SHGBP 58 B3 - Curling iron SILVERCREST - Free user manual and instructions

Product Type	Curling Iron
Brand	SilverCrest
Model	SHGBP 58 B3
Barrel Diameter	32 mm
Barrel Material	Ceramic
Temperature Settings	5 levels (140°C - 200°C)
Heat-Up Time	Approx. 60 seconds
Auto Shut-Off	Yes, after 60 minutes
Swivel Cord	Yes, 360° swivel
Cool Tip	Yes
Power Supply	AC 230V, 50Hz
Power Consumption	45 W
Cable Length	1.8 m
Weight	Approx. 340 g
Dimensions	Length 30 cm
Included Accessories	Curling iron, user manual
Maintenance	Clean with damp cloth; do not use abrasive cleaners
Safety Features	Overheat protection, auto shut-off
Spare Parts Availability	Contact manufacturer support
Warranty	3 years

Frequently Asked Questions - SHGBP 58 B3 SILVERCREST

How do I adjust the temperature on the SilverCrest SHGBP 58 B3 curling iron?

Use the temperature control dial or buttons on the handle. There are 5 settings ranging from 140°C to 200°C. Select the appropriate heat for your hair type.

Can I use this curling iron on wet hair?

No, always use the curling iron on dry hair to prevent damage and ensure safety. Wet hair can cause electric shock or burn.

How long does it take to heat up?

The curling iron heats up in approximately 60 seconds. A ready indicator light will turn on when the set temperature is reached.

Does the curling iron have an automatic shut-off feature?

Yes, it has an auto shut-off function that turns off the device after 60 minutes of inactivity for safety.

How do I clean the curling iron?

Unplug and let it cool completely. Wipe the barrel with a damp cloth. Do not use abrasive cleaners or immerse in water.

What is the barrel diameter?

The barrel diameter is 32 mm, ideal for creating medium-sized curls and waves.

Can I use the curling iron on synthetic hair?

It is not recommended as high heat can damage synthetic fibers. Use low temperature settings at your own risk, but it's best to avoid.

How do I store the curling iron safely?

Allow it to cool completely, then wrap the cord loosely around the handle. Store in a dry, cool place away from children.

What should I do if the curling iron stops working?

Check the power cord and plug. If it still doesn't work, contact SilverCrest customer service. Do not attempt to repair yourself.

Is the curling iron suitable for all hair types?

Yes, with adjustable temperature settings from 140°C to 200°C, it can be used on fine, normal, and thick hair. Use lower heat for fine hair.

USER MANUAL SHGBP 58 B3 SILVERCREST

PROFESSIONAL IONIC STRAIGHTENING BRUSH SHGBP 58 B3

HOYER Handel GmbH

Tasköprüstraße 3

DE-22761 Hamburg

GERMANY

Status of information · Informationernes stand

Operating instructions

DK

ION-HÄRB∅RSTE

1. Overview 2
2. Intended purpose 3
3. Safety instructions 3
4. Items supplied 5
5. Operation 6

5.1 Switching on/off and adjusting temperature.... 6
5.2 Styling 7

1. Cleaning 7
2. Storage 8
3. Disposal 8
4. Troubleshooting 8
5. Technical specifications 9
6. Warranty of the HOYER Handel GmbH 9

1. Overview

1 Brush insert with ceramic coating
2 Display
3 +/- Buttons for temperature setting (100 °C - 200 °C in 20 °C steps)
4 On/off button
5 360° rotating cable joint with hanging loop
6 Power cable with mains plug
7 Symbol visible, when ionisation function is active
8 Symbol visible, when key lock is active
9 Temperature display
10 Bar segments, will increase during the heating phase

Thank you for your trust!

Congratulations on the purchase of your new hair straightening brush.

For a safe handling of the product and in order to get to know the entire scope of features:

• Thoroughly read these user instructions prior to initial use.
• Above all, observe the safety instructions!
• The device should only be used as described in these user instructions.
• Keep these user instructions for reference.
• If you pass the device on to someone else, please include this copy of the user instructions. The user instructions are a part of the product.

We hope you enjoy using your new hair straightening brush!

Symbols on your device

Do not use this device in the vicinity of bathtubs, showers, washbasins or other vessels containing water.

2. Intended purpose

The hair straightening brush is intended exclusively for the purpose of styling your own real human head hair.

The device is designed for private home use and must not be used for commercial purposes.

The device must only be used indoors.

Foreseeable misuse

WARNING! Risk of injury!

- Do not use the hair straightening brush for styling any other body parts, animals or objects. Do not use the device for artificial hair or hair extensions.

3. Safety instructions

Warnings

If necessary, the following warnings will be used in these user instructions:

DANGER! High risk: failure to observe this warning may result in injury to life and limb.

WARNING! Moderate risk: failure to observe this warning may result in injury or serious material damage.

CAUTION: low risk: failure to observe this warning may result in minor injury or material damage.

NOTE: circumstances and specifics that must be observed when handling the device.

Instructions for safe operation

• This device can be used by children from the age of 8 and people with restricted physical, sensory or intellectual abilities or people without adequate experience and/or understanding, if they are supervised or instructed on how to use this device safely and if they are aware of the resulting hazards. Children must not play with the device. Cleaning and user maintenance must not be performed by children unless they are supervised.
• Keep children under the age of 8 away from the device and the power cable.
  Do not use this device in the vicinity of bathtubs, showers, washbasins or other containers containing water.
• If you use the hair straightening brush in a bathroom, always pull out the mains plug afterwards. The proximity of water represents a hazard even when the device is switched off.
• If the mains power cable of this device should become damaged, it must be replaced by the manufacturer, the manufacturer's customer service department or a similarly qualified specialist, in order to avoid any hazards.
• Installation of a residual current device (FI/RCD) with a rated residual operating current of no more than 30 mA is recommended to provide additional protection. Ask your electrician for advice. The installation should only be carried out by a qualified electrician.

DANGER for children

- Children must not play with packing material. Do not allow children to play with plastic bags. There is a risk of suffocation.

DANGER to and from pets and livestock

Electrical devices can represent a hazard to pets and livestock. In addition, animals can also cause damage to the device. For this reason you should keep animals away from electrical devices at all times.

DANGER! Risk of electric shock due to moisture

• Never place the device anywhere that it could fall into water while plugged in.
• Protect the device from moisture, water drops and water splashes.
• The device, the cable and the mains plug must not be immersed in water or any other liquids.

• If liquid gets into the device, remove the mains plug immediately. Have the device checked before reusing.

• If the device has fallen into water, pull out the mains plug immediately, and only then remove the device from the water. Do not use the device again, and have it checked by a specialist workshop.

• Never touch the device with wet hands.

DANGER! Risk of electric shock

• Do not use the device if the device or the power cable has any visible damage, or if the device has previously been dropped.
• Lay the power cable such that no one can step on it, get caught on it, or trip over it.
• Only connect the mains plug to a properly installed and easily accessible wall socket whose voltage corresponds to the specifications on the rating plate. The wall socket must continue to be easily accessible after the device is plugged in.
• Ensure that the power cable cannot be damaged by sharp edges or hot points. Do not wrap the power cable around the device (Danger! Risk of cable damage!).
• Ensure that the power cable cannot be trapped or crushed.
• To pull the mains plug out of the wall socket, always pull on the mains plug, and never on the power cable.
• Disconnect the mains plug from the wall socket...

... after every use, ... if there is a fault, ... when you are not using the device, ... before you clean the device and ... during thunderstorms.

To avoid any risk, do not make modifications to the product. You also must not replace the power cable yourself. Repairs must be carried out by a specialist workshop or the Service Centre.

- Never attempt to remove dust or foreign bodies from inside the device using a pointed object (e.g. with a tail comb).

DANGER! Fire hazard

• Never leave the device unattended while it is plugged in.
• Never cover the device or place it on soft objects (e.g. towels). As long as the device is switched on and/or hot, always place it on a stable, flat, heat-resistant surface.

DANGER! Risk of injury through burning

• Do not touch the hot surfaces of the device.
• Allow the device to cool down completely before you clean it or put it away.

WARNING! Risk of material damage

• Use the original accessories only.
• Never place the device on hot surfaces (e.g. hot plates) or near heat sources or open fire.
• Do not use any astringent or abrasive cleaning agents.
• Do not expose the device to temperatures below -10 °C or above +40 °C.

4. Items supplied

1 hair straightening brush
1 user instructions

Before using for the first time

• Remove all packing material.
• Check that the device is undamaged.

5. Operation

DANGER! Fire hazard!

- Never cover the device or place it on soft objects (e.g. towels). As long as the device is switched on and/or hot, always place it on a stable, flat, heat-resistant surface.

DANGER! Risk of injury through burning!

- Never touch the hot brush insert with ceramic coating 1.

NOTE: Before using it for the first time, switch the device on for a few minutes and set it to the highest temperature (200 °C). As a result of the manufacturing process, you may notice a slight odour. This is normal and only occurs during first use. Ensure that the room is well ventilated.

5.1 Switching on/off and adjusting temperature

1. Place the device on a heat-resistant surface.
2. Connect the mains plug 6 to a properly installed and easily accessible wall socket whose voltage corresponds to the specifications on the rating plate. The wall socket must continue to be easily accessible after the device is plugged in.
3. Press the on/off button ⏻ 4 for approx. 2 seconds to switch the device on. The display 2 shows:
4. 160: if prior to switching the device on, the mains plug was disconnected.

5. The value set last if the mains plug had not been disconnected after the device was switched off last.

6. Pressing the +/- 3 buttons, set the desired temperature between 100 °C and 200 °C using 20 °C increments. Shortly after, increasing bar segments on the display 2 indicate that the device is heating up.

NOTE: decreasing bar segments indicate that the device is cooling down. Wait until the desired temperature appears on the display before straightening your hair.

1. In order to avoid changing the temperature by accidentally pressing the +/- buttons 3, these buttons are locked automatically a few seconds after being pressed last.

2. The display 2 shows 🔒 if the buttons are locked

3. To unlock: press one of the +/- 3 buttons for approx. 2 seconds. The buttons are now unlocked. The display 2 stops showing 🔒

4. Press the on/off button ⏻ 4 for approx. 2 seconds to switch the device off.

5. Allow the device to cool down on the heat-resistant surface.

Switching off automatically

If you do not press a button on the switched-on device for 30 minutes, it will switch off automatically. Before this happens, the temperature display will flash in the display 2. Press the on/off button ⏻ 4 for approx. 2 seconds to switch the device back on.

5.2 Styling

The right temperature

WARNING!

- Hair can be damaged by excessive temperature, excessively long contact or too frequent straightening. Particularly at higher temperatures, you should not treat the same strand of hair more than once.

Hair texture	Recommended temperature
bleached, dyed blonde	100 - 120 °C
fine, dyed 120 - 140 °C
normal to strong, not chemically treated	140 - 200 °C

• Start with the lowest temperature that is recommended for the hair texture to be treated.
• Increase the temperature in small steps if the straightening process is taking too long.

Ionisation function

When the device is switched on, briefly press the on/off ⏻ 4 button once to switch the ion function on or off.

The display 2 shows ≡ if the function is activated. After the function has been switched on, ions are continuously applied to the hair. This reduces the static loading of the hair and improves its stylability.

The hair becomes soft, smooth, glossy, and easier to style.

Straightening

1. Dry your hair.
2. Comb the hair well.

3. Press the on/off button ⏻ 4 for approx. 2 seconds to switch the device on. The display 2 shows 160.

4. Start with the lowest temperature that is recommended for the hair texture to be treated (see table).

5. Separate one strand and brush it smooth. Brush evenly from the hairline to the tips of the hair. Do not stay in any one spot for too long. Ensure that you keep a sufficient distance from your scalp!

6. Straighten all of your hair in this way, strand by strand.

7. Switch the device off using the on/off button 4, and allow the device to cool down.

8. Disconnect the mains plug 6 from the wall socket.

9. Allow the hair to briefly cool before you treat it further e.g. with styling or care products.

6. Cleaning

DANGER! Risk of electric shock!

• Pull out the mains plug 6 from the wall socket before cleaning the hair straightening brush.
• Allow the device to cool down before cleaning.

WARNING! Risk of material damage!

- Do not use any astringent or abrasive cleaning agents.

• Hairs that are tangled in the bristles should ideally be pulled off using your fingers.
• Clean the device regularly. Wipe down the housing of the device with a damp cloth.

7. Storage

WARNING! Risk of material damage!

- Do not wrap the cable around the device (risk of cable damage!).

• Allow the device to cool down.
• You can use the hook loop 5 to safely and practically hang up the device for storage purposes.

8. Disposal

This product is subject to the provisions of European Directive 2012/19/EC. The symbol showing a wheelie bin crossed through indicates that the product requires separate refuse collection in the European Union. This applies to the product and all accessories marked with this symbol. Products identified with this symbol may not be discarded with normal household waste, but must be taken to a collection point for recycling electric and electronic appliances.

This recycling symbol marks e.g. an object or parts of the material as valuable for recycling. Recycling helps to reduce the consumption of raw materials and protect the environment.

Packaging

When disposing of the packaging, make sure you comply with the environmental regulations applicable in your country.

9. Troubleshooting

If your device fails to function as required, please try this checklist first. Perhaps there is only a minor problem, and you can solve it yourself.

DANGER! Risk of electric shock!

- Do not attempt to repair the device yourself under any circumstances.

Fault	Possible causes / Action
None Function	Has the device been connected to the power supply?
Error messages on the display (E1, E2, E3, E4)	Disconnect the mains plug 6 from the wall socket.Allow the device to cool down.Connect the mains plug 6 with the wall socket and put the device into operation. If the device cannot be switched on, contact the Service Centre.

10. Technical specifications

Model: SHGBP 58 B3

Mains voltage: 220 - 240 V ~ 50-60 Hz

Protection class: II ☐

Power rating: 58 W

Symbols used

	Double insulation
	Geprüfte Sicherheit (certified safety). Devices must comply with the generally acknowledged rules of technology and the German Product Safety Act (Produkt-sicherheitsgesetz - ProdSG).(Not for UK.)
	With the CE marking, HOYER Handel GmbH declares the conformity with EU guidelines.
	This symbol reminds you to dispose of the packaging in an environmentally friendly manner.
	Recyclable materials: cardboard(except corrugated cardboard)

Subject to technical modifications.

11. Warranty of the HOYER Handel GmbH

Dear Customer,

your device is provided with a 3 year warranty starting with the purchase date. In the event of product defects, you are entitled to statutory rights against the vendor. These statutory rights are not restricted by our warranty presented in the following.

Warranty conditions

The warranty period starts with the purchase date. Please keep the original purchase receipt in a safe place. This document is required to verify the purchase.

If within three years from the purchase date of this product a material or factory defect occurs, the product will be repaired or replaced by us – at our discretion – free of charge to you, or the purchase price will be refunded. This warranty implies that within the period of three years the defective device and the purchase receipt are presented, including a brief written description of the defect and the time it occurred.

If the defect is covered by our warranty, the repaired or a new product will be returned to you. No new warranty period starts with a repair or replacement of the product.

Warranty period and statutory claims for defects

The warranty period is not extended when the warranty has been claimed. This also applies to replaced and repaired parts. Any damages and defects already existing at the time of purchase must be reported immediately upon unpacking. Repairs arising after the expiration of the warranty period are subject to a charge.

Warranty coverage

The device was produced carefully according to strict quality guidelines and tested diligently prior to delivery.

The warranty applies to material or factory defects.

Excluded from the warranty are wear parts subject to normal wear and damages to fragile parts, e.g. switches, batteries, lamps or other parts manufactured from glass.

This warranty expires if the product is damaged, not used as intended or not serviced. For the proper operation of the product, all instructions listed in the operating instructions must be observed carefully. Any form of use and handling that is advised against in the operating instructions or warned against must always be avoided.

The product is only intended for private and not for commercial use. In the case of incorrect and improper treatment, use of force and interventions not performed by our authorised Service Centre, the warranty shall cease.

Handling in case of a warranty claim

In order to ensure prompt processing of your matter, please observe the following notes:

• Please keep the article number
  IAN: 339679_1910 and the purchase receipt as a purchase verification for all inquiries.
• The article number can be found on the rating plate, an engraving, the title page of your instructions (in the bottom left), or as a label on the rear or underside of the device.
• If faulty operation or other defects occur, first contact the Service Centre listed in the following by telephone or email.
• Then, you are able to send a product reported as defective free of charge to the service address specified to you, including the purchase receipt and the information on the defect and when it occurred.

At www.lidl-service.com you can download this and many other manuals, product videos and installation software.

This QR code takes you directly to the Lidl Service website (www.lidl-service.com), where you can enter the article number (IAN)

339679_1910 to open your user instructions.

Service Centre

GB Service Great Britain

Tel.: [phone]

E-Mail: [e-mail]

IE Service Ireland

Tel.: [phone]

(0,08 EUR/Min., (peak))

(0,06 EUR/Min., (off peak))

E-Mail: [e-mail]

MT Service Malta

Tel.: [phone]

E-Mail: [e-mail]

CY Service Cyprus

Tel.: [phone]

E-Mail: [e-mail]

IAN: 339679_1910

Supplier

Please note that the following address is no

service address. First contact the aforementioned Service Centre.

HOYER Handel GmbH

Tasköprüstraße 3

DE-22761 Hamburg

GERMANY

Indhold