TrailScout 119937 - Uncategorized BUSHNELL - Free user manual and instructions
Find the device manual for free TrailScout 119937 BUSHNELL in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Trail Camera |
| Brand | Bushnell |
| Model | TrailScout 119937 |
| Resolution | 8 MP |
| Detection Range | Up to 60 feet |
| Night Vision | Infrared LEDs for clear night images |
| Trigger Speed | 0.3 seconds |
| Power Source | 8 x AA batteries |
| Battery Life | Up to 6 months depending on usage |
| Dimensions | 5.5 x 4.0 x 3.0 inches |
| Weight | 1.0 lb (without batteries) |
| Memory Storage | SD/SDHC card up to 32 GB (not included) |
| Image Format | JPEG |
| Video Resolution | 720p HD video with audio |
| Operating Temperature | -20°F to 120°F (-29°C to 49°C) |
| Mounting Options | Strap or stake mount included |
| Waterproof Rating | IPX4 splash-proof design |
| Field of View | 50 degrees |
| Additional Features | Time lapse mode, adjustable PIR sensitivity |
| Maintenance | Clean lens with soft microfiber cloth; replace batteries as needed |
| Safety | Keep away from water; do not open housing; use manufacturer-recommended batteries |
| Repairability | Replaceable batteries and SD card; no user-serviceable internal parts |
| General Information | Designed for outdoor wildlife monitoring with easy setup and reliable operation |
Frequently Asked Questions - TrailScout 119937 BUSHNELL
How do I install batteries in the Bushnell TrailScout 119937?
Open the bottom compartment by sliding the latch. Insert 8 AA batteries following the polarity markings. Close securely.
What type of SD card does the camera support?
It supports SD or SDHC cards up to 32 GB. Format the card in the camera before first use.
How do I set the date and time?
Turn the camera on, press the Menu button, navigate to 'Date/Time' using the arrow keys, and set using the OK button.
Why is the camera not taking pictures at night?
Ensure night vision mode is enabled. The infrared LEDs should glow faintly in low light. If not, check that batteries are fresh and the sensor is not obstructed.
How do I mount the camera on a tree?
Use the adjustable strap to secure the camera around a tree trunk at desired height. Alternatively, use the included stake for ground mounting.
Can I use rechargeable batteries?
Yes, but NiMH rechargeable AA batteries are recommended for best performance. Avoid mixing rechargeable and non-rechargeable batteries.
How do I view photos and videos?
Remove the SD card and insert it into a computer using a card reader, or use an optional viewer cable if supported.
What is the trigger speed and how do I adjust it?
The trigger speed is approximately 0.3 seconds. You can adjust PIR sensitivity in the menu for longer or shorter detection range.
How do I reset the camera to factory settings?
Go to the menu and select 'Factory Reset' or remove batteries and SD card, wait 5 minutes, then reinsert. Refer to manual for exact steps.
What is the waterproof rating and can it be left in rain?
It has IPX4 splash-proof rating, meaning it can withstand rain splashes. However, it is not submersible. Avoid prolonged exposure to heavy rain.
User questions about TrailScout 119937 BUSHNELL
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual TrailScout 119937 - BUSHNELL and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. TrailScout 119937 by BUSHNELL.