SFA 30 C1 - Built-in kit SILVERCREST - Free user manual and instructions

Product Type	Built-in Kit
Brand	SilverCrest
Model	SFA 30 C1
Suitable For	Built-in ovens, microwaves, or other compatible appliances
Dimensions (W x H x D)	Approximately 595 x 570 x 545 mm
Weight	Approximately 5 kg
Material	Stainless steel or painted steel
Color	Silver or black
Mounting Type	Flush-mount, recessed installation
Included Accessories	Screws, mounting brackets, installation template, user manual
Installation Requirements	Requires a suitable cutout in cabinetry; ensure proper ventilation
Safety Features	Anti-tilt brackets, secure locking mechanism, heat-resistant materials
Cleaning Instructions	Wipe with a damp cloth; avoid abrasive cleaners
Maintenance	Check screws periodically; tighten if necessary
Warranty	2 years (standard SilverCrest warranty)
Compliance	CE, RoHS
Repairability	Spare parts available from SilverCrest service centers
Package Contents	1 built-in kit, 1 set of mounting hardware, 1 instruction manual
Country of Origin	China

Frequently Asked Questions - SFA 30 C1 SILVERCREST

What is the SilverCrest SFA 30 C1 built-in kit used for?

The SFA 30 C1 is a built-in kit designed to install compatible SilverCrest built-in ovens, microwaves, or other similar appliances flush into kitchen cabinetry for a seamless look.

Is the SFA 30 C1 compatible with all SilverCrest built-in appliances?

The kit is designed for specific models. Check the product dimensions and compatibility list in the user manual to ensure a proper fit.

What are the dimensions of the built-in kit?

The external dimensions are approximately 595 mm wide, 570 mm high, and 545 mm deep. The cutout size must be slightly smaller (refer to the installation template).

Does the kit include all necessary installation hardware?

Yes, the SFA 30 C1 comes with screws, mounting brackets, and an installation template. You may need additional tools (screwdriver, drill) for installation.

Can I install the built-in kit myself?

Installation is straightforward for DIY enthusiasts with basic tools. However, for electrical or gas appliances, professional installation is recommended to ensure safety and compliance.

How do I clean the built-in kit?

Clean the kit with a soft damp cloth and mild detergent. Avoid abrasive cleaners or scouring pads that may damage the finish.

Is the built-in kit safe to use?

Yes, when installed correctly. The kit includes anti-tilt brackets and is made from heat-resistant materials. Always follow the installation instructions to prevent accidents.

What is the warranty period for the SFA 30 C1?

SilverCrest offers a 2-year warranty against manufacturing defects. Proof of purchase is required for warranty claims.

Where can I find the user manual?

The user manual is included in the package and also available for free download in PDF format from the SilverCrest website or notice-facile.com.

Are replacement parts available for the SFA 30 C1?

Yes, spare parts such as screws, brackets, and templates can be ordered from SilverCrest customer service or authorized service centers.

USER MANUAL SFA 30 C1 SILVERCREST

User manual and service information

公告

•

C2

Information about trademarks....4
Introduction......4
Intended use 4
Supplied items....5
Control elements 6
Technical data 7

SilverCrest SFA 30 C1 hands-free kit....7

Car charger adapter SDC8311....7

Rating plate 8

Safety instructions....8
Copyright 12
Prior to use....12
First use 12

Inserting the lithium-ion battery 13

Charging the lithium-ion battery....14

Switching on/off the hands-free kit....14

Connect to compatible mobile phones....15

Making calls....16

Calling via voice dialling....16

Accept / reject calls....17

Volume setting 18

Muting microphone....18

Ending call....18

Redialling....18

Mounting on the sun visor 19

Storage when not in use....19

LED indicator....20

Cleaning / maintenance....21

Maintenance 21

Cleaning 21

Troubleshooting 22

Environmental and disposal information 23

Conformity information 24

Warranty and servicing advice....25

Information about trademarks

The Bluetooth ^® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by TARGA GmbH is under license.

USB is a registered trademark.

Other names and products may be the trademarks or registered trademarks of their respective owners.

Introduction

Thank you for purchasing a SilverCrest product.

The SilverCrest Bluetooth ^® 3.0 SFA 30 C1 hands-free kit, hereinafter referred to as hands-free kit, enables you to conveniently use your mobile phone in hands-free mode. Power is supplied via a 12V/24V car power outlet or via the integrated battery.

Intended use

This hands-free kit is an electronic communications device. It allows you to make or answer driving, without having to hold your mobile phone. This hands-free kit is not designed for commercial use or operation in a company. Use the hands-free kit only for private purposes as any other use is not as intended. This hands-free kit meets all relevant standards and directives. In the event of any modification to the hands-free kit that was not approved by the manufacturer, compliance with these standards is no longer guaranteed. The manufacturer does not accept any liability for any resulting damage or faults in such cases.

Please observe the regulations and laws in the country of use.

Supplied items

Remove the device and all the accessories from the packaging. Remove the packaging material and check whether all the parts are complete and undamaged. In the case that you find anything missing or damaged, please contact the manufacturer.

1. SilverCrest Bluetooth ^® 3.0 SFA 30 C1 hands-free kit
2. Lithium-ion battery BL-5B, 3.7V/700mAh
3. Car charger adapter SDC8311
4. Mounting clip
5. These instructions (symbolic representation)

Control elements

These instructions have a fold-out cover. The hands-free kit is illustrated with numbers on the inside cover. The numbers indicate the following:

1 Mute button (microphone muting)
2 Multifunction button (on/off, answer/end call, connect)
3 Microphone
4 LED indicator
5 + button (increase volume, redial)
6 - button (reduce volume)
7 USB charging socket
8 Loudspeaker
9 Battery compartment
10 Mounting bracket for retaining clip

Technical data

SilverCrest SFA 30 C1 hands-free kit

Operating voltage: 5V

Battery: li-ion battery BL-5B; Shen Zhen Xin Hong Xing Energy Technology CO.,

LTD; 3.7V/700mAh/2.59Wh

Bluetooth ^® specification: V3.0 + EDR

Profile support: BT headset, hands-free profile

Frequency range: 2.402 to 2.480GHz

Charging time: max. 3 hours

Talk time: up to 6 hours

Standby time: up to 600 hours

Dimensions (W x H x D): approx. 118 x 47 x 17mm

Weight: approx. 76 g

Operating temperature: 0°C to +45°C

Storage temperature: -20^ to +60^

Car charger adapter SDC8311

Fuse: T2A L 250V

Input voltage: 12-24V

Output voltage: 5V

Input current:: 370mA

Output current:

500mA

Rating plate

The rating plate can be found in the battery compartment (9) of the hands-free kit.

The technical data and design may be changed without notification.

Safety instructions

Before using the hands-free kit for the first time, read the following instructions and pay attention to all warnings, even if you are familiar with handling electronic devices. Store these instructions in a safe place for future reference. If you sell the hands-free kit or pass it on, always include these instructions. They are an integral part of the hands-free kit.

Explanation of the symbols used in these instructions

Three warning symbols: triangular warning triangle, black exclamation mark, and lightbulb icon (no text or labels)

DANGER! This symbol together with the word 'DANGER' indicates an impending dangerous situation which, if not prevented, can lead to serious injuries or even death.

WARNING! This symbol together with the word 'WARNING' indicates important information for the safe operation of the device and user safety.

This symbol indicates other important information on the topic.

DANGER! This hands-free kit can be used by children aged 8 and older and by persons with reduced physical, sensory or mental abilities or lack of experience and knowledge if they are supervised or have been instructed on the safe use of the hands-free kit and understand the resulting risks. Children must not play with the hands-free kit. Cleaning and user maintenance must not be carried out by children without supervision.

Always keep plastic packaging away from children. It poses a suffocation risk!

DANGER! If smoke is produced, or there are any unusual sounds or smells, disconnect the hands-free kit from the power supply immediately and remove the battery. In such cases, the hands-free kit should not be used until it has been inspected by authorised service personnel. Never inhale smoke from a potential device fire. If you have inhaled smoke, however, consult a doctor. The inhalation of smoke can be harmful.

WARNING! The hands-free kit and its accessories must not become damaged in order to prevent hazards. The hands-free kit must not be used if it is damaged.

DANGER! Ensure that no fire sources (e.g. burning candles) are placed on or near the hands-free kit. It poses a fire hazard!

WARNING! Please note that the permissible operating and storage conditions may be exceeded or may not be achieved in the car. The device may be damaged!

WARNING! The hands-free kit must never be exposed to any direct heat sources (for example, heaters) or direct sunlight or artificial light. Also avoid contact with dripping water and splashes and corrosive liquids. Do not use the hands-free kit near water. In particular, the hands-free kit should never be submerged in liquid and do not

place any items filled with liquid, for example, vases or drinks, near the hands-free kit. Also ensure that the hands-free kit is never subjected to excessive shocks and vibrations. Furthermore, no foreign objects may penetrate the device. Otherwise, the hands-free kit could be damaged.

DANGER! Road safety always comes first! The current traffic situation always takes precedence over the operation of the hands-free kit. Mount the hands-free kit ideally on the sun visor in your vehicle so that it does not obstruct you when driving. The hand-free kit must never be mounted in the inflation range of an air bag.

WARNING! Please bear in mind that wirelessly transmitted data can be intercepted by unauthorised third parties.

DANGER! In the event of improper use of the battery, there is a risk of explosion and leakage. Only replace the battery with an identical model or one recommended by the manufacturer. Never replace the battery in an environment where there is a risk of explosion. During the insertion or removal of the battery, there might be a spark that could cause an explosion. Areas where there is an explosion risk are usually labelled as such, although not always clearly. This includes tank areas such as below deck on boats, refuelling or fuel storage areas, areas in which the air contains chemicals or particles such as e.g. cereals, dust or metallic powder as well as in all areas in which you are normally instructed to switch off your engine.

DANGER! The battery must not be thrown into fire. It poses a risk of explosion.

DANGER! The terminals of the battery must not be short-circuited. The battery must not be opened, damaged or deformed. It poses a risk of explosion.

DANGER! There is a risk of suffocation if you swallow the battery.

DANGER! The hands-free kit may only be operated with a li-ion battery type BL-5B of the manufacturer Shen Zhen Xin Hong Xing Energy Technology CO., LTD. There is a risk of fire and explosion otherwise.

Car charger adapter

WARNING! Always handle the car charger adapter by the connector and do not pull on the connection cable.

WARNING! Do not place furniture or other heavy objects on the connection cable and ensure that it is not kinked.

DANGER! The connection cable must be laid in such a manner that it does not obstruct you when driving the vehicle. The connection cable must not be laid in the inflation range of the air bag since it could cause serious injuries otherwise if the air bag inflated.

DANGER! Do not use adapter plugs or extension cables and do not make any alterations to the connection cable. If the connection cable is damaged, it must be replaced by the manufacturer or its customer service representative or a similarly qualified person to prevent any safety hazards. Remove the car charger adapter from the car power socket.

Copyright

All information contained in these instructions is subject to copyright and is provided for information purposes only. It is only permitted to copy or duplicate data and information with the express and written consent of the author. This also includes commercial use of the content and data. The text and illustrations are based on the state of the art at the time of printing. Subject to change.

Prior to use

Remove the hands-free kit and the accessories from the packaging. Check the contents to ensure they are complete.

Check the hands-free kit and the accessories for signs of damage. The hands-free kit must not be used if it is damaged.

First use

Before you use the hands-free kit for the first time, please insert the enclosed lithium-ion battery and charge it fully.

WARNING! Please remove the car charger adapter when the engine is switched off to save the battery of your vehicle.

Inserting the lithium-ion battery

Open the battery compartment (9) by pressing the centre of the battery compartment cover and removing it in the direction of the imprinted arrow. Insert the lithium-ion battery in the battery compartment (9) as shown in the illustration. Due to its design, it is not possible to insert the battery incorrectly. After inserting the battery, close the battery compartment (9) with the battery compartment cover.

Charging the lithium-ion battery

Charge the lithium-ion battery fully before its first use. To do so, connect the USB connector of the enclosed car charger adapter to the USB charging socket (7) of the hands-free kit. Then insert the car charger adapter into an appropriate power outlet of your vehicle. The LED indicator (4) lights up orange while charging. A full charge cycle takes approximately 3 hours. If charging is complete, the LED indicator (4) goes out. Then disconnect the car charger adapter from the power outlet and the hands-free kit.

WARNING! Charge the battery only when the engine is running to save the battery of your vehicle.

Alternatively, you can also charge the battery via a PC or an external power supply. A connection cable and an appropriate mini-USB connector are required for this purpose.

Switching on/off the hands-free kit

Press the multifunction button (2) for approx. 4 seconds until a beep sounds and the LED indicator (4) flashes blue. The hands-free kit is now ready to use.

To switch off the hands-free kit, press the multifunction button (2) again for approx. 3 seconds. A beep sounds, the LED indicator (4) flashes orange briefly several times and then goes out completely.

Connect to compatible mobile phones

Pairing

With the hands-free kit switched off, keep the multifunction button (2) pressed for approx. 9 seconds until a beep sounds and the LED indicator (4) alternates between flashing orange and blue. The hands-free kit is now in search mode. Activate the Bluetooth® function of your mobile phone and let it search for Bluetooth® devices nearby. For further details, please read the instructions of your mobile phone. Select the device "SFA 30 C1" from the list of devices which are found.

If you are asked for a PIN during the pairing process, enter "0000".

The name of the hands-free kit "SFA 30 C1" now appears in the list of devices connected to your mobile phone. The hands-free kit is now in standby mode and the LED indicator (4) flashes blue once briefly at regular intervals. Once the device is disconnected, it flashes blue twice.

You can connect or pair additional devices to the hands-free kit in the same manner. The pairing begins for each device with the hands-free kit switched off as described above.

The hands-free kit then has several "known" devices. This status is a prerequisite for an active connection between the hands-free kit and other devices. A maximum of 3 devices can be saved as "known devices".

The number of devices that can be actively connected to the hands-free kit is limited to two. As soon as one or two of the known devices are in the vicinity of the hands-free kit, the connection to these devices is established automatically. You may need to confirm the connection on your mobile phone. If a third known device now comes in the vicinity of

the hands-free kit, the connection to it is blocked until one of the two active connections is interrupted or one of the two devices leaves the transmission range. If one of the two active connected devices is no longer paired, pairing is possible for the third (waiting) device.

The pairing process can take up to 30 seconds depending on the mobile phone which is used.

If two devices are connected to the hands-free kit, different ring tones will be used for incoming calls.

Making calls

If you want to make a call, dial the phone number as usual on your mobile phone. The LED indicator (4) rapidly flashes blue when the telephone connection is established. Once the telephone connection is established, the LED indicator (4) flashes blue once followed by a long pause.

Calling via voice dialling

The hands-free kit provides the option of making calls via voice dialling if your mobile phone supports this function and it is enabled. To establish a connection via voice dialling, press the multifunction button (2) of the hands-free kit once briefly in standby mode and then clearly say the name of the desired participant. For more detailed information on the voice dialling function of your mobile phone, please refer to the instructions of the mobile phone.

Accept / reject calls

• The hands-free kit rings for an incoming call. The LED indicator (4) rapidly flashes blue when the telephone connection is established. Answer the call by briefly pressing the multifunction button (2). Once the telephone connection is established, the LED indicator (4) flashes blue once followed by a long pause. If the multifunction button (2) is pressed for approx. two seconds, the call can be transferred to the mobile phone. The call can then also be subsequently retrieved in the same manner.
  • To reject the call, press the multifunction button (2) for approx. 2 seconds until a beep sounds.

If two mobile phones are connected to the hands-free kit at the same time and a call is already being taken via the hand-free kit, a call to the second mobile phone is handled as follows: the second call is transferred to the hands-free kit as soon as it is accepted on the mobile phone. The first call is put on hold until the second call has finished. Then the first call can be continued via the hands-free kit.

Volume setting

You can increase the volume according to your needs during a call with the + button (5). A beep sounds if the maximum volume is reached. You can also reduce the volume with the - button (6). A beep sounds if the minimum volume is reached.

Muting microphone

You can use the mute button (1) to temporarily switch off the microphone (3) during a call so that the other person can no longer hear you. In this case, press the mute button (1) for approx. 2 seconds until a confirmation tone sounds and the LED indicator (4) flashes orange once. The microphone is now muted. When muted, 2 beeps sound at regular intervals to remind you of the muting. If you want to end the muting, press the mute button (1) again for approx. 2 seconds. A beep sounds and you are back in normal talk mode in which the other person can hear you.

Ending call

To end a call, press the multifunction button (2) once briefly. You will hear a confirmation tone when you release the button.

Redialling

You can redial the last number that was called via the hands-free kit. In this case, press the + button (5) for approx. 2 seconds in standby mode until a confirmation tone sounds.

Mounting on the sun visor

You can mount the hands-free kit on the sun visor of your vehicle by means of the enclosed mounting clip. To do so, first attach the mounting clip to the clip fixing (10) on the back of your hands-free kit.

Pure diagram of a mechanical component with no text, numbers, or symbols visible

You can now easily attach the hands-free kit to the sun visor of your vehicle.

WARNING! The hands-free kit must be attached in such a manner that your vision is not impeded.

Storage when not in use

You should recharge the battery at regular intervals if you do not use the device for a prolonged period of time. This will maintain the performance of the battery. Store the device in a dry, clean and cool location.

LED indicator

Refer to the table below for the different statuses of the LED indicator (4):

Status of LED indicator (4) Meaning
flashes blue 5 times power-on procedure
alternates between flashing orange and blue Pairing
flashes blue twice every 3 seconds	standby ^® connection not established)
flashes blue once every 4 seconds standby mode (Bluetooth)	^® connection established) and during an active call.
rapidly flashes blue (a ringtone also sounds for an incoming call)	incoming or outgoing call
flashes orange once (2 beeps sound at regular intervals)	muting of the microphone is active
lights up orange continuously charging (after charging is complete, the LED goes out)
flashes orange once in conjunction with a beep	the hands-free kit is not connected to the car power supply via the car charger adapter and the battery status is low
flashes orange 5 times power-off procedure

(Blue

Cleaning / maintenance

Maintenance

DANGER! It is necessary to repair the hands-free kit if it has been damaged in any way, for example, if the housing is damaged, if liquid or objects have penetrated the hands-free kit or if it has been exposed to rain or moisture. Repairs are also required if the hands-free kit is not working properly or has been dropped. If you notice any smoke, unusual noises or strange odours, remove the car charger adapter immediately from the socket and remove the battery. In such cases, the hands-free kit should not be used until it has been inspected by authorised service personnel. Only have the device repaired by qualified personnel. Never open the housing of the hands-free kit. Furthermore, the hands-free kit could be damaged upon opening and this would void your warranty.

Cleaning

WARNING! Disconnect the hands-free kit from the power supply before cleaning in order to prevent hazards. Use a dry cloth for cleaning and never use any solvent or cleaner that would corrode the plastic materials. Ensure that no liquid can penetrate the housing. Use a slightly damp cloth for more stubborn dirt.

Troubleshooting

All aforementioned functions depend on the functionality of the mobile phone which is used. It is possible that some functions may not be supported.

The hands-free kit is not working.

• Check whether the lithium-ion battery is charged. Charge it if necessary.
• Check whether the hands-free kit is switched on and the connection to the mobile phone is established.

The lithium-ion battery is not charged.

• Check whether the car charge adapter is inserted correctly in the power outlet.
• Check whether the USB connector of the car charger adapter is inserted correctly in the USB charging socket (7) of the hands-free kit.
• Turn on the ignition of your vehicle because some vehicles supply power to the power outlet only when the ignition is turned on.

- Check whether the car charger adapter's fuse is faulty and replace it if necessary. To do so remove the adapter's contact closure by turning it anti-clockwise. Replace the faulty fuse with a new one of the same type (see technical data) and then secure the contact closure by turning it clockwise.

Diagram showing a device with a bulb, connector, and plug (no text or symbols)

Environmental and disposal information

Symbol of a trash bin crossed with no visible text or labels

When this symbol appears on a product, this indicates that the device is subject to the European Directive 2012/19/EU. All old electrical and electronic devices must be separated from normal household waste and disposed of at designated state facilities. The correct disposal of old devices in this manner will prevent environmental pollution and human health hazards. For further information about proper disposal, contact your local authorities, waste disposal office or the shop where you bought the device.

Remember to protect the environment. Used batteries should not be disposed of in household waste. They must be taken to a collection point for old batteries. Please note that only discharged batteries may be deposited in battery

recycling bins. Care must be taken to ensure that batteries that are not fully discharged do not short circuit. Cover batteries that are not fully discharged with tape to prevent short circuits.

Dispose of the packaging in an environmentally compatible manner. Cardboard can be put out for municipal paper collections or brought to public collection points for recycling. Films and plastic used for packaging the device are collected by your local disposal services and disposed of in an environmentally compatible manner.

Conformity information

This hands-free kit meets the basic requirements and other relevant regulations of the R&TTE Directive 1999/5/EC, the EMC Directive 2004/108/EC, the Low Voltage Directive 2006/95/EC as well as the RoHS Directive 2011/65/EU.

To obtain a complete EU Declaration of Conformity, send an e-mail to the following e-mail address: [e-mail]

Warranty and servicing advice

Warranty of TARGA GmbH

This device is sold with three years warranty from the date of purchase. Please keep the original receipt in a safe place as proof of purchase. Before using your product for the first time, please read the enclosed documentation. Should any problems arise which cannot be solved in this way, please call our hotline. Please have the article number and, if available, the serial number to hand for all enquiries. If it is not possible to solve the problem on the phone, our hotline support staff will initiate further servicing procedures depending on the fault. Within the warranty period the product will be repaired or replaced free of charge as we deem appropriate. No new warranty period commences if the product is repaired or replaced. Consumables such as batteries, rechargeable batteries and lamps are not covered by the warranty.

Your statutory rights towards the seller are not affected or restricted by this warranty.

Service

Phone: 020 - 70 49 04 03

E-Mail: [e-mail]

Phone: [phone]

E-Mail: [e-mail]

Phone: [phone]

E-Mail: [e-mail]

Phone: 02 - 20 09 025

E-Mail: [e-mail]

IAN: 273505

Manufacturer

TARGA

GmbH

Coesterweg 45

59494 SOEST

GERMANY

Tartalomjegyzék

Three warning symbols: triangular warning triangle, black exclamation mark, and lightbulb with radiating lines (no text or labels)

Interior view of a black remote control box with internal components and a separate close-up of the interior (no text or symbols visible)

Diagram showing a device with a vertical component and a button, no text or symbols present

Diagram showing a device with a black bulb connected to two labeled components, one with a wire and the other with a plug (no text or symbols present)

Symbol of a trash bin crossed with diagonal lines and a horizontal bar below (no text or labels)

Pure diagram of a mechanical component with no text, numbers, or symbols visible

Diagram showing a device with a bulb, connected to a connector and a plug (no text or symbols present)

Symbol of a trash bin crossed with a diagonal line and a horizontal bar below (no text or labels)

KFZ-Ladeadapter SDC8311 82

Typenschild 83

KFZ-Ladeadapter SDC8311

Interior view of a black remote control box with internal components and a separate close-up of the interior (no text or symbols visible)

Diagram showing a device with a vertical component and a button, no text or symbols present

Diagram showing a device with a bulb, connected to a connector and a plug (no text or symbols present)

Symbol of a trash bin crossed with diagonal lines, no text or labels present