses and bowls must be positioned upside down.

Plates should be positioned upwards with the plate.

The cup racks provide support for long steam glasses.

The left side row of tines can be folded down or the cup racks can be folded up out of the way for tall crockery items.

CAUTION

- Do not obstruct the rotation of the spray arms.

Removing and Replacing Cup Racks

The left and right cup racks are interchangeable and can be removed.

1 Slide cup rack down into its closed position.

2 Locate assembly slot (1) on cup rack and firmly pop rack off support bar on that side.

- The rack on the left pops free at the back. The rack on the right pops free at the front.

3 Slide cup rack off support bar on opposite side.

4 Reverse instructions to replace cup rack.

Height Adjustable Upper Rack

The height of the upper rack can be adjusted when you load glasses with long stems or tall crockery items.

There are three available positions for adjusting the height of the upper rack to create more space.

Lowering the Rack

Hold the rack at the centre of each side to support its weight. Then, push the button on each side to release the rack and lower it to the lower position.

Raising the Rack

Lift the rack at the centre of each side until the rack locks into place in the upper position. It is not necessary to lift the lock levers to raise the rack.

Possible plate size according to the upper rack position

Upper Rack Position	Plate Size (mm)
	Upper Rack		Lower Rack
	with Cutlery Rack	without Cutlery Rack
Upper 16	5 215 300
Middle 19	3 243 272
Lower 22	1 271 244

WARNING

Before adjusting, ensure the rack is empty of all dishes. Otherwise dishes may get damaged or you may get injured.

NOTE

• Before pushing the upper rack into the appliance, ensure the rack height is the same on both sides. If the height is not the same on both sides, the appliance door will not shut and the upper spray arm will not connect to the water inlet.
• Raise the upper rack without pushing the buttons on each side. Pushing the buttons when raising the rack will prevent the rack from locking into position.
• To set the rack to the middle position, it may be easier to lower the rack all the way down and then raise each side of the rack individually until it clicks into place.

• There is a 56 mm gain in height when the upper rack is moved to the lower position.
• After adjusting the rack levels, check that the spray arms are free to rotate.
• With the lower position of the upper rack, check if the bottom part of upper rack including spray arm is not disturbing items on the lower rack.
• When the upper rack is in the lower position, push in the upper rack first, and the lower rack later.
• Pull out the lower rack first, and the upper rack later.
• Raise the upper rack without pushing the buttons on each side. Pushing the buttons when raising the rack will prevent the rack from locking into position.
• When the upper rack is in the lower position, the possible height of dishes differs with models where the cutlery rack is fitted.

Loading the Cutlery Basket (On Some Models)

Daily Use Load

For large utensils, such as whisks, the cover can be opened by unhinging it.

Place forks and spoons in the cutlery basket with their handles facing downwards.

WARNING

• To prevent injuries, place knives and other utensils with sharp points on the cutlery basket. If you want to load them in the cutlery basket, place them with the pointed edges facing downwards.

CAUTION

• Do not obstruct the rotation of the spray arms.
• The cutlery should not be longer than 18 cm.

Loading the Cutlery Rack (On Some Models)

The cutlery rack is best suited for flatware and most cooking or serving utensils. It can also fit small prep bowls and lids. The separators on the cutlery rack help keep utensils separated to avoid damage and improve cleaning.

If the handles of your cutlery are too thick, then reverse the pieces so that the handles face the other direction.

Height Adjustable Tray (On Some Models)

The tray on the left side can be adjusted to a high or low position to accommodate utensils or cutlery of different sizes. Remove dishes before adjusting the tray. Adjust the tray by sliding the lever.

Removing the Cutlery Rack (On Some Models)

The entire cutlery rack can be removed if more space is needed on the upper rack for larger items.

Always remove the cutlery from the rack before removing the rack.

Pull the rack out to the end of the rails. Then, lift the front of the rack so that the rollers clear the stop on the end of the rail. The rack can now be slid forward and removed from the rails.

WARNING

- Be careful when loading and unloading items with sharp edges. Load sharp knives with the blade down to reduce the risk of injury.

Adding Cleaning Agents

Adding Detergent to the Dispenser

• Remove the label on the dispenser prior to running the appliance for the first time.
• The amount of detergent needed depends on the cycle, load size, and soil level of dishes.
• Put detergent into the detergent compartment before starting any cycle, except the Rinse cycle.

1 Push the button on the dispenser lid to open the cover.

2 Add dishwashing detergent to the main wash compartment until the level is between the lines marked 15 and 25.

• Fill to over the 25 line for hard water or heavily soiled loads.
• Fill to the 15 line for soft water or lightly soiled loads.

3 Push the detergent lid to slide the lid closed until it clicks.

4 If a prewash is desired, fill the recessed prewash compartment area on the lid with detergent.

Programme	Amount of detergent
	Pre wash(onto the lid)	Main wash(dispenser)
Auto 5 g 20 g
Intensive 5 g	30 g
Delicate 5 g	20 g
Refresh - -
Eco - 25 g
Turbo 5 g 20 g
DownloadCycle5 g 20 g
MachineClean5 g 20 g
Rinse - -
Express - 20 g

WARNING

- Dishwasher detergent and rinse aid contain chemical components, like all other household detergent. So, they must be kept out of the reach of children.

CAUTION

- Use only detergent intended for dishwashers. Incorrect detergent may cause the appliance to fill with suds during operation. Excess suds may reduce wash performance and may cause the appliance to leak. - To avoid damaging the appliance, do not pull up on the dispenser to close the appliance door.

- Use of an unsuitable detergent and rinse aid may result in a risk of damage, corrosion, poor washing performance, poor drying or leakage. - Only use the detergent and rinse aid that has been qualified with standard. Use of an unqualified detergent and rinse aid may present a risk of damage, corrosion, poor washing performance, poor drying, and leakage.

NOTE

• Too much detergent can leave a film on dishes and in the appliance, resulting in poor wash performance. • After washing, check whether the detergent was completely washed out.
• Some appliance detergent tablets may become stuck in the dispenser due to their excessive size. Tablets can be placed onto the base of the wash tub next to the filter before starting the cycle.
• Never use liquid dishwashing detergent in the appliance.
• Detergent tablets are not recommended for use of Express cycle. If the detergent tablets are used, it may cause detergent residue on dishes due to the relatively low rinse temperatures.

Refilling

To maintain the effective wash performance of the appliance, check and refill dishwasher salt regularly.

To maintain the effective dry performance of the appliance, check and refill rinse aid regularly.

Checking the Rinse Aid

When the Rinse Aid Refill icon illuminates lit, it means the rinse aid is almost empty. If necessary, refill the rinse aid chamber.

Checking the Dishwasher Salt

After refilling the dishwasher salt, a wash programme should be operated without dishes, as any spilled salt inside the appliance may cause rust or damage to the appliance if left unwashed.

When the Rinse Refill icon illuminates, it means the salt is almost empty. If necessary, refill the salt chamber.

CAUTION

- Do not add detergent or any other solution into the water softener housing other than dishwasher salt. Doing so will cause the water softening system to malfunction.

Drying

• Plastic items may cause poor drying performance compared to other items.
• To assist drying, the door can be opened for a short period of time after the cycle.

NOTE

• Make sure that all items do not touch each other.
• If dry performance is not good or water stains remain, add the Extra Dry option or set the rinse level.
• When using tablet type (2 in 1, 3 in 1) detergent, an additional rinse may be required, depending on the volume of dishes, in this case use the Extra Dry option or set the rinse level.
• Unloading the Dishwasher Before unload the dishes, check if the dishes cooled down to hand-warm condition.
• Empty the lower rack first and then the upper one. It will avoid water dripping from the upper rack onto the dishes below.

Unloading the Dishwasher

• Unloading the Dishwasher Before unload the dishes, check if the dishes cooled down to hand-warm condition.
• Empty the lower rack first and then the upper one. This will avoid water dripping from the upper rack onto the dishes below.

WARNING

- Do not pull out all fully loaded racks at one time; the appliance can topple over. Unload each rack one by one.

Using LG SmartThinQ Application

Things to check before using LG SmartThinQ

- For appliances with the 📄 or 📋 logo

1. Check the distance between the appliance and the wireless router (Wi-Fi network).

- If the distance between the appliance and the wireless router is too far, the signal strength becomes weak. It may take a long time to register or installation may fail.

2. Turn off the Mobile data or Cellular Data on your smartphone.

3. Connect your smartphone to the wireless router.

NOTE

• To verify the Wi-Fi connection, check that the Wi-Fi icon on the control panel is lit.
• The appliance supports 2.4 GHz Wi-Fi networks only. To check your network frequency, contact your Internet service provider or refer to your wireless router manual.

- LG SmartThinQ is not responsible for any network connection problems or any faults, malfunctions, or errors caused by network connection.

• If the appliance is having trouble connecting to the Wi-Fi network, it may be too far from the router. Purchase a Wi-Fi repeater (range extender) to improve the Wi-Fi signal strength.
• The Wi-Fi connection may not connect or may be interrupted because of the home network environment.
• The network connection may not work properly depending on the Internet service provider.
• The surrounding wireless environment can make the wireless network service run slowly.
• The appliance cannot be registered due to problems with the wireless signal transmission. Unplug the appliance and wait about a minute before trying again.
• If the firewall on your wireless router is enabled, disable the firewall or add an exception to it.
• The wireless network name (SSID) should be a combination of English letters and numbers. (Do not use special characters.)
• Smartphone user interface (UI) may vary depending on the mobile operating system (OS) and the manufacturer.
• If the security protocol of the router is set to WEP, you may fail to set up the network. Please change it to other security protocols (WPA2 is recommended) and register the product again.

Installing LG SmartThinQ

Search for the LG SmartThinQ application from the Google Play Store or Apple App Store on a smartphone. Follow instructions to download and install the application.

Wi-Fi Function

- For appliances with the 📋 or 📋 logo

You can communicate with the appliance from a smartphone using the convenient smart features.

Monitoring

This function checks the current status, cycle, options running time and cycle end time for the application on a single screen.

Download Cycle

You can download new and special cycles that are not included in the basic cycles on the appliance.

Appliances that have been successfully registered can download a variety of specialty cycles specific to the appliance.

Only one cycle can be stored on the appliance at the same time.

Once cycle download is completed in the appliance, the appliance keeps the downloaded cycle until a new cycle is downloaded.

Machine Clean Reminder

This function shows how many cycles remain before it is time to run the Machine Clean cycle.

Smart Diagnosis

This function provides useful information for diagnosing and solving issues with the appliance based on the pattern of use.

Settings

Various functions are available.

Push Alert

Turn on this function to receive appliance status notifications.

The notifications are triggered even if the LG SmartThinQ application is off.

NOTE

• If you change your wireless router, Internet service provider, or password, delete the registered appliance from the LG SmartThinQ application and register it again.
• The application is subject to change for appliance improvement purposes without notice to users. Functions may vary and are limited by model.

Declaration of Conformity

CE

Hereby, LG Electronics declares that the radio equipment type Washing Machine is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address:

http://www.lg.com/global/support/cedoc/cedoc# LG Electronics European Shared Service Centre B.V

Krijgsman 1

1186 DM Amstelveen

The Netherlands

Standby Power Consumption

Standby power consumption 0.5 W
Network standby power consumption	2.0 W
The period of time after which the power management function, or a similar function, switches the equipment automatically into standby and/or off mode and/or the condition providing networked standby	20 min.

Open Source Software Notice Information

To obtain the source code under GPL, LGPL, MPL, and other open source licenses, that is contained in this product, please visit http://opensource.lge.com.

In addition to the source code, all referred license terms, warranty disclaimers and copyright notices are available for download.

LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost of performing such distribution (such as the cost of media, shipping, and handling) upon email request to [e-mail]. This offer is valid for a period of three years after our last shipment of this product. This offer is valid to anyone in receipt of this information.

Smart Diagnosis Using a Smartphone

- For appliances with the 🎨 or 🎨 logo

Use this function if you need an accurate diagnosis by an LG Electronics customer information centre when the appliance malfunctions or fails.

This function can not be activated unless the appliance is connected to power. If the appliance is unable to turn on, then troubleshooting must be done without using this function.

Using Smart Diagnosis

Smart Diagnosis Through the Customer Information Centre

Use this function if you need an accurate diagnosis by an LG Electronics customer information centre when the appliance malfunctions or fails. Use this function only to contact the service representative, not during normal operation.

1 Press the Power button to turn the appliance on. Do not press any other buttons. 2 When instructed to do so by the call centre, place the mouthpiece of your phone close to the Smart Diagnosis icon.

3 Press and hold Download Cycle until a countdown displays on the appliance. 4 Keep the phone in place until the tone transmission has finished.

• For best results, do not move the phone while the tones are being transmitted.
• If the call centre agent is not able to get an accurate recording of the data, you may be asked to try again.

5 Once the countdown is over and the tones have stopped, resume your conversation with the call centre agent, who will then be able to assist you using the information transmitted for analysis.

NOTE

• This function depends on the local call quality. - The communication performance will improve and you can receive better service if you use the home phone. - If the data transfer is poor due to poor call quality, you may not receive the best diagnosis service.

To maintain performance and prevent problems, check the outside and inside of the appliance, including filters and spray arms regularly.

WARNING

- When cleaning the outside and inside of the appliance, do not use any solvent based solutions such as thinners or acetone. It may cause fire or explosion.

NOTE

- If you have not used the appliance for a long time, refresh the inside by running Turbo or Machine Clean programme with detergent. When the cycle is finished, clean the inside and outside of the appliance according to the Maintenance instructions.

- Prevent animals from nibbling on the power cable or water hose.

Cleaning the Exterior

In most cases, the exterior of the appliance can be cleaned with a soft damp cloth or sponge, then dried with a soft cloth. If the appliance has a stainless steel exterior, use a stainless steel cleaner.

CAUTION

- If cooking oil is spilled on the exterior of the product, wipe it off immediately. Do not clean the exterior of the product with cleaners which contain alcohol, thinners, bleach, benzene, flammable liquids, or abrasives. These substances may discolor or damage the appliance.

Cleaning the Interior

Clean the interior of the appliance periodically with a soft, damp cloth or sponge to remove food and dirt particles.

Food residue may be stuck in the narrow gaps inside the appliance after completion of washing. Wipe off all food residue.

Using Citric Acid

Remove all dishes, cutlery basket and cutlery basket holder from appliance. Only racks should remain in tub. For best results, use citric acid powder (can be found in canning sections of most supermarkets or online). Measure 3 tablespoons (45 g) of citric acid powder. Fill main wash compartment with measured powder.

Using White Vinegar

If you cannot find citric acid powder, pour approximately 3/4 - 1 1/4 cups (200 - 300 mL) of white vinegar into shallow bowl and place in upper rack. Run Auto cycle. Do not use detergent. When the cycle is finished, restart.

CAUTION

- Do not pour vinegar directly into the base.

- Excessive use of vinegar may cause damage to the appliance.

Seasonal Maintenance and Storage

- If you will be absent for an extended period of time during warmer months, close the water valve and unplug the power cord, or turn off the circuit breaker. Clean the filter, tub and dispenser to prevent odor.

- If you will be absent for an extended period of time during colder months and there is a possibility of freezing temperatures, winterize the water supply lines and the appliance itself. Winterization must be performed by qualified service personnel.

Cleaning the Filters

1. Remove the lower rack and position the bottom spray arm so a wider vee is open to the front.

2. Turn the inner filter counter-clockwise and take out the assembled inner filter and stainless steel filter.

3. Clean the filters with a soft brush under running water. Reassemble the filters before reinstalling them.

4. To replace the assembled filters, position the spray arm so the wider vee is toward the front. Fit the filters back into the filter holder and secure them by turning the inner filter clockwise until it clicks into place.

WARNING

- Be cautious of sharp edges when handling the stainless steel filter.

CAUTION

- After using the appliance, particles of food are filtered by the filters. Any unremoved food residue may cause bad smell. In addition, drainage may have a problem due to food residue stuck in the filters.

NOTE

- When assembling, rotate it firmly until it clicks.

Cleaning the Spray Arms

If the spray arm holes are blocked by any food residue, dishes may not be cleaned well due to improper water spray.

It is recommended that the spray arms be cleaned once every two weeks.

Cleaning the Lower Spray Arm

1 Make sure that the water jet holes are not blocked by food particles.

2 If any food residue blocks the spray arm holes, remove it with a pin or any sharp tool.

CAUTION

- To avoid breaking the variable angle spray arm end sections, do not pull or manually rotate them.

Cleaning the Upper Spray Arm

1 Pull the upper rack forward. Make sure that the water jet holes are not blocked by food particles.

2 When cleaning is necessary, remove the upper spray arm by turning the nut on the bottom of the spray arm 1/8 turn counterclockwise and pulling down.

3 Remove food particles by rinsing or shaking the spray arm.

4 If any food residue blocks the spray arm holes, remove it with a pin or any sharp tool.

5 After removing the food residue, clean the spray arm holes under running water.

6 After cleaning the upper spray arm, press it up into place. Turn the nut 1/8 turn clockwise to make sure that the nut locks back into place.

7 After assembly, check whether the spray arms rotate freely.

Cleaning the Water Supply Hose Filter

1 Unplug the appliance. 2 Turn off the water tap. 3 Unscrew the water supply hose. 4 Remove the seal and the plastic filter with a pair of small pliers or scissor grips.

5 Refit the filter and gasket and make sure that it is sitting correctly.

6 Refit and secure the water supply hose in reverse order. Do not use any mechanical device to tighten the hose. A soft cloth can be used to assist hand tightening.

NOTE

• A filter is fitted into the inlet of the water supply hose connection.
• If insufficient water flows into the appliance, check that the filter is not blocked.
• If there is a leak, the water supply hose will need to be checked for proper connection.
• Never over tighten the water supply valve or use mechanical devices to tighten.
• When reassembling the seal and the filter, ensure that they are free from dirt or grit that may have come from the water supply.

The appliance is equipped with an automatic error-monitoring system to detect and diagnose problems at an early stage. If the appliance does not function properly or does not function at all, check the following before you call for service:

Diagnosing Problems

Symptoms Possible Causes & Solution
Appliance will not operate.	Door is not completely closed.Level the appliance again.
	Power supply or power cord is not connected.Connect the power supply or cord properly.
	When the Control Lock feature is activated, the display code will show on the display.Deactivate the Control Lock button.Press and hold Half Load and Energy Saver simultaneously for 3 seconds to activate or deactivate this feature.
	Fuse is blown or circuit breaker tripped.Replace the fuse or reset the circuit breaker.
Appliance continuously beeps when the door is opened, during or right after a cycle has completed.	The contents of the appliance are hot and care should be used when placing your hands inside the appliance.Close the door until the appliance and dishes have cooled down. The beeping will stop if the door is closed or the interior temperature has cooled.
Water remains in sump after completion of cycle.	Drain hose is kinked or clogged.Adjust hose or clear blockage.
	Water may remain if the power supply was lost before normal end of the course or was manually disconnected.Re-start the course.
Sprays arms do not rotate smoothly.	Holes of spray arms are blocked by food particles.Clean the holes of spray arms.
Upper rack is crooked.	Rack is poorly adjusted.See the Height Adjustable Upper Rack section.
Lamps do not illuminate.	Power is not connected.Connect power supply.
There is excessive foam inside the appliance.	Failure to use the detergent exclusive for appliance.Use the detergent exclusive for appliance.
	An excessive amount of rinse may cause foam.Reduce the rinse aid dispensing level.
Detergent is left in the detergent dispenser.	Unbalanced upper rack.Adjust the left/right height of the upper rack.
	Detergent may not be dispensed because poor stacking of the dishes prevent automatic opening of the detergent dispenser.Correctly arrange the dishes and always dry out the dispenser before adding new detergent so that it does not clump together.
Water leaks outside the appliance.	The door may not be closed due to tilted appliance. In this case a water leak may occur.Check the leveling by adjust the leg.
	Wrong installation of drainage hose may cause water leak.Check the connecting part of drainage hose.
	If the power is off, a water leak may be caused by a poor connection to the tap.Check the connection water supply hose.
Cloudiness on glassware.	Combination of excessive detergent and hard water.Use less detergent and use a rinse aid to minimize the problem.Check the setting of softening system.
Black or gray marks on dishes.	Aluminum items rubbing dishes during cycle.Reposition the dishes.
Yellow or brown film on inside surfaces of appliance.	Coffee or tea stains.Eliminate the stain by using a stain removal product.
Yellow water remains inside the dishwater	When initially using the appliance, Yellow water may generate in the water softener tank.This is a normal condition, and it is harmless to humans. It disappears after 1 - 3 cycles.
Spots and filming on dishes.	Wrong amount of detergent used.Use the recommended amount of detergent.
	Overloading.Do not overload the appliance.
	Improper loading.See the OPERATION section.
	Insufficient water pressure.Water pressure should be between 0.05 - 0.6 MPa.
	Insufficient detergent.Add the recommended amount of detergent. See the OPERATION section.
	Rinse aid dispenser is empty.Refill rinse aid dispenser.
	The water softener has no salt or insufficient the salt.Check whether there is the salt in the water softener.
	Water hardness level may be set too low.Increase the hardness level setting value.
	The rinse aid may be insufficient.Refill the rinse aid or increase the dispensing level.
	Hard water buildup in the tub.Remove all dishes, cutlery basket and cutlery basket holder from appliance. Only racks should remain in tub. For best results, use citric acid powder (can be found in canning sections of most grocery stores or online). Measure 3 tablespoons (45 g) of citric acid powder. Fill main wash compartment with measured powder. If you cannot find citric acid powder, pour approximately 3/4 - 1 1/4 cups (200 - 300 mL) of white vinegar into shallow bowl and place in upper rack. Run Auto cycle. Do not use detergent. When the cycle finish, run it again.
Odor	The previous cycle was stopped before completion and residual water remains in the appliance.Turn on the power, run the Cancel cycle option to remove the residual water, then run the Quick cycle using detergent but with the appliance empty.
	There is food in the bottom of the unit or in the filter.Clean the filter and the interior according to the Maintenance section of the owner's manual.
	Unwashed dishes are left in the unit for a long time.Cycle with one cup of white vinegar in a appliance safe glass or bowl placed on the upper rack. (Vinegar is an acid, and with constant use it could damage your appliance.)
Food soil remains on dishes.	Improper cycle selection.Select correct cycle based on soil level and type of dishware being washed.
	Water temperature is too low.Check water supply connection or water heater setting.
	Dishwashing detergent was not used.Use recommended detergent.
	Low inlet water pressure.Water pressure should be between 0.05 - 0.6 MPa.
	Water jet holes on spray arms blocked.Clean the spray arms.
	Improper loading of dishes.Make sure dishes do not block spray arm rotation or interfere with detergent dispenser.
	Filters are clogged.Clean filters.
	Too much Unremoved food debris on dishes.Large particles of food residues should be removed from the dishes before staring wash.
Noise	Some level of noise is normal during operation. ·Detergent cover opening. ·Drain pump at the beginning of drain cycle.
	The appliance is not level. ·Adjust leveling feet.
	Nozzle arm knocking against dishes. ·Reposition the dishes.
	Water pressure is too high. ·Adjust water pressure.
Dishes don't dry.	Rinse agent dispenser empty. ·Check and refill the rinse agent dispenser if empty. For better drying result, slightly open the door after operation.
	Tablets used may not have a built in rinse aid. This will reduce the drying performance. ·Change to a tablet that includes a rinse agent (contact the tablet manufacturer if unsure). Alternatively, you can use a liquid rinse agent in the dispenser if the tablets don't have a rinse agent built in.
	A cycle without the Extra Dry option was selected. ·Select a cycle that defaults to the Extra Dry option.
Your home appliance and smartphone are not connected to the Wi-Fi network.	The password for the Wi-Fi that you are trying to connect to is incorrect. ·Find the Wi-Fi network connected to your smartphone and remove it, then register your appliance on LG SmartThinQ.
	Mobile data for your smartphone is turned on. ·Turn off the Mobile data of your smartphone and register the appliance using the Wi-Fi network.
	The wireless network name (SSID) is set incorrectly. ·The wireless network name (SSID) should be a combination of English letters and numbers. (Do not use special characters.)
	The router frequency is not 2.4 GHz. ·Only a 2.4 GHz router frequency is supported. Set the wireless router to 2.4 GHz and connect the appliance to the wireless router. To check the router frequency, check with your Internet service provider or the router manufacturer.
	The distance between the appliance and the router is too far. ·If the distance between the appliance and the router is too far, the signal may be weak and the connection may not be configured correctly. Move the location of the router so that it is closer to the appliance.

Error Codes

Symptoms Possible Causes & Solution
IE	Water inlet problem.Check for a clogged, kinked or frozen water supply hose.Check water supply.
OE	Drainage Problem.Check for a clogged, kinked or frozen drain hose.
	Waste spigot is clogged.Remove knockout on waste spigot.
	Filters are clogged.Clean Filters.
bE	Oversudsing caused by improper detergent, such as liquid dish soap.Do not use hand dishwashing liquids. Only use detergents which are designed for use in automatic dishwashers.To remove detergent residue in the tub, pour approximately 100~200 ml of milk into a shallow bowl, place it to the upper rack and then run the appliance on theAutocycle.
	Failure to level appliance.Make sure that the appliance is properly leveled.
HE	Heater circuit failure	Call for service if the same problem occurs again. (If the voltage exceeds 300 V, heater operation is temporarily stopped to prevent heater burnout. If this is repeated for a long time, an HE error may occur.)
FE	Excessive water supplied.
RE	Water leakage problem
tE	Thermistor failure
LE	Motor trouble
nE	Vario motor trouble

Product fiche_commission Delegated Regulation(EU) No 1059/2010
Supplier's name or trade mark LG
Supplier's model identifier DF415*** DF215**
Rated capacity, in standard place settings, for the standard cleaning cycle	14 PS
Energy efficiency class A+++ A++
Awarded an “EU Ecolabel” under Regulation (EC) No 66/2010 No
Energy consumption “X” kWh per year, based on 280 standard cleaning cycles using cold water fill and the consumption of the low power modes. Actual energy consumption will depend on how the appliance is used.	237 266		kWh/year
The energy consumption (Et) of the standard cleaning cycle 0.83 0.93 kWh
The power consumption in off mode 0.49 W
The power consumption in left-on mode 4 W
Water consumption “X” litres per year, based on 280 standard cleaning cycles. Actual water consumption will depend on how the appliance is used.	2700		litres/year
Drying efficiency class “X” on a scale from G (least efficient) to A (most efficient)	A
The ‘Eco’ is the standard cleaning cycle to which the information in the label and the fiche relates, that this programme is suitable to clean normally soiled tableware, and that it is the most efficient programme in terms of combined energy and water consumption.
Programme time for the standard cleaning cycle	190 195	min.
The duration of the left-on mode (TI)	1 min.
Airborne acoustical noise emissions	41	44	dB(A)
Free Standing

NOTE

NOTE

WARNING

NOTE

WARNING

CAUTION

Red (left)

Top shelf

WARNING

WARNING

Lowering the shelf

Raising the shelf

CAUTION

CAUTION

NOTE

http://www.lg.com/global/support/cedoc/cedoc# LG Electronics European Shared Service Centre B.V

Krijgsman 1

1186 DM Amstelveen

Netherlands

CAUTION

WARNING

CAUTION

NOTE

2 Remove the protective film from the tape.

NOTE

WARNING

NOTE

WARNING

WARNING

Red (left)

Upper basket

WARNING

Folding down the basket tines

! WARNING

Lowering the basket

Raising the basket

WARNING

WARNING

NOTE

http://www.lg.com/global/support/cedoc/cedoc# LG Electronics European Shared Service Centre B.V

Krijgsman 1

1186 DM Amstelveen

Netherlands

Using white vinegar

WARNING

WARNING

WARNING

IMPORTANT SAFETY INSTRUCTIONS 3

ENVIRONMENTAL PROTECTION....10

INSTALLATION 11

Technical specifications....11

Additional accessories (on some models)....12

IMPORTANT SAFETY INSTRUCTIONS

WARNING

• This symbol of a crossed-out wheeled bin indicates that waste electrical and electronic products (WEEE) must be disposed of separately from municipal waste.
• End-of-life electrical products may contain hazardous substances, so proper disposal of your old appliances will help prevent potential negative consequences for the environment and human health. Your old appliance may contain parts that can be reused to repair other products and other valuable materials that can be recycled to conserve limited resources.
• You can take the appliance to the store where you purchased the product, or you can contact your local waste disposal office and obtain more information about the nearest authorized WEEE collection center. For the latest information from your country, please visit www.lg.com/global/recycling.

Technical specifications

Attaching the strap to the base of the appliance

2 Pull the bottom cover to remove it.

3 Remove the double-sided adhesive tape on the back of the felt and attach it to the front bottom side of the appliance.

4 Remove the double-sided adhesive tape from the bottom and front strip.

5 Attach the black bottom strip to the bottom of the bottom cover.

2 Attach the side strip to the front side of the cabinet and then pull it downward so that the side strip adheres well to the cabinet.

3 Repeat the above steps to attach the opposite side strip to the opposite side of the cabinet.

Removing the top cover

If the height of the opening is less than 850 mm, follow these instructions.

1 Remove the 2 screws on the rear side.

2 Pull the top cover backward after removing the two screws, and then lift it to remove it.

NOTE

2 Remove the protective layer from the tape.

3 Place the tape on the underside of the work surface.

NOTE

• The moisture-proof tape is supplied in a bag for manual assembly.
• If the worktop is made of granite or waterproof materials, it is not necessary to install a moisture barrier tape.
• Condensation may occur on the underside or front edge of the worktop when the room temperature is low.

- Make sure the line is not tangled or sharply bent.

- Make sure the drain hose is straight before threading its end through the water inlet opening.

To prevent water from flowing back into the washer, one of the following methods must be used.

Method 1

CAUTION

• This appliance can be filled with hot or cold water. If the water cannot be maintained at a temperature below 65 °C, the appliance must be connected to cold water.
• To avoid water leakage, use sealing tape or sealant on the faucet.
• Make sure the line is not tangled or sharply bent.

NOTE

• Before connecting the water inlet hose to the faucet, turn on the faucet to release foreign substances (dirt, sand, or sawdust) in the water. Let the water run into a bucket.
• For the first water supply, this takes approximately 3–4 minutes.

3. Firmly reinstall the cap. 4. Run the Rinse cycle without dishes.

	H1 H2	H3 H4
Ciklusi 1	30 50 20	10

- The table contains information about the automatic program.

- The cycle may vary depending on the amount of salt loaded.

CAUTION

NOTE

- Salt can be obtained from salt distributors.

Adding rinse aid

When more rinse aid is needed, the Rinse Aid indicator is displayed on the screen.

2 Add liquid rinse aid up to the maximum fill level. The rinse aid should settle in the dispenser during filling, otherwise air bubbles could cause poor drying performance. Do not overfill the dispenser.

CAUTION

4 Make sure the spray arm rotates freely.

Make sure the upper and lower spray arms rotate well. If they do not rotate, remove the spray arm and clean it.

5 Place the dishes on the rack.

Make sure that dishes or cutlery are not placed in a way that obstructs the spray arms.

6 Add the correct amount of powder detergent to the dispenser.

7 Setting and starting the program.

WARNING

Keep children away from the appliance while it is in operation. Exposure to high-temperature steam can cause burns.

SignaLight™ (on some models)

Red (left)

The red light flashes when an error occurs on the appliance. For more information about the error, see the Error Code chapter in the TROUBLESHOOTING section.

White (center)

• The white light flashes when you select a cycle option or when the cycle is paused.
• The white light turns on when the cycle is started.

Green (right)

• The green light turns on when the cycle is finished. When the door is opened, the light turns off.
• If the appliance does not detect that the door has been opened, the light will turn off after 90 seconds.

Program Guide (depending on model)

For models without steam

Program	Razina zaprljanja	Pranje Ispiranje				Sušenje
		Pretpranje	Glavno pranje Ispiranje Toplo	ispiranje
Auto (Automatski)	Sve razine	○	○(50 - 55 °C)	○	○(70 °C)	○
Intensive (Intenzivno)	Jako	○	○(75 °C)	○	○(70 °C)	○
Delicate (Osjetljivo)	Blago	○	○(45 °C)	○	○(60 °C)	○
Eco Umjereno		○	○(42 °C)	○	○(65 °C)	○
Turbo Umjereno		○	○(65 °C)	○	○(65 °C)
Express (Brzo)	Blago	○	○(45 °C)	○	○(60 °C)
Rinse (Ispiranje)	Blago			○
Machine Clean (Čišćenje stroja)		○	○(50 °C)	○	○(70 °C)	○

For steam models

Program	Razina zaprljanja	Pranje Ispiranje				Sušenje
		Pretpranje	Glavno pranje Ispiranje Toplo	ispiranje
Auto (Automatski)	Sve razine	○	○(50 – 55 °C)	○	○(70 °C)	○
Intensive (Intenzivno)	Jako	○	○(75 °C)	○	○(70 °C)	○
Delicate (Osjetljivo)	Blago	○	○(55 °C)	○	○(70 °C)	○
Refresh (Osvježi)		○		○	○(75 °C)	○
Eco Umjereno		○	○(Sušenje sautomatskimotvaranjemuključeno: 49 °C)(Sušenje sautomatskimotvaranjemisključeno: 42°C)	○	○(Sušenje sautomatskimotvaranjemuključeno: 54 °C)(Sušenje sautomatskimotvaranjemisključeno: 65 °C)	○
Turbo Umjereno		○	○(65 °C)	○	○(65 °C)
Express (Brzo) Blago		○	○(45 °C)	○	○(60 °C)
Rinse (Ispiranje)	Blago			○
Machine Clean (Čišćenje stroja)		○	○(50 °C)	○	○(70 °C)	○

Operating time may vary depending on water temperature, ambient temperature, water pressure, and voltage.

When the Auto Open Drying feature is activated, the warm rinse temperature will change to 62°C.

Program Model		Značajka Sušenje s automatskim otvaranjem	Potrošnja vode (l)	Potrošnja energije (kWh)	Trajanje (min)
Eco	DF415***	UKLJUČENO 9,64 0,83	190
	DF215**	ISKLJUČENO	9,64 0,93	195
Auto (Automatski)	DF415**	UKLJUČENO	11,8 - 14,5	1,00 - 1,25	150 - 162
	DF215**	ISKLJUČENO	11,8 - 14,5	1,15 - 1,40	185 - 195

Upper rack

a Glasses b Cups c Small plates d Large bowls e Medium bowls

Lower rack

f Small bowls g Large plates (meat) h Large plates (egg) i Soup plates j Oval platter k Dessert dishes (spinach) Dessert dishes (egg)

Loading the dishwasher

Items not suitable for washing in the appliance

The combination of high water temperature and detergent can damage certain items. Do not wash the following.

• Copper and anodized aluminum - Hand-painted silver and gold-leafed items - Cutlery with wooden or bone handles - Iron cutlery or cutlery that is not stainless steel - Plastic items that are not dishwasher-safe - Expensive items such as silverware and gold-rimmed items • Fragile items such as crystal glasses

CAUTION

• Do not place pots and pans with plastic handles in the appliance, as the handles could be damaged by heat and detergent.
• Stains from waterproof or long-lasting lipstick on glasses may not be removed during washing.

Loading the lower rack

Loading for daily use

The lower rack is suitable for large plates, soup bowls, dishes, pots, pans, lids, and even a roasting tray.

Plates should be placed upright and facing the center of the rack, while pots, pans, and large items should be turned upside down.

To make it easier to place larger dishes in the dishwasher, the front row of tines can be folded down.

CAUTION

Loading the upper rack

Loading for daily use

The cup rack provides support for tall glasses.

The left row of tines can be folded down, or the cup racks can be folded to make room for tall dishes.

CAUTION

2 Locate the assembly slot (1) on the cup rack and firmly release the rack from the support bar on that side.

3 Slide the cup rack off the support bar on the opposite side.

Lowering the rack

Hold the rack in the middle of each side to support its weight. Then press the button on each side to release the rack and lower it to the lower position.

Raising the rack

Lift the rack in the middle of each side until it locks into place in the upper position. There is no need to lift the locking levers to raise the rack.

Possible plate sizes depending on the position of the upper rack

Položaj gornjeg stalka	Veličina tanjura (mm)
	Gornji stalak		Donji stalak
	sa stalkom za pribor za jelo	bez stalka za pribor za jelo
Gornji 16	5 215 300
Srednji 19	3 243 272
Spuštanje	221 271 244

WARNING

- Before adjusting, check that there is no dishware on the rack. Otherwise, the dishware could be damaged or you could be injured.

NOTE

• Before pushing the upper rack into the appliance, make sure that the rack height is the same on both sides. If the height is not the same on both sides, the appliance door will not close and the upper spray arm will not connect to the water inlet.
• Lift the upper rack without pressing the button on each side. Pressing the buttons while lifting the rack will prevent the rack from locking in one position.
• To set the rack in the middle position, it is simpler to lower it all the way down and then lift each side of the rack individually until it clicks into place.

WARNING

• To prevent injuries, place knives and other utensils with sharp points in the cutlery basket.
• If you want to place them in the cutlery basket, position them with the sharp edge facing down.

CAUTION

Loading the cutlery rack (on some models)

If the handles on your cutlery are too thick, turn the cutlery so that the handles are facing the other way.

Adjustable height tray (on some models)

The tray on the left side can be adjusted to a higher or lower position to accommodate cutlery of different sizes. Remove the dishware before adjusting the tray. Adjust the tray by pushing the lever.

Removing the cutlery rack (on some models)

WARNING

2 Add detergent to the main wash compartment until the level reaches between the lines marked 15 and 25.

4 If a prewash is needed, fill the recessed prewash compartment on the detergent drawer with detergent.

Program	Količina deterdženta
	Pretpranje (na poklopac)	Glavno pranje (dozator)
Auto (Automatski)	5 g 20 g
Intensive (Intenzivno)	5 g 30 g
Delicate (Osjetljivo)	5 g 20 g
Refresh (Osvježi)	-	-
Eco - 25 g
Turbo 5 g 20 g
Download Cycle (Preuzimanje ciklusa)	5 g 20 g
Machine Clean (Čišćenje stroja)	5 g 20 g
Rinse (Ispiranje)	-	-
Express (Brzo)	- 20 g

WARNING

- Dishwasher detergent and rinse aid contain chemical components, like all other household detergents. Therefore, keep them out of reach of children.

CAUTION

- Use only detergent intended for dishwashers. Incorrect detergent may cause the appliance to fill with suds during operation. Excessive suds can reduce washing efficiency and cause leakage from the appliance.

- Use of unsuitable detergent and rinse aid may cause risk of damage, corrosion, poor washing performance, poor drying, or leakage.

- Use only detergent and rinse aid that meet the specified standard. Use of non-qualified detergent and rinse aid may cause risk of damage, corrosion, poor washing performance, poor drying, or leakage.

NOTE

- Excessive detergent may leave a film on dishes and inside the appliance, resulting in poor washing performance.

- After washing, check that the detergent has been completely rinsed away.

- Some tablet detergents may remain stuck in the dispenser due to their large size. Tablets can be placed at the base of the drum near the filter before starting the cycle.

3 Connect your smartphone to the wireless router.

NOTE

• To check the wireless Wi-Fi connection, verify that the Wi-Fi icon 📋 on the control panel is lit.
• The device supports only 2.4 GHz Wi-Fi networks. To check the network frequency, contact your internet service provider or see the manual for your wireless router.
• LG SmartThinQ is not responsible for any network connection problems or any errors, malfunctions, or failures caused by the network connection.
• If the device has trouble connecting to the Wi-Fi network, it may be too far from the router. Get a Wi-Fi repeater (range extender) to improve the Wi-Fi signal strength.
• The Wi-Fi connection may not be established or may be interrupted due to the home network environment.
• The network connection may not work properly, depending on the internet service provider.
• The surrounding wireless environment may cause the wireless network to operate slowly.
• The device cannot be registered due to problems with wireless signal transmission. Turn off the device and wait about a minute before trying again.
• If the firewall is enabled on the wireless router, disable the firewall or add an exception.
• The wireless network name (SSID) should contain a combination of Latin letters and numbers. (Do not use special characters).
• The smartphone user interface (UI) may vary depending on the mobile operating system (OS) and manufacturer.
• If the router's security protocol is set to WEP, you may not be able to set up the network. Please change to other security protocols (WPA2 is recommended) and register the product again.

Installing the LG SmartThinQ application

Search for the LG SmartThinQ application in the Google Play Store or Apple App Store on your smartphone. Follow the instructions to download and install the application.

Wi-Fi function

- For devices with the logo or

You can communicate with the device using a smartphone by using the appropriate smart features.

Tracking

http://www.lg.com/global/support/cedoc/cedoc# LG Electronics European Shared Service Centre B.V

Krijgsman 1

1186 DM Amstelveen

Netherlands

Using citric acid

Remove all dishes, the cutlery basket, and the cutlery basket holder from the appliance. Only the racks should remain in the drum. For best results, use citric acid powder (can be found in the canned food sections of most supermarkets or online). Measure 3 tablespoons (45 g) of citric acid powder. Fill the main wash compartment with that amount of powder.

CAUTION

3 Clean the filters with a soft brush and running water. Reassemble the filters before placing them back into the appliance.

4 To replace the assembled filters, position the spray arm so that the wider end faces forward. Place the filters back onto the filter holder and secure them by turning the inner filter clockwise until it clicks into place.

WARNING

- Be careful of sharp edges while handling the stainless steel filter.

CAUTION

- After using the appliance, food residues are filtered by the filters. If food residues are not removed, this may cause unpleasant odors. Additionally, drainage problems may occur if food residues remain in the filters.

NOTE

CAUTION

- To avoid breaking the ends of the spray arms, do not pull or turn them by hand.

Cleaning the upper spray arm

1 Push the upper rack forward. Make sure that food residues do not block the water jet openings.

2 When cleaning is necessary, remove the upper spray arm by turning the nut at the bottom of the spray arm 1/8 turn counterclockwise and pulling downward.

5 After removing food residues, clean the spray arm openings with running water.

7 After reassembly, check that the spray arms rotate freely.

Cleaning the water supply hose filter

5 Reinstall the filter and seal and make sure they are in place.

NOTE

NOTE

CAUTION

NOTE

CAUTION

WARNING

Red (left)

Upper basket

CAUTION

CAUTION

Lowering the basket

Raising the basket

WARNING

! WARNING

NOTE

http://www.lg.com/global/support/cedoc/cedoc# LG Electronics European Shared Service Centre B.V

Krijgsman 1

1186 DM Amstelveen

Netherlands

CAUTION

WARNING

CAUTION

NOTE

NOTE

- Check whether the hose is tangled or sharply bent.

CAUTION

NOTE

CAUTION

WARNING

Red (left)

Top shelf

CAUTION

CAUTION

WARNING

WARNING

Програма	Количина детергент
	Pre Wash (Претмиење) (на капачето)	Main wash (Главно миење) (диспензер)
Auto (Автоматски)	5 g 20 g
Intensive (Интензивно)	5 g 30 g
Delicate (Деликатни)	5 g 20 g
Refresh (Освежи)	-	-
Eco (Еко) - 25 g
Turbo (Турбо)	5 g 20 g
Download Cycle (Преземање на циклус)	5 g 20 g
Machine Clean (Чистење на машината)	5 g 20 g
Rinse (Плакнење)	-	-
Express (Експресно)	- 20 g

WARNING

NOTE

http://www.lg.com/global/support/cedoc/cedoc# LG Electronics European Shared Service Centre B.V

Krijgsman 1

1186 DM Amstelveen

Netherlands

CAUTION

WARNING

CAUTION

WARNING

WARNING

CAUTION

WARNING

CAUTION

WARNING

Upper basket

CAUTION

CAUTION

WARNING

WARNING

NOTE

http://www.lg.com/global/support/cedoc/cedoc# LG Electronics European Shared Service Centre B.V

Krijgsman 1

1186 DM Amstelveen

Netherlands

CAUTION

WARNING

CAUTION

SAFETY INSTRUCTIONS....3

IMPORTANT SAFETY INSTRUCTIONS ....3

TAKE CARE OF THE ENVIRONMENT....10

INSTALLATION 11

Specifications....11

NOTE

NOTE

CAUTION

	H1 H2	H3 H4
Cicluri 1	30 50 20	10

NOTE

CAUTION

WARNING

Red (left)

Top shelf

a Glasses b Cups © Sauce boats d Large bowl e Medium bowl

Bottom shelf

CAUTION

CAUTION

Lowering the shelf

Raising the shelf

WARNING

WARNING

Program	Cantitate de detergent
	Prespălare (pe capac)	Spălare principală (dozator)
Auto 5 g 20 g
Intensive (Intens)	5 g 30 g
Delicate (Delicat)	5 g 20 g
Refresh (Reîmprospătare)	-	-
Eco - 25 g
Turbo 5 g 20 g
Download Cycle (Descărcare ciclu)	5 g 20 g
Machine Clean (Curățare mașină)	5 g 20 g
Rinse (Clătire) -
Express (Expres)	- 20 g

WARNING

NOTE

http://www.lg.com/global/support/cedoc/cedoc# LG Electronics European Shared Service Centre B.V

Krijgsman 1

1186 DM Amstelveen

Netherlands

Power consumption in Standby mode

CAUTION

WARNING

CAUTION

IMPORTANT SAFETY INSTRUCTIONS 3

ENVIRONMENTAL PROTECTION....10

INSTALLATION 11

Technical data 11

IMPORTANT SAFETY INSTRUCTIONS

WARNING

Connecting the strip to the base of the appliance

2 Pull the bottom cover and remove it.

Attaching the strip to the cabinet on the side of the appliance

To reduce noise, attach the strip to the sides of the appliance, if the opening space allows.

NOTE

2 Remove the protective film from the tape.

NOTE

CAUTION

NOTE

CAUTION

5 Insert the rack into the basket.

WARNING

Red (left)

Upper basket

a Glass tumblers b Cups © Small plates d Large bowl e Medium bowl

Lower basket

CAUTION

Folding down the basket teeth

CAUTION

2 Place the mounting hole (1) onto the glass rack stand and firmly tilt the rack onto the support on this side.

- The rack on the left side releases towards the back. The rack on the right side releases towards the front.

3 Slide the glass rack from the support rod to the opposite side.

Lowering the basket

Raising the basket

WARNING

WARNING

Program	Množstvo čistiaceho prostriedku
	Predumývanie (na veko)	Hlavné umývanie (dávkovač)
Auto 5 g 20 g
Intensive (Intenzívne)	5 g 30 g
Delicate (Jemné)	5 g 20 g
Refresh (Obnovenie)	-	-
Eco (Eko) - 25 g
Turbo 5 g 20 g
Download Cycle (Stiahnut' cyklus)	5 g 20 g
Machine Clean (Čistenie spotrebiča)	5 g 20 g
Rinse (Leštenie)	-	-
Express (Expresné)	- 20 g

WARNING

NOTE

http://www.lg.com/global/support/cedoc/cedoc# LG Electronics European Shared Service Centre B.V

Krijgsman 1

1186 DM Amstelveen

Netherlands

Power consumption in standby mode

CAUTION

3 Clean the filters with a soft brush under running water. Before reinstalling the filters, reassemble them.

4 To replace the assembled filters, position the spray arm so that the wider weld faces forward. Insert the filters back into the filter holder and secure them by turning the inner filter clockwise until it clicks into place.

WARNING

- Be careful of sharp edges when handling the stainless steel filter.

CAUTION

CAUTION

• Do not push the washing machine door with your knees.

2 Pull the bottom cover to remove it.

3 Remove the double-sided tape on the back of the felt and attach it to the front of the appliance's base.

4 Remove the double-sided tape from the bottom and front trim.

2 Attach the side trim to the front of the cabinet on the side, then press it down so it adheres well to the cabinet.

2 After removing the screws, pull the top cover back and lift it to remove it.

3 Use a Phillips screwdriver to remove the mounting pins on top.

NOTE

3 Install the tape on the underside of the countertop.

NOTE

- Make sure the hoses are not kinked or bent at sharp angles.

CAUTION

	H1 H2	H3 H4
Cikli 13	0 50 20 10

NOTE

CAUTION

5 Load the dishes into the baskets.

6 V dozirnik dodajte ustrezno količino detergenta v prahu.

OPOZORILO

Rdeča (leva)

Zgornja košara

a Kozarci b Skodelice © Krožnički d Velika skleda e Srednje velika skleda

Spodnja košara

POZOR

Zlaganje nosilcev

Polnjenje zgornje košare

Držala za skodelice nudijo oporo kozarcem s peclji.

Za nalaganje visokih posod je mogoče zložiti levo vrsto nosilcev oziroma umakniti držala za skodelice.

POZOR

Odstranjevanje in ponovno nameščanje držal za skodelice

3 Povlecite držalo z nosilca na nasprotni strani.

Znižanje košare

Hold the basket in the middle on both sides to support its weight. Then press the release button on both sides to lower the basket to a lower position.

Raising the basket

Lift the basket in the middle on both sides until it clicks into the upper position. There is no need to lift the locking levers to raise the basket.

WARNING

• To prevent personal injury, place knives and other utensils with sharp points on the cutlery basket.
• If you want to place them in the cutlery basket, their sharp edges should face downward.

CAUTION

WARNING

2 Fill the main wash compartment with detergent until the level is between the 15 and 25 marks.

• For hard water and heavily soiled dishes, fill above the 25 mark.
• For soft water and lightly soiled dishes, fill to the 15 mark.

4 To perform a pre-wash, fill the recessed compartment on the lid of the pre-wash compartment with detergent.

Program	Količina detergenta
	Predpomivanje (na pokrovu)	Glavno pomivanje (dozirnik)
Auto (Samodejno)	5 g 20 g
Intensive (Intenzivno)	5 g 30 g
Delicate (Občutljivo)	5 g 20 g
Refresh (Osvežitev)	-	-
Eco (Ekološki program)	- 25 g
Turbo 5 g 20 g
Download Cycle (Prenos programa)	5 g 20 g
Machine Clean (Čiščenje stroja)	5 g 20 g
Rinse (Izpiranje)	-	-
Express (Ekspresno)	- 20 g

WARNING

NOTE

Krijgsman 1

1186 DM Amstelveen

The Netherlands

Use of citric acid

Use of white vinegar

If you cannot get citric acid powder, pour about 3/4–1 1/4 cups (200–300 ml) of white vinegar into a shallow bowl and place it in the upper basket. Run the Auto program. Do not use detergent. When the program is finished, run it again.

CAUTION

WARNING

CAUTION

SignaLight™ (On some models)....28

NOTE

NOTE

Residue trap

CAUTION

CAUTION

3 Rinse the tub well. 4 Activate the Rinse cycle without dishes.

	H1 H2	H3 H4
Ciklet 130 50 20 10

NOTE

CAUTION

Dual Zone

Steam (Steam models)

WARNING

Red (left)

Upper rack

CAUTION

CAUTION

Lowering the rack

Raising the rack

WARNING

WARNING

Programet	Sasia e detergjentit
	Paralarje(tek kapaku)	Larja kryesore(tek dispenseri)
Auto(Automatike)	5 g 20 g
Intensive(Intensiv)	5 g 30 g
Delicate(Delikate)	5 g 20 g
Refresh(Rifresko)	-	-
Eco (Eko) - 25 g
Turbo 5 g 20 g
Download Cycle(Shkarkimi i Ciklit)	5 g 20 g
Machine Clean(Pastrimi i makinerisë)	5 g 20 g
Rinse(Shpëlarja)	-	-
Express(Ekspres)	- 20 g

WARNING

NOTE

http://www.lg.com/global/support/cedoc/cedoc# LG Electronics European Shared Service Centre B.V

Krijgsman 1

1186 DM Amstelveen

The Netherlands

CAUTION

WARNING

CAUTION

IMPORTANT SAFETY INSTRUCTIONS....3

ENVIRONMENTAL PROTECTION....10

INSTALLATION....11

Specifications 11

Optional accessories (on certain models) 12

IMPORTANT SAFETY INSTRUCTIONS

WARNING

To reduce the risk of explosion, fire, death, electric shock, or injury to persons when using the product, basic safety precautions must be followed, including the following:

Children in the household

1 Control panel and door handle 2 Front panel 3 Lower panel 4 Leveling feet 5 Drain hose 6 Water supply hose 7 Power cord

1 Upper wash rotor 2 Upper spray arm 3 Lower spray arm 4 Salt container lid 5 Filter system 6 Cutlery basket (on certain models) 7 Detergent and rinse aid dispenser 8 Cutlery shelf (on certain models) 9 Upper rack 10 Lower rack 11 Steam nozzle (steam models)

• Power supply: 220–240 V~, 50 Hz - Dimensions (width X depth X height): 600 mm X 600 mm X 850 mm - Product weight: DF215** – 49 kg, DF415*** – 52 kg - Max. capacity: DF215** / DF415*** – settings for 14 place settings • Water supply pressure: 0.05–0.6 MPa - Power consumption: 1600–1800 W

Attaching the strip to the base of the appliance

To reduce noise, attach the strip to the base of the appliance.

1 Lay the appliance down and pull both hooks at the bottom of the lower panel.

2 Pull the lower panel to remove it.

3 Remove the double-sided tape on the back of the felt and attach it to the front of the lower part of the appliance.

4 Remove the double-sided tape from the lower and front strips.

5 Attach the black lower strip to the bottom of the lower panel.

6 Attach the white front strip to the top of the lower panel.

- The front strip is longer than the lower panel. Attach the front strip so that the protruding part is equal on both sides of the lower panel.

7 Attach the lower panel to the appliance with the help of the strip.

Attaching the tape to the side chamber of the appliance

To reduce noise, attach the tape to the sides of the appliance, if space at the opening allows.

1 Remove the double-sided tape from the side tapes.

2 Attach the side tape to the front of the side chamber and then push the side tape down so that it adheres well to the chamber.

3 Repeat the above steps when attaching the tape on the opposite side to the chamber on the opposite side.

Removing the top cover

2 Pull the top cover backward after removing the two screws, then lift and remove it.

3 Remove the locating pins on the top using a Phillips screwdriver.

NOTE

- When the appliance is properly aligned, there should be no tilting, sticking, or rubbing sounds when opening the door.

Attaching the moisture blocking tape (on certain models)

When the appliance is installed without the top cover, the underside of the work surface may be damaged by steam or condensation when the door is open.

Attach the moisture blocking tape to the underside of the work surface to protect it from condensation when the appliance is opened.

2 Remove the protective film from the tape.

3 Attach the tape to the underside of the work surface.

NOTE

CAUTION

• This appliance can be supplied with hot or cold water. If the water connection cannot be maintained below 65 °C, it must be connected to cold water.
• Use sealing tape or sealing compound on the tap thread to prevent water leaks.
• Make sure the hose is not twisted or sharply bent.

NOTE

• Before connecting the water supply hose to the tap, turn on the tap to flush out foreign matter (dust, sand, or filings) from the water hose. Let the water run into a bucket.
• It takes about 3–4 minutes for the first water supply.

3 Replace the cap and screw it on tightly. 4 Run the Rinse cycle without dishes.

Salt refill cycle (1 kg for each load of dishes)

	H1 H2	H3 H4
Ciklusi 1	30 50 20	10

- The table describes information about the automatic program.

- The amount of salt for refill may vary during the cycle.

CAUTION

• Do not pour detergent into the water softener. This will cause malfunction.
• Wipe up spilled salt around the water softener cap.
• Properly tighten the lid by aligning it horizontally and turning it clockwise. A loosely fitted lid can cause the saline solution to leak from the compartment back into the tub and cause corrosion.
• After adding dishwasher salt, it is necessary to run a wash program without dishes, because any spilled salt inside the appliance can cause rusting or damage to the appliance if left unwashed.

NOTE

- Salt can be purchased from salt distributors.

Adding rinse aid

3 Close the lid to lock the dispenser. Rinse aid is dispensed automatically during the final rinse cycle.

CAUTION

- Wipe up spilled rinse aid to prevent suds.

NOTE

5 Place dishes on the rack.

Make sure that dishes and cutlery are not in the path of the spray arms.

6 Pour the appropriate amount of powder detergent into the dispenser.

If using tablets, they can simply be placed directly on the base of the wash chamber or in the lower part of the inner door.

7 Set and start the program.

The program starts automatically 4 seconds after any setting is selected.

WARNING

• Do not place items on the upper rack when the lower rack is pulled out and loaded. Doing so may cause injury because the appliance may become unbalanced and tip over. • Push the upper rack all the way in.
• First empty the lower rack, then the upper rack. This will avoid water dripping from the upper rack onto dishes below.
• Do not open the door during operation or immediately after the wash cycle has finished, as steam may cause burns when the door is opened.

NOTE

WARNING

Red (left)

Upper rack

a Glasses b Cups c Saucers d Large bowl e Medium bowl

Lower rack

f Small bowl g Shallow plates (meat) h Shallow plates (eggs) i Deep plates i Oval shallow bowl k Dessert dishes (spinach) Dessert dishes (eggs)

Loading the dishwasher

CAUTION

• Do not obstruct the rotation of the spray arms.

Folding down the rack tines

Fold the tines down to accommodate larger dishes; pull the tines back up to accommodate smaller dishes.

Inserting the upper rack

Quantity for daily use

The cup racks provide support for glasses with long stems.

CAUTION

• Do not obstruct the rotation of the spray arms.

Removing and reinstalling the cup racks

2 Locate the folding seat (1) on the cup rack and firmly push the rack out of its support on that side.

- The rack on the left side is released at the rear. The rack on the right side is released at the front.

3 Slide the cup rack off the support on the opposite side.

4 Follow the instructions in reverse order to reinstall the cup rack.

Upper rack with adjustable height

The height of the upper rack can be adjusted to accommodate glasses with long stems or tall serving pieces.

There are three available height adjustment positions for the upper rack to provide more space.

Lowering the rack

Hold the shelf at the center on both sides to support its weight. Then, press the button on both sides to release the shelf and lower it to the lower position.

Raising the shelf

Lift the shelf at the center on both sides until the shelf locks into the upper position. It is not necessary to lift the locking levers to raise the shelf.

Possible plate sizes according to the upper shelf position

Položaj gornje police	Veličina tanjira (mm)
	Gornja polica		Donja polica
	sa policom za pribor	bez police za pribor
Gornji položaj	165 215	300
Srednji položaj	193 243	272
Spuštanje	221 271 244

WARNING

- Before adjusting, make sure there is no dishware on the shelves. Otherwise, damage to the dishware and injury may occur.

NOTE

• Before pushing the shelf back into the appliance, make sure the shelf height is the same on both sides. If the height is not the same on both sides, the appliance door will not close, and the upper spray arm will not connect to the water supply.
• Raise the upper shelf without pressing the buttons on both sides. Pressing the buttons when raising the shelf will prevent the shelf from locking into position.
• To set the shelf in the middle position, it may be easier to lower the shelf all the way down, then raise both sides of the shelf individually until they click into position.

• A height increase of 56 mm is achieved when the upper shelf is moved to the lower position.
• After adjusting the shelf levels, check that the spray arms rotate freely.
• While the upper shelf is in the lower position, check that the bottom of the upper shelf, together with the spray arm, does not obstruct items on the lower shelf.
• While the upper shelf is in the lower position, push in the upper shelf first, and then the lower shelf.
• First pull out the lower shelf, and then the upper shelf.
• Raise the upper rack without pressing the buttons on both sides. Pressing the buttons while raising the rack will prevent the rack from locking into position.
• When the upper rack is in the lower position, the possible height of the dishes varies for models equipped with a cutlery rack.

WARNING

• To prevent injury, place knives and other utensils with sharp points in the cutlery basket.
• If you want to place them in the cutlery basket, put them with the sharp edges pointing downward.

CAUTION

Adjustable height tray (on some models)

The tray on the left side can be adjusted to a high or low position so that it can accommodate utensils of different sizes. Remove the dishes before adjusting the tray. Adjust the tray by moving the handle.

WARNING

- Be careful when inserting and removing items with sharp edges. Place sharp knives with the blade pointing downward to reduce the risk of injury.

3 Press the detergent dispenser cover to move and close the cover, which will click.

4 If you want a pre-wash, fill the recessed pre-wash compartment on the cover with detergent.

Program	Količina deterdženta
	Pre Wash (Pretpranje) (na poklopcu)	Main wash (Glavno pranje) (dozator)
Auto (Automatski)	5 g 20 g
Intensive (Intenzivno)	5 g 30 g
Delicate (Osetljivo)	5 g 20 g
Refresh (Osvežavanje)	-	-
Eco (Eko) - 25 g
Turbo 5 g 20 g
Download Cycle (Preuzimanje ciklusa)	5 g 20 g
Machine Clean (Čišćenje mašine)	5 g 20 g
Rinse (Ispiranje)	-	-
Express (Ekspresno)	- 20 g

WARNING

- Dishwasher detergent and rinse aid contain chemical components, as do other household detergents. Therefore, they must be kept out of the reach of children.

CAUTION

- Use only detergents designed for dishwashers. Using an unsuitable detergent may cause the appliance to fill with foam during operation. Excessive foam can reduce washing performance and lead to leaks.

- Using unsuitable detergent and rinse aid can lead to risks of damage, corrosion, poor washing performance, poor drying, or leaks.

- Use only detergent and rinse aid that meet the standard. Using unqualified detergent and rinse aid can lead to risks of damage, corrosion, poor washing performance, poor drying, and leaks.

NOTE

- Too much detergent can leave a film on the dishes and inside the appliance, leading to poor washing performance.

- After washing, check that the detergent has been completely rinsed away.

- Some detergent tablets for the appliance may get stuck in the dispenser due to their excessive size. Tablets can be placed at the bottom of the wash chamber next to the filter before starting the cycle.

NOTE

• To check the Wi-Fi connection, verify that the Wi-Fi icon is lit on the control panel.
• The appliance supports only 2.4 GHz Wi-Fi networks. To check the network frequency, contact your internet service provider or refer to the wireless router manual.
• LG SmartThinQ is not responsible for network connection problems or for any interference, malfunctions, or errors caused by network connection.
• If the appliance cannot connect to the Wi-Fi network, it may be too far from the router. Purchase a Wi-Fi signal booster (range extender) to strengthen the Wi-Fi signal.
• The connection to the Wi-Fi network may not be established or may be interrupted due to the conditions of the home network.
• Network connection may not work properly due to the internet service provider.
• Due to surrounding wireless networks, your wireless network may be slow.
• The device cannot register due to a problem with the wireless signal transmission. Turn off the device and wait about one minute before trying again.
• If the wireless router has a firewall enabled, disable the firewall or add an exception.
• The wireless network name (SSID) should consist of a combination of Latin letters and numbers. (Do not use special characters)
• The smartphone user interface may differ depending on the mobile operating system and manufacturer.
• If the router's security protocol is set to WEP, you may not be able to set up the network. Please change to other security protocols (WPA2 is recommended) and register the product again.

Installing the LG SmartThinQ application

Search for the LG SmartThinQ application in the Google Play Store & Apple App Store using your smartphone. Follow the instructions to download and install the application.

Wi-Fi function

http://www.lg.com/global/support/cedoc/cedoc# LG Electronics European Shared Service Centre B.V

Krijgsman 1

1186 DM Amstelveen

Netherlands

Using citric acid

CAUTION

3 Clean the filters with a soft brush under running water. Reassemble the filters before reinstalling them.

To reassemble the filters, position the spray arms so that the wider arm faces the front. Return the filters to the filter holder and secure them by turning the inner filter clockwise until it clicks into place.

WARNING

- Be careful of sharp edges when handling the stainless steel filter.

CAUTION

- After using the appliance, food particles are filtered through the filters. Any unremoved food residue may cause unpleasant odors. Additionally, drainage problems may occur due to residue on the filters.

NOTE

CAUTION

- To avoid breaking the ends of the variable-angle spray arms, do not pull or manually rotate them.

Cleaning the upper spray arm

1 Pull the upper rack forward. Make sure the water jet holes are not blocked by food particles.

3 Remove food particles by rinsing or shaking the spray arm.

4 If food residue blocks the spray arm holes, remove it with a needle or some sharp tool.

5 After removing food residue, clean the spray arm openings under running water.

7 After reassembly, check that the spray arms rotate freely.

5 Reinstall the filter and gasket and ensure they fit correctly.

6. Reinstall and secure the water supply hose in reverse order. Do not use any mechanical device to tighten the hose. A soft cloth may be used to assist in hand-tightening.

NOTE

- The filter is installed at the inlet of the water supply hose connection.

- If the water supply to the appliance is insufficient, check that the filter is not blocked.