ZOOM DOT - Shooting Accessories BUSHNELL - Free user manual and instructions

Product type	Red dot sight with zoom
Brand	BUSHNELL
Model	ZOOM DOT
Power supply	CR-1/3 N 3 V lithium battery, positive side facing out
Intensity adjustment	Automatic via ambient light sensor
Dot diameter range	1 MOA (minimum) to 10 MOA (maximum)
Zoom dial	Turn clockwise to increase dot (10 MOA), counterclockwise to reduce (1 MOA) and cut power at stop
Unlocking pin	Allows unscrewing the dial to access the battery
Main functions	Fast target acquisition, precision shooting, power saving by closing lens covers
Maintenance and cleaning	No specific cleaning mentioned; keep lens covers closed to extend battery life
Safety	Do not press the electronic unlocking pins; unlocking them simultaneously causes an electronic explosion
Spare parts and repairability	CR-1/3 N battery replaceable; repair under 2-year warranty (parts and labor)
Warranty	Limited 2-year warranty; requires $10 payment for postage and return
General information	Red dot sight for shooting applications with variable zoom; fast acquisition and precision

Frequently Asked Questions - ZOOM DOT BUSHNELL

How to adjust the red dot intensity?

The intensity adjusts automatically via the ambient light sensor. Simply open the lens covers so the sensor can measure the target's light.

How to replace the battery of the Bushnell Zoom Dot?

Press the unlocking pin and unscrew the zoom dial completely. Remove the old battery and insert a CR-1/3 N 3 V lithium battery with the positive side facing out. Screw the dial back in place.

How to switch to fast target acquisition mode?

Turn the zoom dial clockwise to the stop of the unlocking pin to achieve the largest dot diameter (10 MOA). Open both eyes and acquire the target.

How to turn off the sight?

Turn the zoom dial counterclockwise to the stop of the unlocking pin. The power will be cut. Leave the dial in this position for long-term storage to preserve the battery.

What to do if the red dot does not illuminate?

Check that the lens covers are open (they must be open to turn on the dot). If the dot still does not illuminate, replace the battery with a new CR-1/3 N 3 V lithium battery. Make sure the zoom dial is not in the off position (counterclockwise stop).

How to reduce the dot diameter for precision shooting?

Turn the zoom dial counterclockwise. The minimum diameter is 1 MOA. Continue to the stop to cut power.

What type of battery does the Bushnell Zoom Dot use?

It uses a CR-1/3 N 3 volt lithium battery. The positive side must face outward during installation.

Is there any risk when handling the unlocking pins?

Yes, do not press both electronic unlocking pins at the same time, as this would cause the electronic assembly to explode with a spring. Only operate them separately.

How to extend battery life?

Close the lens covers when the sight is not in use. This extends battery life by thousands of hours.

What to do if the sight is defective during warranty?

The limited two-year warranty covers defects in parts and labor. Return the product postpaid with a $10 payment, your name and address, a description of the problem, and proof of purchase. For products purchased outside the US and Canada, contact your local dealer.

USER MANUAL ZOOM DOT BUSHNELL

Operating Instructions:

The Zoom Dot is equipped with automatic dot intensity adjustment. Simply open the lens covers. Ambient light at the target is sensed by the electronic circuit, and the dot intensity is adjusted. Close the lens covers to extend the battery life to thousands of hours.

Fast target acquisition:

Turn the Zoom Knob clockwise until it stops for largest dot size. (10 MOA.)

This position is the ready position for fast target acquisition.

1. Open the lens covers
2. Acquire the target with both eyes open.

Precision Shooting:

Turn the Zoom Knob counter clockwise to reduce dot size.

(1 MOA.) is the minimum size.

If the Zoom Knob is turned all the way to the counter clockwise position, the battery will be disconnected.

The Zoom Knob should be left in this position for long-term storage to preserve the battery.

To replace the battery, press the release pin and unscrew the Zoom Knob completely out. Remove the old battery and replace with a CR-1/3 N 3Volt Lithium battery. Plus + facing out.

Caution:

Do not press the Electronics Release Caps. Releasing both snaps at the same time will cause the Electronics Package to be expelled with a spring.

WARRANTY/REPAIR - TWO-YEAR LIMITED WARRANTY

Your Bushnell® product is warranted to be free of defects in materials and workmanship for two years after the date of purchase. In the event of a defect under this warranty, we will, at our option, repair or replace the product, provided that you return the product postage prepaid. This warranty does not cover damages caused by misuse, improper handling, installation, or maintenance provided by someone other than a Bushnell Authorized Service Department.

Any return made under this warranty must be accompanied by the items listed below:

1) A check/money order in the amount of $10.00 to cover the cost of postage and handling
2) Name and address for product return
3) An explanation of the defect
4) Proof of Date Purchased
5) Product should be well packed in a sturdy outside shipping carton, to prevent damage in transit, with return postage prepaid to the address listed below:

IN U.S.A. Send To:

Bushnell Outdoor Products

Attn.: Repairs

8500 Marshall Drive

Lenexa, Kansas 66214

IN CANADA Send To:

Bushnell Outdoor Products

Attn.: Repairs

25A East Pearce Street, Unit 1

Richmond Hill, Ontario L4B 2M9

For products purchased outside the United States or Canada please contact your local dealer for applicable warranty information.

In Europe you may also contact Bushnell at:

Bushnell Outdoor Products GmbH

European Service Centre

MORSESTRASSE 4

D-50769 KÖLN

GERMANY

Tel: [phone]

Fax: [phone]

This warranty gives you specific legal rights.

You may have other rights which vary from country to country.

©2009 Bushnell Outdoor Products

Bushnell Outdoor Products

Attn.: Repairs

8500 Marshall Drive

Lenexa, Kansas 66214

AU CANADA, envoyer à:

Bushnell Outdoor Products

Attn.: Repairs

25A East Pearce Street, Unit 1

Richmond Hill, Ontario L4B 2M9

BUSHNELL Outdoor Products GmbH

European Service Centre

©2009 Bushnell Outdoor Products

Bushnell Outdoor Products

Attn.: Repairs

8500 Marshall Drive

Lenexa, Kansas 66214

EN CANADÁ enviar a:

Bushnell Outdoor Products

Attn.: Repairs

25A East Pearce Street, Unit 1

Richmond Hill, Ontario L4B 2M9

BUSHNELL Outdoor Products GmbH

European Service Centre

Bushnell Outdoor Products

Attn.: Repairs

8500 Marshall Drive

Lenexa, Kansas 66214

Adresse in KANADA:

Bushnell Outdoor Products

Attn.: Repairs

25A East Pearce Street, Unit 1

Richmond Hill, Ontario L4B 2M9

BUSHNELL Outdoor Products GmbH

European Service Centre

©2009 Bushnell Outdoor Products

Bushnell Outdoor Products

Attn.: Repairs

8500 Marshall Drive

Lenexa, Kansas 66214

Recapito in Canada:

Bushnell Outdoor Products

Attn.: Repairs

25A East Pearce Street, Unit 1

Richmond Hill, Ontario L4B 2M9

European Service Centre

©2009 Bushnell Outdoor Products

Bushnell Outdoor Products

Attn.: Repairs

8500 Marshall Drive

Lenexa, Kansas 66214

NO CANADÁ REMETER PARA:

Bushnell Outdoor Products

Attn.: Repairs

25A East Pearce Street, Unit 1

Richmond Hill, Ontario L4B 2M9

European Service Centre

©2009 Bushnell Outdoor Products

Bushnell

For further questions or additional information please contact:

Bushnell Outdoor Products

9200 Cody, Overland Park, Kansas 66214

4 rue Diderot, Suresnes, France 92150

[phone]

www.bushnell.com

©2009 Bushnell Outdoor Products