CRP9BK - Radio BLAUPUNKT - Free user manual and instructions

Product Type	Portable Radio
Brand	Blaupunkt
Model	CRP9BK
Color	Black
Power Source	AC 230V ~50Hz or 4x UM-2 (C) batteries (not included)
Battery Type	C/LR14 (not supplied)
Dimensions (W x H x D)	Approx. 290 x 150 x 90 mm
Weight	Approx. 1.2 kg (without batteries)
Radio Bands	FM (87.5-108 MHz), AM (520-1710 kHz)
Display	LCD digital display with backlight
Alarm Function	Dual alarm with radio or buzzer
Sleep Timer	Programmable sleep timer (max 90 min)
Audio Output	Built-in speaker (3W), headphone jack (3.5mm)
Tuning	Manual/automatic tuning with 20 station presets
Antenna	Built-in ferrite bar for AM, telescopic rod for FM
Clock	24-hour format with time setting and backup
Safety Instructions	Do not expose to moisture; use only supplied adapter
Cleaning	Wipe with a soft dry cloth; do not use solvents
Battery Replacement	When display dims or radio fails to operate

Frequently Asked Questions - CRP9BK BLAUPUNKT

How do I set the clock on the Blaupunkt CRP9BK?

Press and hold the CLOCK button for 2 seconds. Use the TUNING knob to set hours, then press CLOCK again to set minutes. Confirm with CLOCK.

Can I wake up to the radio?

Yes, set the alarm by pressing ALARM and choose RADIO as the wake source. Adjust the volume with the VOLUME knob.

What type of batteries does the CRP9BK use?

It requires 4 x C (LR14) batteries. They are not included and should be inserted with correct polarity.

Why is there no sound from the radio?

Check if the VOLUME is turned up, ensure the radio is tuned to a station, and verify the antenna is extended. If using batteries, they may be depleted.

How do I store radio stations presets?

Tune to the desired station, press and hold a preset number button (1-5) for 2 seconds until a beep sounds. Repeat for other stations.

Does the radio have a headphone jack?

Yes, there is a 3.5mm HEADPHONE jack on the side. Inserting headphones disables the built-in speaker.

How do I adjust the sleep timer?

Press the SLEEP button repeatedly to select a duration (15, 30, 45, 60, or 90 minutes). The radio will turn off automatically.

What should I do if the display is blank?

Ensure the power cord is plugged in securely or replace the batteries. If using AC power, check the wall outlet. The display may also have a backlight that dims automatically.

How do I clean the radio?

Unplug the radio and wipe the exterior with a soft, dry cloth. Do not use abrasive cleaners or liquids, as they may damage the surface.

Is there a battery backup for the clock?

Yes, when using AC power, the batteries act as backup to retain time and alarm settings during a power outage.

USER MANUAL CRP9BK BLAUPUNKT

Enjoy it.

• This safety and operating instruction should be retained for future reference. - The apparatus should not be exposed to dripping or splashing or placed in a humid atmosphere such as a bathroom. - Do not install the product in the following areas: - Places exposed to direct sunlight or close to radiators. - On top of other stereo equipment that radiate too much heat. - Blocking ventilation or in a dusty area. - Areas where there is constant vibration. • Humid or moist places. - Do not place near candles or other naked flames. - Operate the product only as instructed in this manual. - Before turning on the power for the first time, make sure the power adaptor is properly connected.

For safety reasons, do not remove any covers or attempt to gain access to the inside of the product. Refer any servicing to qualified personnel.

Do not attempt to remove any screws, or open the casing of the unit; there are no user serviceable parts inside. Refer all servicing to qualified service personnel.

SAFETY INSTRUCTIONS

1. Read Instructions - All the safety and operating instructions must be read before the product is operated.
2. Retain Instructions - The safety and operating instructions should be kept with the product for future reference.
3. Heed warnings - All warnings on the product and in the operating instructions should be adhered to.
4. Follow instructions - All operating and users' instructions should be followed.
5. Water and moisture - To reduce the risk of fire or electric shock, do not expose the product to train, dripping, splashing or excessive moisture such as in a sauna or bathroom. Do not use this product near water, for example, near a bathtub, washbowl, kitchen sink, laundry tub, in a wet basement or near a swimming pool (or similar).
6. Object and Liquid Entry - Never push objects of any kind into this product through openings, as they may touch dangerous voltage points or short-circuit parts that could result in a fire or electric shock. Never spill liquid of any kind on the product. Do not place any object containing liquid on top of the product.
7. Servicing - Do not attempt to service this product yourself, as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.
8. Replacement parts - When replacement parts are required, ensure that the service technician has used replacement parts specified by the manufacturer or have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock or other hazards.
9. Place your clock radio on a stable surface, away from sources of direct sunlight or excessive heat or moisture.
10. Protect your furniture when placing your units on a natural wood and lacquered finish by using a cloth or protective material between it and the furniture.
11. Clean your unit with a soft cloth moistened only with mild soap and water. Stronger agents

such as benzene, thinner or similar materials can damage the surface of the unit. Make sure the unit is unplugged before cleaning.

12. Battery

1) The batteries must not be exposed to excessive heat such as sunshine, fire or the like.

2) The batteries should be drawn to the environmental aspects of battery disposal.

3) Battery usage CAUTION - to prevent battery leakage which may result in body injuries, property damage, or damage to the apparatus:

- Install all batteries correctly, + and - as marked on the apparatus.

- Remove batteries when the unit is not used for a long time.

WARNING

This appliance is not intended for use by persons (including children) with reduced physical sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.

Children should be supervised to ensure that they do not play with the appliance.

1. The apparatus must not be exposed to dripping or splashing and that objects filled with liquids, such as vases, must not be placed on the apparatus.
2. To prevent fire or shock hazard, do not expose this equipment to hot places, rain, moisture or dust.
3. Do not locate this unit near any water sources e.g. taps, bathtubs, washing machines or swimming pools. Ensure that you place the unit on a dry, stable surface.
4. Do not place this unit close to a strong magnetic field.
5. Do not place the unit on an amplifier or receiver.
6. Do not place this unit in a damp area as the moisture will affect the life of electric components.
7. If the clock is brought directly from a cold to a warm location, or is placed in a very damp room, moisture may condense on the lens inside the player. If this occurs, the system will not operate properly. Please leave the system turned on for about an hour until the moisture evaporates.
8. Do not attempt to clean the unit with chemical solvents as this might damage the finish. Wipe with a clean, dry or slightly damp cloth.

NOTICE

This product complies with the radio interference requirements of the European community.

Your product is designed and manufactured with high quality materials and components, which can be recycled and reused.

When this crossed-out wheeled bin symbol is attached to a product it means that the product is covered by the European Directive 2002/96/EC. Please inform yourself about the local separate collection system for electrical and electronic products. Please act according to your local rules and do not dispose of your old products with your normal household waste. Correct disposal of your old product helps to prevent potential negative consequences for the environment and human health.

Your product contains batteries covered by the European Directive 2006/66/EC, which cannot be disposed of with normal household waste. Please inform yourself about the local rules on separate collection of batteries because correct disposal helps to prevent negative consequences for the environment and human health.

Environmental information

All unnecessary packaging has been omitted. We have tried to make the packaging easy to separate into three materials: cardboard (box), polystyrene foam (buffer) and polyethylene (bags, protective foam sheet). Your system consists of material which can be recycled and reused if disassembled by a specialized company. Please observe the local regulations regarding the disposal of packaging materials, exhausted batteries and old equipment.

Recording and playback of material might require consent. See Copyright Act 1956 and The Performer's Protection Acts 1958 to 1972.

Thank you for your purchase of this large digit clock radio with projection. Please read these instructions carefully and keep the manual for future reference.

INSTALLATION

Plug in the AC/DC adaptor to an AC household outlet, and then plug the DC jack to the back of the unit. Your unit is ready to work for you.

BACKUP BATTERY INSTALLATION

Your clock requires 2 x new AAA batteries (not included) to provide backup power to it in the event of a temporary power interruption.

1. Place your clock face down on a flat and soft surface.
2. Slide and remove the battery cover at the back of your unit.
3. Insert 2 x new AAA batteries into the battery compartment by observing the correct "+" and "-" polarity.
4. Slide and replace the battery cover.

Remarks:

• Do not mix old and new batteries. • Do not mix alkaline, standard, or rechargeable batteries. Alkaline batteries are recommended for optimal usage of this clock. If the unit is not to be used for a prolonged period, such as a month or longer, remove the batteries to prevent possible corrosion. Should the battery compartment become corroded or dirty, clean the compartment thoroughly and replace the batteries.

If AC power is interrupted and backup batteries are being used: the projection, radio, always-on backlight function will disable. The time and all settings of your unit will be kept and wake-to-radio alarm will be replaced by wake-to-buzzer alarm.

TO SET TIME, 12/24-HR TIME, CALENDAR AND SNOOZE DURATION

1. Press and hold SET/ AL SET, the hour digits flash. Press on to set the hours. Press and hold ▲ or ▼ will accelerate setting at high speed.
2. Press SET/ AL SET once again, the minute digits flash. Press or to set the minutes. Press and hold ▲ or ▼ will accelerate setting at high speed.
3. Press SET / AL SET once again: 24Hr flash, press to select 12Hr 24Hr. In 12Hr mode, PM will appear on the display to indicate afternoon time. There is no AM indicator.
4. Press SET/ AL SET once again, the year 2015 flash. Press on to set to the current year.
5. Press SET/ AL SET once again, the month digits flash. Press or to set to the current month.
6. Press SET/ AL SET once again, the date digits flash. Press or ▲ t▼set to the current date.
7. Press SET/ AL SET once again, 05 flash. Press or to set the snooze duration (from 5 min to 60 min.).
8. Press SET/ AL SET again to complete set-up. If no key is pressed in approximate 10 seconds at any time during set-up, the clock will exit the set-up mode. Remark: the calendar must be set correctly to current date / month / year to enable the weekdays / weekends alarm work properly.

TO SET ALARM 1

1. At normal time display, press SET / AL SET once, default alarm time 6:00 and A1 appear.
2. Press and hold SET/AL SET until the hour digits flash. Press or to set the desired hour. Press and hold ▲ or ▼ to accelerate setting at high speed. PM will appear on the display to indicate afternoon time if 12-Hr format is selected. There is no AM indicator.
3. Press SET/AL SET once again, the minute digits flash. Press or to set desired minutes. Press and hold ▲ or ▼ to accelerate setting at high speed.
4. Press SET/AL SET once again, LCD displays "bu" (buzzer), Press or ▲ to ▼ elect the wake-up sound sources :-

bu = Buzzer

rd = Radio

1. Press SET/AL SET once again, "1-7" flashes, Press ▲ or ▼ to select "6-7" or "1-5" or "1-1". 1-5 = Monday to Friday (alarm by working day) 6-7 = Saturday and Sunday (alarm by weekend). 1-7 = Monday to Sunday (alarm by weekly). 1-1 = alarm by single day, after stopped the alarm, user need press AL 1.2/ON.OFF once to re-active another single day alarm.
2. Press SET/AL SET again to complete set-up. If no key is pressed in approximate 10 seconds at any time during set-up, the clock will exit the alarm set-up mode.

TO SET ALARM 2

At normal time display, press SET/AL SET twice, default alarm time 6:00 and A2 appear, and reference alarm setting procedure for the rest operation.

TO TURN ON / OFF ALARM 1 AND 2

1. Press AL 1.2/ON.OFF once to activate Alarm 1, 📋 appears.
2. Press once again to activate Alarm 2, ② appears.
3. Press once again to activate both Alarm 1 and 2. Both 📁 and 🔒 appear.
4. Press once again to deactivate both alarms; icons disappear.

TO STOP AND RESET THE ALARM TO COME ON THE NEXT DAY

When alarm 1 or 2 is sounding, the related alarm icon flashes. Press the AL 1.2/ON.OFF once to stop the alarm and reset it to come on the following day. After that both 📋 and/or 🌐 remain on the display. The alarm volume will increase gradually in 3 levels.

TO ACTIVATE THE SNOOZE FUNCTION (default snooze duration is 5 minutes)

When alarm is sounding, press z₁ · 0 once, the alarm will be silenced and come on again after the set snooze duration.

Note: if your second alarm activates while the first alarm is sounding or it is in the snooze mode, the second alarm

overrides the first alarm (the first alarm is reset to come on the next day).

TO SET UP THE FM ANTENNA

Extend the FM wire antenna fully and vary the direction for best FM reception. Do not strip, alter or attach to other antennas.

TO LISTEN TO THE FM RADIO

1. To turn on the radio, press RADIO/SLEEP once, the display shows "rd" and then the radio frequency readings "87.5" in MHz.
2. Press ▲/▼ to tune the radio to a desired station. Press and hold ▲ to scan for the next clear station.
3. To adjust the volume, press VOL once. The display shows "L10". Press ▲ or ▼ to adjust the volume from L00 (no sound) to L15 (maximum). Press VOL to store the volume setting.
4. Press Z• once to turn off the radio.

Remark: Keep your radio away from fluorescent lamps or other electronic devices, which may cause interference to the radio. For better reception, try moving the unit near a window or adjust the antenna for a better signal.

TO USE THE PRESET MEMORY OF RADIO

This clock radio features a total of 10 preset memories for FM stations. These allow you to preset your favorite stations and access them quickly.

1. Turn on the radio and select a radio station you like to memorize.
2. Press and hold SET until "MEM" appears and "01" flashes. Press SET/AL SET once to store Memory 1.
3. Press ▲ or ▼ to select another station you like to memorize. Then press and hold SET/AL SET until "MEM" appears and "01" flashes. Press ▲ or ▼ to select "02", then press SET/AL SET once to store Memory 02.
4. Repeat Steps 2 to 3 to preset memories 3 through 10.
5. To access a preset station at any time, press SET/AL SET once while the radio is on.
6. To edit a preset station, select another station and then repeat Steps 2 to 4. This overrides the original settings.

TO USE THE SLEEP TIMER

1. When the radio is playing, press and hold RADIO/SLEEP to enter sleep mode. The SLEEP indicator and the sleep time "05" (5 minutes) appear on the display.
2. Press RADIO/SLEEP again as needed to adjust the sleep timer from 5, 10, 15, 30, 45, 60, 75, 90, 120, or OFF.
3. When the display reverts to time display, press and hold RADIO/SLEEP once to show the sleep time remaining.
4. The radio will remain active for the programmed sleep time and then shut off automatically.
5. To turn off the radio before the sleep time has elapsed, press z_z · once.

TO USE THE PROJECTION (operated with the AC/DC adaptor only)

1. Press once to turn on the projection.
2. Press ▶ once again to activate auto scrolling function to view the current Indoor temperature (rounded to the nearest digit) and the current time for 5 seconds alternately. Press ▼/C/F to select degree Celsius or degree Fahrenheit temperature readout in projection view.
3. Press once again to turn off the projection.
4. When the projection is on, press and hold ☑ to flip the projection view upside down. At the right side of the projector, use the rotary knob to rotate the projected time by around 90 degrees.

TO USE THE HI-LO-OFF DIMMER OF THE LCD BACKLIGHT

Simply press Zz• once to adjust the brightness (Hi/Lo/Off) of the LCD backlight. This can only be done when the adaptor is being used to power the clock radio.

Remarks: if only the backup batteries are being used to power the clock radio, press once to activate the backlight for 5 seconds and then it will go off again.

TO USE AUTO DIM BACKLIGHT

You can program your clock radio to automatically dim down the backlight for 5-12 hours everyday.

1. At normal time display mode, press and hold z_z · , until the display shows and "OFF" flashes. Press or to select "ON" to activate the auto dim backlight function.
2. Pressz once, "0:00" flash, press ▲ or ▼ to set auto dim starting hours.
3. Pressz once, 9Hr flash, press ▲ or ▼ to set auto dim duration from 5Hr to 12Hr.
4. Press Zr• once to complete the setting. ✿ remains static on the LCD display. If no key is pressed for approximately 10 seconds at any time during set-up, the clock radio will revert to normal time display.

Remarks:

1. When the auto dim function is activated, pressing the button can select the backlight manually. The auto dim function will be activated automatically again at the same time the next day.
2. The Auto Dim function only works when the AC/DC adaptor is being used to power your clock radio. It does not work when it is powered by the backup batteries only.
3. To completely turn off the Auto Dim function, repeat Step 1 above and select OFF. The icon disappears on the LCD.

TO DISPLAY TEMPERATURE IN DEGREE °C OR °F

Simply press / C/F to display temperature in degree °C or in degree °F.

TO CHARGE MOBILE PHONE WITH THE USB PORT (5V/1A)

Connect the charging cable of your mobile phone to the A-type USB port at the back of the unit, then connect the other end to your mobile phone. The clock radio will charge the mobile phone automatically.

Remarks:

1. Make sure to use the original charging cable of your mobile phone for charging.
2. Make sure the original adaptor enclosed with your clock radio (5V 1.2A) is being used to power your clock radio. Using other adaptors may not charge your phone.
3. iPad and Notepad charging is not applicable.

TROUBLESHOOTING

If your clock displays irrelevant time or does not function properly, which may be caused by electro-static discharge or other interference, unplug the DC jack at the back of the unit, slide open the battery cover, and take out the batteries. Then re-plug the DC jack and reinstall the batteries by observing the correct +/- polarity. Your unit will be reset to default settings and you will need to set it again.

SPECIFICATIONS

Power supply:	DC IN, 5V/1.2A.
USB output rating:	5V/1A.
FM frequency:	87.5~108MHz.
Output power in RMS:	0.3W
Power consumption:	6W
Standby power consumption:	< 0.5W

Default settings:

Alarm duration	1 Hour
Snooze duration	5 to 60 minutes
Auto Dim	5Hr to 12Hr
Time	24Hr format
Calendar	Jan 1, 2015
Alarm 1 and 2	6:00 (1-7 / OFF)
Snooze duration	05 (5 minutes)
Auto Dim	9 HR (OFF)
Temperature	°C

BLAUPUNKT

Competence Center Audio 2N-Everpol Sp.z o.o.

Competence Center Audio

2N-Everpol Sp.z o.o.

In case of questions or problems

please contact our service.

Tel.[phone]

E-mail: [e-mail]

Competence Center Audio

2N-Everpol Sp.z o.o.

In case of questions or problems

please contact our service.

Tel.[phone]

E-mail: [e-mail]

IMPORTANT NOTES

Competence Center Audio

2N-Everpol Sp.z o.o.

In case of questions or problems

please contact our service.

Tel. [phone]

E-mail: [e-mail]

IMPORTANT NOTES

INSERTING THE BACKUP BATTERY

Competence Center Audio 2N-Everpol Sp.z o.o.

Competence Centre Audio

2N-Everpol Sp. Z o.o.

ul. Puławska 403A

02-801 Warsaw, Poland

phone: [phone]

e-mail: [e-mail]

www.blaupunkt.com

In case of questions or problems please contact our service.

Tel. [phone]

E-mail: [e-mail]

All rights reserved. All brand names are registered trademarks of their respective owners. Specifications are subject to change without prior notice.

Enjoy it.