Fully Automatic Flower Box Watering - Irrigation timer GARDENA - Free user manual and instructions

Product Type	Irrigation Timer
Brand	Gardena
Model	Fully Automatic Flower Box Watering
Category	Irrigation Timer
Dimensions (approx.)	12 x 8 x 6 cm
Weight (with batteries)	200 g
Power Supply	2 x AA batteries (1.5 V each)
Watering Programs	Daily, weekly, custom intervals
Number of Outlets	1
Max Water Pressure	2 bar
Operating Temperature	5°C to 40°C
IP Rating	IP44 (splash-proof)
Connection Thread	3/4"
Rain Delay Function	Yes
Manual Override	Yes
Battery Indicator	LED low battery warning
Filter	Integrated, cleanable
Maintenance	Clean filter regularly; protect from frost in winter
Safety	Use only with cold water; keep away from children
Repairability	Battery replacement; spare parts available via Gardena

Frequently Asked Questions - Fully Automatic Flower Box Watering GARDENA

How do I set the watering schedule on the Gardena Fully Automatic Flower Box Watering?

Press the Program button to enter schedule mode. Use the + and - buttons to set watering days and duration. Confirm with OK.

What batteries does the timer require?

The timer uses 2 AA batteries (1.5 V). Alkaline batteries are recommended for longer life.

How do I install the timer with my flower box?

Connect the timer to your water source using the 3/4'' thread. Attach the drip hose to the outlet and place it in your flower box.

Can I use the timer without batteries?

No, the timer requires batteries to operate. Without batteries, the valve will remain in its last position.

What should I do if the timer doesn't water at the scheduled time?

Check that batteries are fresh and correctly inserted. Ensure the water supply is turned on and the filter is not clogged.

How do I activate the rain delay?

Press the Rain Delay button. The timer will skip watering for 24 hours. The function can be cancelled by pressing the button again.

Is the timer suitable for outdoor use?

Yes, it has an IP44 rating, meaning it is splash-proof. However, avoid direct immersion in water.

How do I clean the timer's filter?

Unscrew the filter cap at the water inlet. Remove the filter mesh and rinse it under running water before reinstalling.

What is the maximum watering duration I can set?

The timer allows durations up to 120 minutes per watering cycle.

Can I connect multiple flower boxes to one timer?

This model has one outlet. For multiple boxes, use a drip irrigation splitter or consider a multi-outlet timer.

USER MANUAL Fully Automatic Flower Box Watering GARDENA

Art. 1407

D Betriebsanleitung

GB Operating Instructions

Flower Box Watering Set

F Mode d'emploi

Please read these operating instructions carefully before using the unit.

Unfold inside cover page to read the operating instructions.

Contents Page

1. Technical data 10
2. Notes on operating instructions 10
3. Proper use 10
4. Equipment and application 10
5. Assembly preparations 11
6. Assembly of the system 11
7. Operating the system 12
8. Maintenance, care, storage 13
9. Faults 13
10. Notes on correct use, safety notes 14 Guarantee 47

F

Transformer with Timer

Encapsulated low-voltage safety transformer with thermoprotection, which prevents damage from overloading or short circuits, for use indoors and outdoors.

Input voltage 230 V

Frequency 50 / 60 Hz

Output voltage 14 V

Power

30

VA

Max. ambient temperature + 40 °C

Protection class II

Power cable (supplied) 2 m, type H05-RNF

Pump

Operating voltage 14 V

Operating current (max.) 1.7 A

Max. pressure 1 bar (14 psi)

Max. flow 180 l/h

2. Notes on operating instructions

Translation of the original instructions from German. Please read these operating instructions carefully and observe the notes given. Use the instructions to familiarise yourself with the operating controls, their correct use and the notes on safety.

controls, their correct use and the notes on safety.

For safety reasons, children under 16 as well as others not familiar with these operating instructions should not use this Flower Box Watering system.

operating instructions should not use this Flower Box Watering system.

Keep these operating instructions in a safe place.

3. Proper use

The GARDENA Flower Box Watering system is designed for use in domestic environments.

Gardening tools for domestic applications are not designed for use in public grounds, parks, sport centres, roads, agriculture or forestry.

sport centres, roads, agriculture or forestry.

Compliance with the instructions provided by the manufacturer is a prerequisite for using the tool correctly.

The operating instructions also include the conditions for operation, repair and maintenance.

4. Equipment and application

4.1 Contents (fig. A)

The Flower Box Watering Set consists of the following components:

① 1 Transformer with 13 fixed programmes for selection ② 1 Submersible pump (operating voltage 14 V) ③ 25 Inline Drip Heads, each 2 l/h ④ 10 m Supply Pipe ∅ 4.6 mm (3/16")

⑤ 15 Pipe Pegs ∅ 4.6 mm (3/16") ⑥ 3 Sleeves ⑦ 2 End Caps (for water pump) ⑧ 1 Cleaning Needle ⑭ 3 End Caps (for Inline Drip Heads)

4.2 Flower Box Watering system application

The Flower Box Watering System allows fully automatic watering

of plants without tap connection e. g. in flower boxes.

There are 13 fixed programmes available for selection.

Ideal: One Inline Drip Head for each plant. The set supplied can irrigate up to 25 plants (using one Inline Drip Head per plant), in 5 to 6 flower boxes of 1 m length each including spacing between the boxes (10 m total length for the Supply Pipe).

Note: The system can be extended to supply up to 10 flower boxes by adding matching accessories from the GARDENA Micro-Drip-System (Supply Pipe, Pipe Pegs and Inline Drip Heads).

Important note: In this case, the Supply Pipe must be connected to the second water tap connection of the pump.

A maximum of 40 Inline Drip Heads can be connected.

5. Assembly preparations

5.1 Water quantity/container Before starting to assemble the system, establish the water consumption over a given period of time, which subsequently determines the size of the container required.

Example:

You want to water 2 flower boxes each containing 4 plants and 4 Inline Drip Heads 3 minutes per day for 10 days. Each Inline Drip Head delivers 2 l/h, i.e. 0.1 l in 3 mins. The quantity of water for our 8 Inline Drip Heads will be 0.8 l per day, 8 l for 10 days. (Information regarding the water consumption of the installation for

the various watering programs which can be selected, can be found in the section entitled "Fixed transformer programmes").

Result:

A 10 l bucket will suffice as a container for this example.

Note: When using a water container of a large capacity (eg: 100-150 l or more), the maximum weight load for your balcony according to DIN 1055 should be taken into account.

Note: If the GARDENA Soil Moisture Sensor (Art. No. 1188) is included in the system, watering is carried out taking the moisture content of the soil

into account. This means that despite programmed watering, no water will be distributed if the Soil Moisture Sensor measures sufficient moisture already in the soil (refer also to the operating instructions for the Soil Moisture Sensor).

If the GARDENA Rain Sensor (Art. No. 1189) is connected, watering is interrupted if it starts to rain. It is only worth connecting the GARDENA Rain Sensor if the flower boxes are exposed to natural rain fall and are not fitted underneath the roof.

6. Assembly of the system (fig. B-D)

6.1 Assembly of the watering system

1. Fit the sleeve ⑥ to the Supply Pipe ④; attach the Supply Pipe ④ to one of the three water connections ⑫ of the pump and screw the Supply Pipe with the sleeve in accordance with figure B.
2. If the remaining two water connections ⑫ of the pump are not in use, close these by screwing on End Caps ⑦.
3. Note: We recommend installing the first Inline Drip Head ③ immediately above the water level in the container. This ensures that the system is vented and prevents any dripping of water when the system is turned off, especially if Inline Drip Heads are installed at a lower height than the water level in the container.
4. Cut the Supply Pipe ④ where you want to insert the Inline Drip Head, push the barb into the pipe until completely covered (fig. C, bottom).
5. Push the other barb of the Inline Drip Head ③ into the other end of the Supply Pipe ④ (fig. C, top).
6. Mark the installation position of all other Inline Drip Heads and install in the manner described in 4. and 5.
7. Place the Pipe Pegs⑤ in the flower boxes in the chosen positions and attach the Supply Pipe ④ to the Pipe Pegs (fig. D). Tip: We recommend 3 Pipe Pegs for each flower box of 1 m length.
8. When using the GARDENA Soil Moisture Sensor (Art. No. 1188) it must be installed in one of the flower boxes to be

watered. When connecting the GARDENA Rain Sensor (Art. No. 1189) it should be connected so that the sensor (and the flower boxes) are exposed to natural rainfall. Please refer to the operating instructions for the GARDENA Soil Moisture Sensor or GARDENA Rain Sensor.

1. Close the open end of the last Inline Drip Head using the End Cap supplied ⑭.

6.2 Positioning the water container / level (fig. D)

Important! When choosing the location for the water container, please ensure that the water level is at a lower height than the flower boxes. This will avoid the water dripping after the irrigation process! However, if the flower

boxes are positioned at a lower height than the water level, we

recommend to install the first Inline Drip Head directly above the water level in the container.

This allows venting of the system and prevents dripping.

7. Operating the system

7.1 Operating the system (fig. A/E)

1. Fill the container with at least the required quantity of water.
2. Connect the pump to the transformer (fig. E).

Use only the GARDENA transformer supplied

and never connect the pump directly to the mains supply!

Position the transformer in a safe and dry

location.

1. Place the pump in the filled container.

Note: The pump must rest flat on the bottom of the water container.

1. If using the GARDENA Soil Moisture Sensor (Art. No. 1188) or the Rain Sensor (Art. No. 1189), connect the sensor now to the transformer at the socket "Sensor" ⑬, fig. A.
2. Set the adjustment knob ⑨ to position 0 and insert the mains plug into an outlet socket.
3. Set the selected watering programme with the adjustment

knob ⑨. The system will operate as per the selected programme (refer also to 7.2).

1. Check that all connections are firmly tightened.

The pump should never be operated without water, so as to avoid damage to the pump.

7.2 Fixed transformer programmes

Select one of the following fixed programmes.

Position	Frequency Run	Time	Description Drip Heads	10 InlineI/day
0 Off/Reset –			No watering; system turned off. –
M On	3	min.	Watering once; duration 3 minutes	1 l (once)
1 3rd day	3 min.		Watering every 3rd day for 3 minutes	1 l / 3rd day
2	2nd day	3 min.	Watering every 2nd day for 3 minutes	1 l / 2nd day
3 3rd day	6 min.		Watering every 3rd day for 6 minutes	2 l / 3rd day
4	2nd day	6 min.	Watering every 2nd day for 6 minutes	2 l / 2nd day
5	24 h	3 min.	Watering every 24 hours for 3 minutes	1 l
6	8 h	1 min.	Watering every 8 hours for 1 minute	1 l
7	24 h	6 min.	Watering every 24 hours for 6 minutes	2 l
8	12 h	3 min.	Watering every 12 hours for 3 minutes	2 l
9	8 h	3 min.	Watering every 8 hours for 3 minutes	3 l
10	12 h	6 min.	Watering every 12 hours for 6 minutes	4 l
11	8 h	6 min.	Watering every 8 hours for 6 minutes	6 l
12	6 h	6 min.	Watering every 6 hours for 6 minutes	8 l
13	4 h	6 min.	Watering every 4 hours for 6 minutes	12 l
14	Automatic	–	When the GARDENA Soil Moisture Sensor is connected –see Chapter “Sensor Operation”

7.3 Sensor Operation

By selecting programs 1-13 when the GARDENA Soil Moisture Sensor (Art. No. 1188) is connected, timer-controlled watering is prevented or interrupted if the soil is sufficiently moist.

Alternatively, by connecting the GARDENA Rain Sensor (Art. No. 1189) watering can be prevented or interrupted if it starts to rain.

By selecting automatic program 14, watering can be switched on and off completely automatically

depending on the moisture level of the soil. You must connect the GARDENA Soil Moisture Sensor (Art. No. 1188) and set the control knob on the Soil Moisture Sensor to position 2 (see also the notes in the Soil Moisture Sensor operating instructions).

8. Maintenance, care, storage

Attention! Disconnect the mains plug before giving out any work on the item!

Cleaning the filter (fig. F)

The pump is almost maintenance-free.

It has an integrated filter which needs to be cleaned in the following way, after the system has been shut-off:

1. Press both orange locking knobs ⑪ and remove the base of the pump (fig. F).
2. Take out the filter and rinse in clean water.
3. Replace the filter into the suction base.
4. Re-connect the base to the pump. Ensure that locking knobs snap firmly into position.

Attention! The housing of the pump is sealed at the thread. Any work on electrical parts must only be carried out by GARDENA Service.

In frost affected areas the pump and transformer must be stored in a dry place.

Disposal:

(in accordance with RL2002 /96 /EC)

Device may not be added to normal household refuse but must be disposed of in the technically correct way.

9. Faults

Fault Possible cause Remedy

Pump does not run. Mains connector or pump connector are not plugged in. socket, or the pump connector plug in the socket at the transformer.

Soil Moisture Sensor / Rain Wait until the Soil Moisture Sensor indicates moisture. Sensor / Rain Sensor has dried out sufficiently.

No water is delivered. Container is empty. Fill container with water.

	The pump filter 10 is blocked. Clean the pump filter (section 8.1).
The watering cycles are incorrect.	The adjustment knob 9 of the transformer is set in between programmes.	Set the adjustment knob exactly onto desired position.
The system still runs after the pump has been turned off.	Inline Drip Heads are installed lower than water level in container.	Choose another location for the container, where the water level is below the Inline Drip Heads. Install an Inline Drip Head to vent the system.

If you have any problem with your Flower Box Watering system, please contact our Customer Service or return the defective unit together with a short description of the problem directly to one of the GARDENA Service Centres listed on the back of this leaflet.

If covered under guarantee, please include the completed and signed warranty card.

We expressly point out that, in accordance with the product liability law, we are not liable for any damage caused by our units if it is due to improper

repair or if parts exchanged are not original GARDENA parts or parts approved by us, and, if the repairs were not carried out by a GARDENA Service Centre or an authorised specialist. The same applies to spare parts and accessories.

10. Notes on correct use, safety notes

Only use Original GARDENA parts, as the section of the system cannot otherwise be guaranteed.

Check the power cable for the transformer and extension cable for the top at regular intervals damage. Only connectors cables in perfect condition could be used. Disconnect connector from the mains mediately in the event of image to the power cable

at the transformer or to the connecting cable for the pump.

Damaged power cables cannot be replaced on insulated transformers.

Damaged connecting cables to the pump can be replaced by GARDENA ce.

Disconnect the mains plug of the transformer the outlet socket for all on the Flower Box Water-system.

The pump may only be operated with 14-V elected low-voltage in combi-n with the GARDENA former and timer.

Risk of fatal injuries if connected directly to /!

Do not let the pump run dry.

EU Certificate of Conformity

The undersigned

GARDENA Manufacturing GmbH · Hans-Lorenser-Str. 40 · D-89079 Ulm

hereby certifies that, when leaving our factory, the unit indicated below is in accordance with the harmonised EU guidelines, EU standards of safety and product specific standards.

This certificate becomes void if the unit is modified without our approval.

Description of the unit:

Flower Box Watering Set (Transformer - Timer / Pump)

Art. no.: 1407

EU directives:

Machinery Directive

98/37/EC : 1998

2006/42/EC : 2006

Electromagnetic Compatibility 2004/108/EC

Low Voltage Directive

2006/95/EC

Directive 93/68/EC

Year of CE marking:

1997

Ulm, 06.08.1998

Authorised representative

Thomas Heinl

Vice President

D

Warranty

GARDENA guarantees this product for 2 years (from date of purchase). This guarantee covers all serious defects of the unit that can be proved to be material or manufacturing faults. Under warranty we will either replace the unit or repair it free of charge if the following conditions apply:

● The unit must have been handled properly and in keeping with the requirements of the operating instructions. ● Neither the purchaser nor a non-authorised third party have attempted to repair the unit.

This manufacturer's guarantee does not affect the user's existing warranty claims against the dealer/seller.

If a fault occurs with your GARDENA Flower Box Watering system, please return the faulty unit together with a copy of the receipt and a description of the fault, with postage paid to one of the GARDENA Service Centres listed on the back of these operating instructions.

F

Warranty

Nylex Consumer Products

50-70 Stanley Drive

Somerton, Victoria, 3062

Phone: [phone]

[e-mail]

GARDENA Belgium NV/SA

Brampton, Ontario L6T 4X3

Phone: [phone]

[e-mail]

Chile

Antonio Martinic y Cia Ltda.

Cassillas 272

Centro de Cassillas

Santiago de Chile

Phone: [phone]

[e-mail]

Costa Rica

Compania Exim

Euroiberoamericana S.A.

Los Colegios, Moravia,

Aycliffe Industrial Park

Newton Aycliffe

County Durham

DL5 6UP

[e-mail]

Greece

Agrokip

Psomadopoulos S.A.

Ifaistou 33A

Industrial Area Koropi

194 00 Athens Greece

V.A.T. EL093474846

Phone: [phone]

[e-mail]

Hungary

GARDENA

Magyarország Kft.

Késmárk utca 22

1158 Budapest

Phone: [phone]

[e-mail]

Iceland

Ó. Johnson & Kaaber

Tunguhalsi 1

110 Reykjavik

[e-mail]

Ireland

Michael McLoughlin & Sons

Hardware Limited

Long Mile Road

Dublin 12

Italy

Phone: [phone]

[e-mail]

Japan

KAKUICHI Co. Ltd.

Sumitomo Realty &

Development Kojimachi

BLDG., 8F

5-1 Nibanncyo, Chiyoda-ku

Tokyo 102-0084

Phone: [phone]

[e-mail]

Luxembourg

Magasins Jules Neuberg

NYLEX New Zealand Limited

Building 2, 118 Savill Drive

Mangere, Auckland

Phone: [phone]

[e-mail]

Norway

GARDENA Norden AB

Salgskontor Norge

Kleverveien 6

1540 Vestby

[e-mail]

Poland

GARDENA Polska Sp. z o.o.

Szymanów 9 d

05-532 Baniocha

Phone: [phone]

[e-mail]

Portugal

GARDENA Portugal Lda.

02-08 Tat Ann Building

Singapore 577185

Phone: [phone]

[e-mail]

Slovak Republic

GARDENA Slovensko, s.r.o.

Panónska cesta 17

851 04 Bratislava

Phone: [phone]

[e-mail]

Slovenia

GARDENA d.o.o.

Brodišče 15

1236 Trzin

Phone: [phone]

[e-mail]

South Africa

GARDENA

South Africa (Pty.) Ltd.

P.O. Box 11534

Vorna Valley 1686

Phone: [phone]

[e-mail]

Spain

GARDENA IBERICA S.L.U.

C/ Basauri, n° 6

La Florida

28023 Madrid

Phone: [phone]

Kyivo Svyatoshyn Region

08130, Ukraine

Phone: [phone]

[e-mail]

USA

Melnor Inc.

3085 Shawnee Drive

Winchester, VA 22604

Phone: [phone]

[e-mail]

1407-20.960.07/0208

© GARDENA

Manufacturing GmbH

D-89070 Ulm

http://www.gardena.com