HG00358 - Hedge Trimmer PARKSIDE - Free user manual and instructions

Product Type	Cordless Drill
Battery Voltage	18 V
Battery Type	Li-ion
Chuck Size	10 mm (3/8 inch) keyless
Maximum Speed	1500 rpm
Maximum Torque	30 Nm
Number of Speed Settings	2
Drilling Capacity (Steel)	10 mm
Drilling Capacity (Wood)	25 mm
Weight (without battery)	1.2 kg
Dimensions (L x W x H)	200 x 70 x 200 mm
Power Source	Battery
Battery Charger Included	Yes
Charging Time	60 minutes
Variable Speed	Yes, with trigger
Forward/Reverse	Yes
LED Work Light	Yes
Safety Clutch	Yes, overload protection
Maintenance	Clean with dry cloth; keep ventilation slots clear
Spare Parts Availability	Battery, charger, chuck, carbon brushes
Warranty	2 years

Frequently Asked Questions - HG00358 PARKSIDE

How do I charge the battery for the first time?

Charge the battery fully before first use. Use only the supplied charger. The charging time is approximately 60 minutes. A full charge ensures optimal performance.

Can I use the drill immediately after charging?

Yes, the battery is ready to use once fully charged. However, if the battery is hot from charging, allow it to cool down for a few minutes before use.

What is the maximum drilling capacity in metal?

The drill can handle up to 10 mm diameter in steel. For harder metals, use a slow speed and apply steady pressure.

How do I change the drill bit?

Turn the chuck counterclockwise to open the jaws. Insert the bit, then tighten clockwise by hand. Use the keyless mechanism for quick changes.

Is the drill suitable for screwdriving?

Yes, with adjustable torque settings. Use the clutch ring to select the desired torque to prevent over-tightening.

What should I do if the drill stops working?

Check the battery charge. If the battery is charged, inspect the carbon brushes; they may need replacement. Also, ensure the safety clutch hasn't tripped.

Can I use third-party batteries?

Only use original Parkside batteries to avoid damage and ensure safety. Third-party batteries may not meet safety standards.

How do I clean and maintain the drill?

Wipe the drill with a dry cloth. Keep ventilation slots free of dust. Do not use water or solvents. Periodically check carbon brushes.

Is there an overload protection?

Yes, the drill features a safety clutch that disengages to protect against sudden jams. Release the trigger and restart.

Where can I find spare parts?

Spare parts such as batteries, charger, and chuck are available at Parkside service centers or online. Check the manual for part numbers.

USER MANUAL HG00358 PARKSIDE

EXTENDABLE TREE PRUNER

GB CY

EXTENDABLE TREE PRUNER

Operation and safety notes

RS

TELESKOPSKE MAKAZE ZA GRANE

GB / CY Operation and safety notes Page 5

HR Upute za posluživanje i za Vašu sigurnost Stranica 13

Introduction......Page 6

Safety advice Page 6

Attaching a saw blade....Page 8

Using the loppers ...... Page 8

Setting the cutting angle....Page 8

Extending the telescopic pole ...... Page 9

Cutting and sawing branches......Page 9

Care advice......Page 9

Disposal Page 10

Warranty Page 10

Warranty claim procedure......Page 11

Service Page 12

Extendable tree pruner

- Introduction

We congratulate you on the purchase of your new product. You have chosen a high quality product. Familiarise yourself with the product before using it for the first time. In addition, please carefully refer to the operating instructions and the safety advice below. Only use the product as instructed and only for the indicated field of application. Keep these instructions in a safe place. If you pass the product on to anyone else, please ensure that you also pass on all the documentation with it.

Safety advice

The product may only be used for the outdoor two-handed cutting of bushes and shrubs. Use the product only as described and for the indicated purpose. The product is not intended for commercial use.

■ Always keep the product out of reach of children. Children often underestimate danger. Store the product indoors in an enclosed, dry place where it cannot be reached by children.
- Check that the product is in perfect condition before each use. Damaged or loose components may lead to injury.

■ DANGER OF INJURY! Never touch the cutting edges with your bare hands.

- Check that the telescopic handles are fixed in place properly. If not the shears could become loose and cause injury to you or damage to property.

Use the following personal protective equipment when using the product: Wear protective glasses, safety boots, protective gloves and a safety helmet. This should ensure you are protected from falling pieces of branches and injury from branches and thorns.

- Keep a proper footing and balance otherwise you could become injured.

WARNING! Avoid danger to life from electric shock. Do not use the shears near high voltage wires, electricity cables, electric fences, etc. Keep a minimum distance of 10 m away from high voltage wires. The shears are not insulated against electric shock resulting from contact with high voltage wires.

RISK OF INJURY AND FALLING! Do not use the shears on ladders.

■ DANGER OF INJURY! When not in use put the protective sleeve on the blades.

■ CAUTION! RISK OF INJURY! The branch and hedge shears are very sharp and dangerous. Please exercise due caution at all times when working with them.

- Attaching a saw blade (see Fig. B)

Note: Keep the protective sleeve on the saw during installing or removing it from the cutter.

□ Unscrew and remove the thumbscrew and washer.
□ Insert the saw blade.
☐ Guide the bolts through the holes in the saw blade.
☐ Re-insert the washer and secure the connection with the thumbscrew.

● Using the loppers (see Fig. D)

☐ Loosen the retaining pin of the loppers.
☐ Pull the plastic handle down to make a cut.
☐ As soon as you have finished working with the loppers, secure with the retaining pin.

● Setting the cutting angle (see Fig. E)

☐ Turn the rotating disc clockwise and choose one of the seven available angle adjustments.
☐ Turn the rotating disc anticlockwise to fix it after the angle has been adjusted.
Note: Please ensure that the turning disc is fixed, before starting work.

● Extending the telescopic pole (see Fig. F)

☐ Loosen the retaining pin to be able to extend the telescopic pole.
□ Extend the telescopic pole to the desired length.

Note: The maximum length of the combination loppers is 2.77 m, the minimum length is 2 m.

□ Fasten the retaining pin well.

Note: Please ensure after each adjustment that the retaining pin is well secured.

● Cutting and sawing branches

☐ Do not cut branches with diameters greater than 30 mm (see Fig. C).
☐ Use the branch saw for thicker branches. The maximum saw length is 300 mm (see Fig. C).

- Care advice

□ Clean the blades carefully after every use. Dirt and sap on the blades lead to rust formation, obstruction of the cutting action and plant disease.
☐ Rub the metal parts with an oiled cloth to protect them from the build up of rust.
☐ Regular care carried out properly will ensure that your shears will give you years of use.

●Disposal

The packaging is made entirely of recyclable materials, which you may dispose of at local recycling facilities.

Contact your local refuse disposal authority for more details of how to dispose of your worn-out product.

- Warranty

The product has been manufactured to strict quality guidelines and meticulously examined before delivery. In the event of product defects you have legal rights against the retailer of this product. Your legal rights are not limited in any way by our warranty detailed below.

The warranty for this product is 3 years from the date of purchase. Should this product show any fault in materials or manufacture within 3 years from the date of purchase, we will repair or replace it – at our choice – free of charge to you.

The warranty period begins on the date of purchase. Please keep the original sales receipt in a safe location. This document is required as your proof of purchase. This warranty becomes void if the product has been damaged, or used or maintained improperly.

The warranty applies to defects in material or manufacture. This warranty does not cover product parts subject to normal wear, thus possibly considered consumables (e.g. batteries) or for damage to fragile parts, e.g. switches, rechargeable batteries or glass parts.

- Warranty claim procedure

To ensure quick processing of your case, please observe the following instructions:

Please have the till receipt and the item number (e.g. IAN 123456_7890) available as proof of purchase.

You will find the item number on the type plate, an engraving on the front page of the instructions (bottom left), or as a sticker on the rear or bottom of the appliance.

If functional or other defects occur, please contact the service department listed either by telephone or by e-mail.

You can return a defective product to us free of charge to the service address that will be provided to you. Ensure that you enclose the proof of purchase (till receipt) and information about what the defect is and when it occurred.

Service

GB Service Great Britain

Tel.: [phone]

E-Mail: [e-mail]

CYServiceCyprus

Tel.:[phone]

E-Mail: [e-mail]