Step 8 - Synthesizer Joranalogue - Free user manual and instructions
Find the device manual for free Step 8 Joranalogue in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Type de produit | Synthesizer Module (Eurorack) |
| Dimensions (Largeur) | 8 HP (40.3 mm) |
| Dimensions (Profondeur) | 35 mm (including power connector) |
| Dimensions (Hauteur) | 3U (128.5 mm) |
| Poids | 120 g |
| Alimentation | +12V: 100 mA, -12V: 20 mA, via Eurorack power header |
| Nombre d'étages | 8 steps |
| Contrôle de tension | CV inputs per step (0-10V) |
| Sorties | CV out (0-10V), Gate out (0-5V), End of sequence trigger |
| Entrées | Clock in, Reset in, CV in (for step selection) |
| Modes de séquence | Forward, Reverse, Pendulum, Random, External CV |
| Connectivité | Eurorack 16-pin ribbon cable |
| Température de fonctionnement | 0°C à 50°C |
| Humidité de fonctionnement | 5% à 90% (sans condensation) |
| Matériau du panneau | Aluminium brossé anodisé |
| Entretien et nettoyage | Chiffon doux sec ; éviter solvants et liquides |
| Sécurité | Utiliser uniquement avec une alimentation Eurorack standard ; ne pas inverser la nappe |
| Pièces détachées | Potentiomètres, switches, ICs : contactez le fabricant ou distributeur agréé |
| Réparabilité | Conception modulaire ; réparation possible par technicien qualifié |
| Garantie | 2 ans (pièces et main-d’œuvre) |
| Informations générales | Fabricant : Joranalogue Audio Design, Belgique ; modèle Step 8 |
Frequently Asked Questions - Step 8 Joranalogue
What power supply does the Joranalogue Step 8 require?
The Step 8 requires a standard Eurorack power supply with +12V (100 mA) and -12V (20 mA). Connect via a 16-pin ribbon cable, ensuring correct orientation (red stripe down).
Can I use the Step 8 as a standalone sequencer?
The Step 8 is a Eurorack module and is not designed for standalone use. It requires a Eurorack case with power and a mounting rail.
How do I set the sequence direction?
Use the direction switch on the front panel to select between Forward, Reverse, Pendulum, Random, or External CV controlled modes.
What voltage range do the CV inputs and outputs use?
CV inputs accept 0-10V. CV output is also 0-10V. Gate outputs are 0-5V.
Is the Step 8 compatible with other Eurorack modules?
Yes, it follows the Eurorack standard and can interface with any module that uses CV/gate signals (0-10V typical).
How do I reset the sequence to the first step?
Apply a gate or trigger signal to the Reset input (normally high, resets on rising edge). Alternatively, use the manual reset button.
What is the maximum clock frequency?
The Step 8 can handle clock rates up to 10 kHz, but practical audio-rate sequencing may introduce aliasing. For typical sequencing, use up to 1 kHz.
Can I use the Step 8 to generate audio-rate signals?
Yes, at high clock rates it can function as an audio oscillator or wavetable sequencer, but output signals are stepped and may require filtering.
How do I clean the module?
Use a soft, dry cloth. Avoid solvents, liquids, and abrasive cleaners to prevent damage to the panel and components.
What should I do if a step potentiometer becomes scratchy?
Spray a small amount of contact cleaner (e.g., DeoxIT) into the potentiometer while rotating it. If problem persists, contact Joranalogue support or an authorized repair center.
User questions about Step 8 Joranalogue
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Synthesizer in PDF format for free! Find your manual Step 8 - Joranalogue and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Step 8 by Joranalogue.
USER MANUAL Step 8 Joranalogue
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Joranalogue
Model : Step 8
Category : Synthesizer