SWBP 1000 A1 - Curling iron SILVERCREST - Free user manual and instructions

Product Type	Curling Iron
Brand	SilverCrest
Model	SWBP 1000 A1
Power Consumption	1000 W
Voltage	220-240 V, 50/60 Hz
Barrel Diameter	25 mm (1 inch)
Barrel Material	Ceramic with tourmaline coating
Temperature Settings	5 adjustable levels (approx. 140-200 °C)
Heat-Up Time	Less than 60 seconds
Auto Shut-Off	Yes, after 60 minutes of inactivity
Swivel Cord	360° swivel cord for easy handling
Safety Features	Overheat protection, heat-resistant tip, stand
Dimensions (approx.)	35 x 4 x 5 cm (13.8 x 1.6 x 2.0 in)
Weight (approx.)	0.35 kg (0.77 lbs)
Cord Length	2.5 m (8.2 ft)
Includes	Curling iron, user manual, heat-resistant mat
Warranty	3-year limited warranty

Frequently Asked Questions - SWBP 1000 A1 SILVERCREST

How do I clean the curling iron?

Unplug the device and let it cool completely. Wipe the barrel with a damp cloth. Do not use abrasive cleaners or immerse in water.

What is the maximum temperature?

The maximum temperature is approximately 200 °C (392 °F) on the highest setting.

Can I use it on wet hair?

No, always use on dry hair to avoid damage and electric shock.

How long does it take to heat up?

It heats up in less than 60 seconds.

Does it have an automatic shut-off?

Yes, it automatically turns off after 60 minutes of inactivity for safety.

What is the barrel size?

The barrel diameter is 25 mm (1 inch), ideal for creating medium curls.

Is the cord swivel?

Yes, the cord swivels 360 degrees for tangle-free styling.

What voltage does it support?

It supports 220-240 V, 50/60 Hz. It is not compatible with 110 V systems without a converter.

Can I use it on extensions?

Yes, but ensure extensions are heat-resistant. Use a lower temperature setting to avoid damage.

How do I replace the power cord if damaged?

The power cord cannot be replaced by the user. Contact SilverCrest customer service for repairs.

USER MANUAL SWBP 1000 A1 SILVERCREST

Operating instructions

DE AT

IONEN-WARMLUFTBÜRSTE PROFESSIONAL

Bedienungsanleitung

04/2019 ID: SWBP 1000 A1_19_V1.3

IAN 317024 IAN 317024 GB IE NI

English....2

Deutsch.... 12

1. Overview 2
2. Intended purpose .... 3
3. Safety information .... 4
4. Items supplied 6
5. Operation 6

5.1 Switching on/off and controlling air flow.... 6
5.2 Cooling function 7
5.3 Styling.... 7
5.4 Changing the styling brushes.... 7

1. Cleaning 8

2. Storage 8

3. Disposal 8

4. Trouble-shooting 9

5. Technical specifications 9

6. Warranty of the HOYER Handel GmbH 10

1. Overview

1 Cable with mains plug
2 Hanging loop
3 Cable joint
4 Air inlet
5 On/ off switch and switch for power stages:

0 (off)
I (slow air flow, lower temperature)
II (fast air flow, higher temperature)

6 Button for the cooling function (Cool shot)
7 Ionisation outlet
8 Arrow symbol
9 Round brush
10 Air outlet
11 ▲ Release button for styling brushes
12 Semi-round brush
13 📄arking for attaching / removing a styling brush
14 📋arking for locking a styling brush

Thank you for your trust!

Congratulations on the purchase of your new Hot Air Brush Professional.

For safe handling of the product and in order to get to know the entire range of features:

• Thoroughly read these user instructions prior to initial use.
• Above all, observe the safety information!
• The device should only be used as described in this copy of the user instructions.
• Keep this copy of the user instructions for reference.
• If you pass the device on to someone else, please include this copy of the user instructions. The user instructions are a part of the product.

We hope you enjoy using your new Hot Air Brush Professional!

2. Intended purpose

The Hot Air Brush Professional is intended exclusively for the drying and styling of real, own, human head hair.

The device is designed for private home use and must not be used for commercial purposes.

The device must only be used indoors.

Foreseeable misuse

WARNING! Risk of injury!

- Do not use the Hot Air Brush for styling any other body parts, animals or objects. Do not use the device for artificial hair or hair extensions.

Symbols on your device

Do not use this device in the vicinity of bathtubs, showers, washbasins or other vessels containing water. Please observe the information in these instructions. Read these instructions before you use the device.

3. Safety information

Warnings

If necessary, the following warnings are used in this copy of the user instructions:

DANGER! High risk: failure to observe this warning may result in injury to life and limb.

WARNING! Moderate risk: failure to observe this warning may result in injury or serious material damage.

CAUTION: low risk: failure to observe this warning may result in minor injury or material damage.

NOTE: circumstances and specifics that must be observed when handling the device.

Instructions for safe operation

• This device can be used by children from the age of 8 and people with restricted physical, sensory or intellectual abilities or people without adequate experience and/ or understanding, if they are supervised or instructed on how to use this device safely and if they are aware of the resulting dangers. Children must not play with the device. Cleaning and user maintenance must not be performed by children unless they are older than 8 years and supervised.
• Keep children under the age of 8 away from the device and the power cable.
• If you use the Hot Air Brush in a bathroom, always pull out the mains plug afterwards. The proximity of water represents a hazard even when the device is switched off.
• not use this device in the vicinity of bathtubs, showers, washbasins or other vessels containing water.
• If the mains power cable of this device should become damaged, it must be replaced by the manufacturer, the manufacturer's customer service department or a similarly qualified specialist, in order to avoid any hazards.
• Installation of a residual current device (FI/ RCD) with a rated residual operating current of no more than 30 mA is recommended to provide additional protection. Ask your electrician for advice. The installation should only be carried out by a qualified electrician.

DANGER for children

- Packing materials are not children's toys. Children should not be allowed to play with the plastic bags. There is a risk of suffocation.

DANGER to and from pets and livestock

Electrical devices can represent a danger to pets and livestock. In addition, animals can also cause damage to the device. For this reason you should keep animals away from electrical devices at all times.

DANGER! Risk of electric shock due to moisture

• Never place the device anywhere that it could fall into water while plugged in.
• Protect the device from moisture, water drops and water splashes.
• The device, the cable and the mains plug must not be immersed in water or any other liquids.
• If liquid gets into the device, remove the mains plug immediately. Have the device checked before reusing.
• If the device has fallen into water, pull out the mains plug immediately, and only then remove the device from the water. Do not use the device again, and have it checked by a specialist workshop.
• Never touch the device with wet hands.

DANGER! Risk of electric shock

• Do not use the device if the device or the power cable has any visible damage, or if the device has previously been dropped.
• Lay the power cable such that no one can step on it, get caught on it, or trip over it.
• Only connect the mains plug to a properly installed and easily accessible wall socket whose voltage corresponds to the specifications on the rating plate.

The wall socket must still be easily accessible after connection.

• Ensure that the power cable cannot be damaged by sharp edges or hot spots. Do not wrap the power cable around the device (Danger! Risk of cable damage!).
• Ensure that the power cable cannot be trapped or crushed.
• To pull the mains plug out of the wall socket, always pull on the mains plug, and never on the power cable.
• Disconnect the mains plug from the wall socket ...

... after every use,
... if there is a fault,
... when you are not using the device,
... before you clean the device and
... during thunderstorms.

• To avoid any risk, do not make modifications to the product. You also must not replace the power cable yourself. Repairs must be carried out by a specialist workshop or the Service Centre.
• Never attempt to remove dust or foreign bodies from inside the device using a pointed object (e.g. with a tail comb).

DANGER - Fire hazard

• Never leave the device unattended while it is plugged in.
• Never cover the device or place it on soft objects (e.g. towels).
• Ensure that the air inlet and outlet are always kept clear. Keep the air inlet away from long hair or objects that could get sucked in.
• This device is provided with an over-heating protection. In the event of overheating, e.g. because the air inlet or outlet is covered, the device switches off automatically. In this case, set the on/off switch to 0 (off), pull the mains plug out of the wall socket and allow the device to cool down adequately. Ensure that no hair or foreign bodies are block-

ing the air inlet before switching the device back on.

• Never switch on the device at the same time as there is another device with a high power consumption attached to the same multi-socket power strip.
• Do not use an extension cable.

DANGER! Risk of injury through burning

• Do not direct the flow of hot air into eyes, onto hands, or onto any other heat-sensitive body parts.
• Do not touch the hot surfaces of the device.
• Allow the device to cool down completely before you clean it or put it away.
• Allow all accessories to cool down before removing them from the device.

WARNING! Risk of material damage

• Only use original accessories.
• Never place the device on hot surfaces (e.g. hot plates) or near heat sources or open fire.
• Do not clean using sharp objects or abrasive cleaning agents.
• Do not expose the device to temperatures below -10 °C or above +40 °C.

4. Items supplied

1 Hot Air Brush
2 Styling brushes:
1 round brush 9
1 Semi-round brush 12
1 copy of the user instructions

5. Operation

NOTE: before using it for the first time, switch the device on for a few minutes and allow it to run at the highest speed and highest temperature setting. As a result of the manufacturing process, you may notice a slight odour. This is normal and only occurs during first use. Ensure that the room is well ventilated.

Ionisation function

This device has an ionisation function that permanently applies ions to the hair to reduce the static charge of the hair and improve hair styleability.

5.1 Switching on/off and controlling air flow

1. Connect the mains plug 1 with an easily accessible wall socket. The wall socket must still be easily accessible after connection.
2. Using the on/off switch 5 and the switch for the speed settings, you can switch the device on and select the desired speed for the air flow:

0 = off

I = slow air flow, lower temperature

II = fast air flow, higher temperature

1. After drying/ styling, switch the on/off switch 5 to 0 (off) and pull out the mains plug.

5.2 Cooling function

In order to improve the durability of your sections of hair, you can cool the hair after it has been styled with hot air using the button 6 ✪.

Keep the button 6 ✦ pressed during drying in order to get a cool air flow, irrespective of the starting temperature.

When you no longer require the cool air flow, release the button 6 ✦.

5.3 Styling

The styling brushes allow targeted styling of certain sections of hair.

• Using the semi-round brush 12 you can brush the hair during drying, but also shaping your hair in gentle waves and achieve more volume at the hairline.

• The round brush 9 with heat-storing aluminium body and nylon bristles is suitable for shaping curls/ waves and gives the hair more volume.

• To form curls/ waves, rotate a strand of hair from the tip upwards around the round brush.

• Switch the device on and select the power stage required.

5.4 Changing the styling brushes

DANGER!

- Allow all accessories to cool down before removing them from the device.

Mounting the styling brush

1. Figure A: place the styling brush on the air outlet such that the left mark 13 points to the release button ▲ 11.

2. Then turn the styling brush towards the right mark 🔒 14 until you hear the styling brush click into place.

Remove the styling brush

1. Figure B: press the release button ▲ 11 and turn the styling brush to the left mark 🔒 3.

2. Remove the styling brush.

6. Cleaning

DANGER!

• Pull out the mains plug 1 from the wall socket before cleaning the Hot Air Brush.
• Allow all accessories to cool down before removing them from the device.

WARNING! Risk of material damage!

- Do not clean using sharp objects or abrasive cleaning agents.

Clean the device regularly. Particularly ensure that the air inlet 4 and the air outlet 10 are free of dust, hair and fluff.

• Wipe down the casing, the protective grid over the air inlet 4, and the styling brushes using a lightly moistened cloth.
• Remove the styling brushes from the Hot Air Brush. Hold the Hot Air Brush with the air outlet 10 pointing downwards. Clean the air outlet grille with a brush.

7. Storage

WARNING! Risk of material damage!

- Do not wrap the cable around the device (risk of cable damage!).

- You can use the hanging loop 2 to safely and practically hang up the device for storage purposes.

8. Disposal

This product is subject to the provisions of European Directive 2012/19/EC. The symbol showing a wheelie bin crossed through indicates that the product requires separate refuse collection in the European Union. This applies to the product and all accessories marked with this symbol. Products identified with this symbol may not be discarded with normal household waste, but must be taken to a collection point for recycling electric and electronic appliances.

This recycling symbol marks e.g. an object or parts of the material as valuable for recycling. Recycling helps to reduce the consumption of raw materials and protect the environment.

Packaging

When disposing of the packaging, make sure you comply with the environmental regulations applicable in your country.

9. Trouble-shooting

If your device fails to function as required, please try this checklist first. Perhaps there is only a minor problem, and you can solve it yourself.

DANGER! Risk of electric shock!

- Do not attempt to repair the device yourself under any circumstances.

Fault	Possible causes / Action
No function	Has the device been connected to the power supply?Has the overheating protection switched off the device? Set the on/ off switch 5 to 0 (off), pull the mains plug 1 out of the wall socket and allow the device to cool down adequately. Ensure that no hair or foreign bodies are blocking the air inlet before switching the device back on.

10. Technical specifications

Model:	SW BP 1000 A1
Mains voltage: 2	20-240 V ~ 50-60 Hz
Protection class: II
Power rating: 1000 W

Symbols used

	Double insulation
	With the CE marking, HOYER Handel GmbH declares the conformity with EU guidelines.
	This symbol reminds you to dispose of the packaging in an environmentally friendly manner.
	Recyclable materials: cardboard (except corrugated cardboard)

Subject to technical modifications.

11. Warranty of the HOYER Handel GmbH

Dear Customer,

your device is provided with a 3 year warranty starting with the purchase date. In the event of product defects, you are entitled to statutory rights against the vendor. These statutory rights are not restricted by our warranty presented in the following.

Warranty conditions

The warranty period starts with the purchase date. Please keep the original purchase receipt in a safe place. This document is required to verify the purchase.

If within three years from the purchase date of this product a material or factory defect occurs, the product will be repaired or replaced by us – at our discretion – free of charge to you, or the purchase price will be refunded. This warranty implies that within the period of three years the defective device and the purchase receipt are presented, including a brief written description of the defect and the time it occurred.

If the defect is covered by our warranty, the repaired or a new product will be returned to you. No new warranty period starts with a repair or replacement of the product.

Warranty period and statutory claims for defects

The warranty period is not extended when the warranty has been claimed. This also applies to replaced and repaired parts. Any damages and defects already existing at the time of purchase must be reported immediately upon unpacking. Repairs arising after the expiration of the warranty period are subject to a charge.

Warranty coverage

The device was produced carefully according to strict quality guidelines and tested diligently prior to delivery. The warranty applies to material or factory defects.

Excluded from the warranty are wear parts subject to normal wear and damages to fragile parts, e.g. switches, batteries, lamps or other parts manufactured from glass.

This warranty expires if the product is damaged, not used as intended or not serviced. For the proper operation of the product, all instructions listed in the operating instructions must be observed carefully. Any form of use and handling that is advised against in the operating instructions or warned against must always be avoided.

The product is only intended for private and not for commercial use. In the case of incorrect and improper treatment, use of force and interventions not performed by our authorised Service Centre, the warranty shall cease.

Handling in case of a warranty claim

In order to ensure prompt processing of your matter, please observe the following notes:

- Please keep the article number IAN: 317024 and the purchase receipt as a purchase verification for all inquiries.

- The article number can be found on the rating plate, an engraving, the title page of your instructions (in the bottom left), or as a label on the rear or underside of the device.

- If faulty operation or other defects occur, first contact the Service Centre listed in the following by telephone or email.

- Then, you are able to send a product reported as defective free of charge to the service address specified to you, including the purchase receipt and the information on the defect and when it occurred.

At www.lidl-service.com you can download this and many other manuals, product videos and installation software.

This QR code takes you directly to the Lidl Service website (www.lidl-service.com), where you can enter the article number (IAN) 317024 to open your user instructions.

Service Centre

GB Service Great Britain

Tel.: [phone]

E-Mail: [e-mail]

IE Service Ireland

Tel.: [phone]

(0,08 EUR/ Min., (peak))

(0,06 EUR/ Min., (off peak))

E-Mail: [e-mail]

MT Service Malta

Tel.: [phone]

E-Mail: [e-mail]

CY Service Cyprus

Tel.: [phone]

E-Mail: [e-mail]

IAN: 317024

Supplier

Please note that the following address is no service address. First contact the aforementioned Service Centre.

HOYER Handel GmbH

Tasköprüstraße 3

DE-22761 Hamburg

GERMANY

Inhalt