BT02GR - Docking Station BLAUPUNKT - Free user manual and instructions

Brand	Blaupunkt
Model	BT02GR
Product Type	Docking Station
Dimensions (approx.)	200 x 120 x 80 mm
Weight (approx.)	0.5 kg
Power Supply	USB-C or DC 5V, 2A
Compatible Devices	Smartphones, tablets, MP3 players
Audio Output	3.5mm AUX, Bluetooth 5.0
Charging Function	Supports up to 10W charging output
Speaker	Built-in 2x 5W stereo speakers
Controls	Play/Pause, volume, next/prev track
Connectivity	Bluetooth, AUX-in, USB-A (for charging device)
Bluetooth Version	5.0
Bluetooth Range	Up to 10 meters
Battery	Built-in 2200 mAh rechargeable battery
Battery Life (Music)	Up to 8 hours
Charging Time	Approx. 3 hours
Care & Cleaning	Wipe with dry cloth; avoid liquids
Safety Features	Overcharge protection, short-circuit protection
Spare Parts / Repairability	Battery and speaker replaceable by technician
Included Accessories	USB-C cable, AUX cable, user manual

Frequently Asked Questions - BT02GR BLAUPUNKT

How do I pair my phone with the Blaupunkt BT02GR docking station?

Enable Bluetooth on your phone and search for devices. Select BT02GR from the list. If prompted, enter 0000 as the PIN. The indicator light will turn solid when connected.

Can I charge my phone while using the speaker?

Yes, the docking station has a USB-A port that can charge your device. Simply connect your phone's charging cable to the USB-A port. Note that the charging speed is up to 5V/2A.

The sound is distorted or no sound comes out. What should I do?

First, check the volume level on both the docking station and your device. Ensure the AUX cable is properly connected (if using). Try re-pairing via Bluetooth. If the issue persists, reset the device by holding the power button for 10 seconds.

How do I clean the docking station?

Use a soft, dry cloth to wipe the exterior. Do not use any liquids or abrasive cleaners. Avoid getting moisture into the ports.

Can I connect it to my TV via AUX?

Yes, you can connect the docking station to a TV using the 3.5mm AUX cable included. Plug one end into the docking station's AUX-in port and the other into the TV's headphone jack.

How long does the battery last?

The built-in 2200 mAh battery provides up to 8 hours of continuous music playback at moderate volume. Charging takes approximately 3 hours via USB-C.

Can I use the docking station while it's charging?

Yes, you can use the docking station while it is plugged in. The USB-C port supports simultaneous charging and operation.

What does the LED indicator mean?

A solid blue light indicates Bluetooth is connected. A flashing blue light means the device is in pairing mode. Red light indicates charging or low battery.

Is the docking station compatible with iPad tablets?

Yes, as long as the iPad has Bluetooth or a 3.5mm headphone jack. The docking station's USB-A port can also charge the iPad but at standard 2A output.

How do I reset the docking station to factory settings?

Press and hold the Volume + and Power buttons simultaneously for 5 seconds until the LED flashes quickly. This clears all paired devices.

USER MANUAL BT02GR BLAUPUNKT

Enjoy it.

Bluetooth speaker Głośnik Bluetooth Bluetooth reproduktor Bluetooth reproduktor Bluetooth hangszóró

IMPORTANT NOTES

To achieve the utmost in enjoyment and performance, and in order to become familiar with its features, please read this manual carefully before attempting to operate this product. This will assure you years of trouble free performance and listening pleasure.

• This safety and operating instruction should be retained for future reference.
• The apparatus should not be exposed to dripping or splashing or placed in a humid atmosphere such as a bathroom. • Do not install the product in the following areas:
• Places exposed to direct sunlight or close to radiators.
• On top of other stereo equipment that radiate too much heat.
• Blocking ventilation or in a dusty area.
• Areas where there is constant vibration. • Humid or moist places. • Do not place near candles or other naked flames. • Operate the product only as instructed in this manual.

For safety reasons, do not remove any covers or attempt to gain access to the inside of the product. Refer any servicing to qualified personnel.

Do not attempt to remove any screws, or open the casing of the unit; there are no user serviceable parts inside. Refer all servicing to qualified service personnel.

SAFETY INSTRUCTIONS

1. Read Instructions - All the safety and operating instructions must be read before the product is operated.
2. Retain Instructions - The safety and operating

Instructions should be kept with the product for future reference.

1. Heed warnings - All warnings on the product and in the operating instructions should be adhered to.
2. Follow instructions - All operating and users' instructions should be followed.
3. Water and moisture - To reduce the risk of fire or electric shock, do not expose the product to rain, dripping, splashing or excessive moisture such as in a sauna or bathroom. Do not use this product near water, for example, near a bathtub, washbowl, kitchen sink, laundry tub, in a wet basement or near a swimming pool (or similar).
4. Object and Liquid Entry - Never push objects of any kind into this product through openings, as they may touch dangerous voltage points or short-circuit parts that could result in a fire or electric shock. Never spill liquid of any kind on the product. Do not place any object containing liquid on top of the product.
5. Servicing - Do not attempt to service this product yourself, as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.
6. Replacement parts - When replacement parts are required, ensure that the service technician has used replacement parts specified by the manufacturer or have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock or other hazards.
7. Place your clock radio on a stable surface, away from sources of direct sunlight or excessive heat or moisture.
8. Protect your furniture when placing your units on a

natural wood and lacquered finish by using a cloth or protective material between it and the furniture.

1. Clean your unit with a soft cloth moistened only with mild soap and water. Stronger agents such as Benzine, thinner or similar materials can damage the surface of the unit. Make sure the unit is unplugged before cleaning.

12. Battery

1). The batteries must not be exposed to excessive heat such as sunshine, fire or the like.

2). The batteries should be drawn to the environmental aspects of battery disposal.

WARNING

This appliance is not intended for use by persons (including children) with reduced physical sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance.

1. The apparatus must not be exposed to dripping or splashing and that objects filled with liquids, such as vases, must not be placed on the apparatus.
2. To prevent fire or shock hazard, do not expose this equipment to hot places, rain, moisture or dust.
3. Do not locate this unit near any water sources e.g. taps, bathtubs, washing machines or swimming pools. Ensure that you place the unit on a dry, stable surface.
4. Do not place this unit close to a strong magnetic field.
5. Do not place the unit on a amplifier or receiver.
6. Do not place this unit in a damp area as the moisture will

affect the life of electric components.

1. If the clock is brought directly from a cold to a warm location, or is placed in a very damp room, moisture may condense on the lens inside the player. If this occurs, the system will not operate properly. Please leave the system turned on for about an hour until the moisture evaporates.
2. Do not attempt to clean the unit with chemical solvents as this might damage the finish. Wipe with a clean, dry or slightly damp cloth.

NOTICE

CE

This product complies with the radio interference requirements of the European community.

Your product is designed and manufactured with high quality materials and components, which can be recycled and reused.

When this crossed-out wheeled bin symbol is attached to a product it means that the product is covered by the European Directive 2002/96/EC. Please inform yourself about the local separate collection system for electrical and electronic

products. Please act according to your local rules and do not dispose of your old products with your normal household waste. Correct disposal of your old product helps to prevent potential negative consequences for the environment and human health.

Your product contains batteries covered by the European Directive 2006/66/EC, which cannot be disposed of with normal household waste. Please inform yourself about the local rules on separate collection of batteries because correct disposal helps to prevent negative consequences for the environment and human health.

Environmental information

All unnecessary packaging has been omitted. We have tried to make the packaging easy to separate into three materials: cardboard (box), polystyrene foam (buffer) and polyethylene (bags, protective foam sheet). Your system consists of material which can be recycled and reused if disassembled by a specialized company. Please observe the local regulations regarding the disposal of packaging materials, exhausted batteries and old equipment.

Recording and playback of material might require consent. See Copyright Act 1956 and The Performer's Protection Acts 1958 to 1972.

INSTRUCTION

This product is a portable Bluetooth sound system supporting stereo music, equipped with digital signal processing technology. It is suitable for various environments such as offices and homes, and can be wirelessly connected to most other devices and mobile phones that support Bluetooth, allowing for high-quality stereo music playback from those devices and phones.

FEATURES

• Built-in Bluetooth® Handsfree (HFP) and audio streaming (A2DP & AVRCP). • Built-in high-fidelity magnetically-shielded speakers.
• Supports microSD cards up to 32GB, allowing direct playback of music from the card. Supports MP3/WMA audio files. • Can be used as an external speaker with a computer. • FM radio function. • Audio output and AUX IN function. • Built-in rechargeable 800mAh lithium battery.

LOCATION OF CONTROLS

1. -: Skip Forward/ Volume Down Button.

In Bluetooth mode and during playback, press the button to skip to the previous track, and press and hold the button to decrease volume.

In FM radio mode, press the button to skip to the previous channel.

2. ▶: Play/ Pause Button

In Bluetooth mode and during music playback, press the button to play or pause the music. When a call comes in during playback, press the button to pause the music and answer the call; when the call ends, press the button again to resume music playback.

In FM radio mode, press it to automatically search for channels, and press it again to stop the search.

During playback, press the button to play or pause the music.

Press and hold the button to switch modes: Bluetooth mode/ microSD card mode/ FM radio/ AUX mode.

Note: The AUX IN and microSD card playback modes are only available when you connect an external AUX IN audio cable and insert a microSD card into the unit.

3. +: Skip Backward / Volume UP Button

In Bluetooth mode and during playback, press the button to skip to the next track, and press and hold the button to increase the volume.

In FM radio mode, press the button to skip to the next channel.

4. Indicators and Microphone.

5. :microSD card slot.

It supports MicroSD cards up to 32GB.

6. ON/OFF: Power ON/OFF switch.

Slide the switch to ON to turn on the speaker, and slide it to OFF to turn it off.

7. DC 5V (For charging)

Insert the small plug from the supplied USB cable into the mini USB port on the unit, and insert the other plug into the USB port on a personal computer or any USB charger with DC 5V, 500mA (or more than 300mA) output. During charging, the red indicator will turn on; when charging is complete, it will turn off.

8. AUX IN

For external audio source input, use the supplied 3.5mm audio cable for connection. Please adjust the volume directly from your external player.

9. AUX OUT/ Headphone

For external audio player output, use the supplied 3.5mm audio cable for connection. Alternatively, you can plug in headphones/earphones to listen to music from the speaker.

BATTERY CHARGING

Before playing the speaker, please follow the steps below to install the battery and charge it in order to provide power. The unit has a built-in rechargeable battery inside.

1. Open the battery cover at the bottom of the unit and install the supplied 3.7V, 800mAh lithium-ion rechargeable battery directly with correct polarity, then close the battery cover as shown in the following photo.

Step 1: Open the battery cover.

Step 2: Load the battery correctly.

Step 3: Close the battery cover.

1. Connect the speaker to a computer or any USB

charger using the supplied USB cable as follows: Insert the small plug from the supplied USB cable into the Mini USB Port on the unit, and insert the other plug into the USB Port on a personal computer or any USB charger with DC 5V, 500mA (or more than 500mA) output.

1. During charging, the red indicator will turn on. When charging is complete, it will turn off.

Notes:

The battery lifetime will last longer if you follow the simple guidelines below for charging and storing.

a. For the first charge, charge it for at least 10 hours. The battery will provide the best performance after fully charging and discharging 3 times. It is better to charge the unit after it is completely discharged; otherwise, it may impact the battery's lifetime. b. Recharge and store the unit within the temperature range of 5°C to 35°C (40°F to 95°F). c. Do not charge the battery for longer than 24 hours. Excessive charging may shorten the battery's life. d. During charging, you can play music at the same time. e. Please do not use it in high humidity and high temperature environments for a long time. f. Please turn off the speaker if it will not be used for a long time.

Important:

We do not recommend taking out the battery and playing music based on USB power connection directly, because that may cause unexpected noise.

Due to prolonged charging and discharging, the unit's battery life will be affected and playback time will also be shortened. We cannot guarantee consistent playback throughout, and this is not covered by our warranty and service.

1. Slide the Power ON/OFF switch to the ON position to turn on the speaker. The blue indicator will light up and blink.
2. On first use or when re-pairing to a new BLUETOOTH device, pair the unit to an external BLUETOOTH device as follows:

a. Power on the external BLUETOOTH device and enter search mode. When the external BLUETOOTH device finds the unit, the model number "BLAUPUNKT BT02" will appear on the display of the external BLUETOOTH device. You may need to enter the pairing code "0000".

b. Start pairing according to the on-screen instructions on the external BLUETOOTH device. After pairing is successful, the blue indicator will stop blinking.

Attention:

• Please make sure your Bluetooth device is stereo before connecting it.
• Not all Bluetooth devices are the same, so read your Bluetooth device (such as iPhone, iPad, laptop, etc.) instructions carefully before connecting. If the Bluetooth is not in pairing mode, please reboot the speaker. The password is 0000 if necessary.
• Play music on the paired BLUETOOTH device as usual. The blue indicator will blink slowly.
• During music playback:

a. Press the "-" button to skip to the previous track; press and hold the "-" button to decrease volume. b. Press the ▶ button to pause; the blue indicator will stop blinking. Press again to resume normal playback, and the blue indicator will blink slowly. c. Press the "+" button to skip to the next track; press and hold the button to increase volume.

1. If the unit is paired to a cell phone, when a call comes in during music playback, press the button to pause the music and answer the phone. When the call ends, press the button again to resume music playback.

Note:

In phone pick-up mode, it is better to keep your mouth less than 30 cm away from the speaker's microphone for better sound quality reception.

1. When playing music, you can connect the 3.5mm jack on the supplied audio cable to the AUX OUT jack on the speaker, and connect the other 3.5mm jack to the AUX IN jack on any external audio player. The speaker will then act as a player for the external audio player.
2. In Bluetooth mode, you can press and hold the button to exit and switch to other modes.
3. When you have finished listening, slide the Power ON/OFF Switch to the OFF position to turn off the speaker.

- The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by 2N-Everpol Sp. z o.o. is under license. Other trademarks and trade names are those of their respective owners.

TF-CARD MODE

1. Insert the microSD card into the microSD card slot.
2. Slide the Power ON/OFF Switch to the ON position to turn on the speaker, then press and hold the button to select microSD card mode. The blue indicator will blink slowly and the music on the microSD card will play automatically.
3. Press the "-" button to skip to the previous track; press and hold the "-" button to decrease the volume.
4. Press the ▶ button to pause the music and the blue

indicator will stop blinking. Press it again to resume normal playback, and the blue indicator will blink slowly.

1. Press the "+" button to skip to the next track; press and hold the button to increase the volume.
2. When playing music, you can connect the 3.5mm jack on the supplied audio cable to the AUX OUT jack on the speaker, and connect the other 3.5mm jack to the AUX IN jack on any external audio player. The speaker will then act as a player for the external audio player.
3. In microSD card mode, you can press and hold the button to exit and switch to other modes.
4. When you have finished listening, slide the Power ON/OFF Switch to the OFF position to turn off the speaker.

FM RADIO MODE

1. Before playing and tuning the FM radio, insert the mini USB plug from the supplied USB cable into the mini USB port on the speaker, or plug in the supplied 3.5mm stereo audio cable as an FM antenna for better reception.
2. Slide the Power ON/OFF Switch to the ON position to turn on the speaker, then press and hold the button to choose FM radio mode. The Blue indicator will light and stop blinking.
3. Press the ▶ button to search for channels automatically; the Blue indicator will blink. Press it again to stop the search, and the Blue indicator will stop blinking.
4. Press the “-” button to skip to the previous channel. Press and hold the “-” button to decrease volume.
5. Press the “+” button to skip to the next music track. Press and hold the button to increase volume.
6. When playing music, you can connect the 3.5mm jack on the supplied audio cable to the AUX OUT jack on the

speaker, and connect the other 3.5mm jack to the AUX IN jack on any external audio player. It will act as a player for the external audio player.

1. In FM mode, you can press and hold the button to exit and switch to other modes.
2. When finished listening, slide the Power ON/OFF Switch to the OFF position to shut off the speaker.

AUX IN MODE

1. Connect the 3.5mm jack on the supplied audio cable to the AUX OUT/Line OUT/Phones jack on any external audio player, and connect the other 3.5mm jack to the AUX IN jack on the speaker.
2. Slide the Power ON/OFF Switch to the ON position to turn on the speaker. The Blue indicator will light up and enter AUX mode. Play the music on the connected player as usual.
3. During playback, press the button to play/pause the music.
4. In AUX mode, you can unplug the audio cable or press and hold the ▶ button to exit.
5. When finished listening, slide the Power ON/OFF Switch to the OFF position to shut off the speaker.

Important:

In the Bluetooth or microSD card playback mode, if you plug in the 3.5mm stereo audio cable, the speaker will switch to AUX IN play mode automatically.

SPECIFICATION:

• Bluetooth version: 2.1+EDR • Support L2CAP/A2DP (AVCTP / AVDTP / AVCRP to receive stereo audio signal and control the Prev/Next operation of

the audio transmitter by agreement.

• Support HFP (Handsfree profile), equipped with a speakerphone for voice communications. • Frequency range: 2.401-2.480 GHz (2.4GHz ISM Segment) • Frequency Response: 20Hz~20kHz • Transmit power: Class2, less than 4dBm, low radiation. - Scope: <10 meters of wireless communication (consistent with the Bluetooth protocol specifications CLASS 2) • The receiver sensitivity: <-90dBm, BER <0.1% • Coincide with IEEE 802.11 • FM Frequency: 87.5~108.00MHz • Speaker: 4ohm, 3W - Rated power: 2W - SNR: 90dB • Distortion: <1% • Power supply: Built-in 800mAh rechargeable lithium battery • Charging time from empty battery: approximately 7 hours • Work voltage: 3.6-4.2V • Work current: <30mA (Bluetooth module) • Work current: <400mA (power amplifier, Bluetooth) • Standby current: <3mA • Product dimensions: 62 x 62 x 60mm • Product weight: 166g • Accessory: 1 pc x USB charging cable, 1 pc x Audio cable

IMPORTANT INFORMATION

Competence Centre Audio

2N-Everpol Sp. z o.o.

ul. Puławska 403A

02-801 Warsaw, Poland

phone: [phone]

e-mail: [e-mail]

www.blaupunkt.com

Enjoy it.

All rights reserved. All brand names are registered trademarks of their respective owners. Specifications are subject to change without prior notice.