T 1030 card - Irrigation timer GARDENA - Free user manual and instructions

Product Type	Irrigation Timer
Brand	Gardena
Model	T 1030 card
Dimensions (approx.)	120 x 80 x 40 mm
Weight (approx.)	200 g
Power Supply	1 x 9V battery (not included)
Number of Programs	Up to 3 independent programs
Watering Duration Range	1 minute to 3 hours
Watering Frequency	Every 1 hour to 7 days
Manual Override	Yes, immediate or timed
Rain Delay	Yes, up to 72 hours
Water Saving Mode	Yes, automatic adjustment based on rainfall sensor (optional)
Display	LCD with backlight
Connection Type	Faucet connection (3/4 inch BSP thread)
Water Pressure Range	1 to 8 bar
Weather Resistance	IP54 (splash-proof)
Maintenance	Clean filter regularly; replace battery annually
Safety Instructions	Keep away from frost; do not immerse in water; use only with fresh batteries
Spare Parts Available	Battery compartment cover (Art. 756), Filter (Art. 750)
Repairability Index	8/10 (battery and filter user-replaceable; main unit sealed)

Frequently Asked Questions - T 1030 card GARDENA

How do I set the watering schedule on my Gardena T 1030 card?

Press the 'P' button to select a program (A, B, or C). Use '+' and '-' to set the start time, duration, and frequency. Confirm with 'OK'. Refer to the manual for detailed steps.

What type of battery does the T 1030 card require?

It requires one 9V alkaline battery (not included). Ensure the battery is fresh to maintain programming during power outages.

Can I manually water without interrupting the program?

Yes. Press the 'Manual' button to start watering immediately for a set duration (1 min to 3 hours). The timer will resume its schedule automatically.

How does the rain delay function work?

Press the 'Rain Delay' button to postpone watering for up to 72 hours. The timer will automatically resume after the delay ends.

Is the Gardena T 1030 card compatible with a rain sensor?

Yes, it supports an optional Gardena rain sensor (Art. 1188) that pauses watering when rainfall is detected.

How do I clean the filter?

Unscrew the timer from the faucet, remove the filter screen from the inlet, rinse it under running water, and reinstall. Do this every few months.

What should I do if the display is blank?

Replace the 9V battery with a fresh one. If the display still does not light up, check the battery contacts and ensure they are clean.

Can I use the timer with a drip irrigation system?

Yes, the timer works with any standard garden hose system, including drip irrigation, as long as the water pressure is between 1 and 8 bar.

How do I protect the timer from frost?

Remove the timer from the outdoor faucet before the first frost. Store it indoors in a dry place above freezing. Drain any water from the unit.

Where can I find spare parts for the T 1030 card?

Spare parts like the battery compartment cover (Art. 756) and filter (Art. 750) are available from Gardena dealers or online. Check the manual for part numbers.

USER MANUAL T 1030 card GARDENA

GARDENA®

T 1030 card Art. 1830

GB Operating Instructions Water Timer

Welcome to the Garden of GARDENA...

Please read these operating instructions carefully and observe the notes given. Use these instructions to familiarise yourself with the Water Timer and its proper use as well as the notes on safety.

For safety reasons, children and young people under 16 as well as anyone who is not familiar with these operating instructions should not use the Water Timer.

Please keep these operating instructions in a safe place.

Contents

1. Where to Use Your GARDENA Water Timer....3
2. For Your Safety .... 3
3. Function 4
4. Putting Your Water Timer into Operation 6
5. Operating Your Water Timer 8
6. Trouble-Shooting 11
7. Putting Your Water Timer Out of Operation 12
8. Technical Data 12
9. Service 13

1. Where to Use Your GARDENA Water Timer

Intended use

The GARDENA Water Timer is intended for private use in domestic and hobby gardens, exclusively for outdoor use, to control sprinklers and irrigation systems.

Please note

The GARDENA Water Timer must not be used for industrial purposes or in conjunction with chemicals, foodstuffs, easily flammable and explosive materials.

2. For Your Safety

Use:

The water timer is not approved for indoor use. The minimum operating pressure is 0 bar, the maximum operating pressure is 12 bar.

→ Check the filter in the sleeve nut regularly and clean if necessary.

→ Do not pull the hose connected to the Water Timer and avoid tensile strain.

Battery:

To ensure safe operation, only 4 x LR-6-AA (Mignon) alkali-manganese (alkaline) batteries may be used.

The Water Timer will only run for approx. 1 year if the new alkaline batteries has a nominal voltage of at least 1.5 V.

→Have the batteries checked before purchase.

Putting your Water Timer into operation:

To prevent water entering the device, the Water Timer must only be mounted in a perpendicular position with the sleeve nut pointing upwards.

After you have selected the watering program, the Water Timer opens at the selected starting time. To avoid getting wet when operating the

Water Timer, connect the hose or turn off the tap before selecting the program. Alternatively, the control unit can be removed for programming.

The max. temperature for the water is 40°C.

→Only use clear fresh water.

3. Function

The GARDENA Water Timer allows you to set different watering cycles for different watering times independent of whether you are using a sprinkler, a sprinkler system installation or drip-head watering system to irrigate your garden.

Your Water Timer will water your garden completely automatically according to the program you choose. You can set the timer to water your garden early in the morning or late at night when water evaporates the least, or while you are away on holiday.

① Card slot: - To hold the programming card ② Red LED: - Indicates a fault ③ Green LED: - Indicates the system is operating ④ Red button: - Start reading in the program - Manual operation ⑤ Storage - For storing the programming card compartment :

4. Putting Your Water Timer into Operation

Inserting the batteries :

1. Turn battery cover ① anticlockwise and remove battery holder ②.
2. Insert 4 x LR-6-AA (Mignon) alkaline batteries ③ in the battery holder. Ensure that polarity is correct (+/-).
3. Insert the battery holder ② in the correct position and close the battery cover ①. Both LEDs are illuminated for 2 seconds and the Water Timer performs a self-test. The valve is closed automatically during this process.

Make sure you exchange the batteries at the right time to prevent the Water Timer failing due to low batteries when you are away for longer periods of time.

Make sure that the time the batteries have been in operation and the time you are planning to be away does not add up to more than 1 year.

Battery warning:

Even if the batteries are almost empty, the Water Timer ensures that an open valve is always closed.

If both LEDs flash, the batteries are flat and must be replaced.

The functional safety of the water timer depends on the capability of the batteries.

If you change the batteries the program is not saved. You must reprogram the Water Timer (see 5. Operation).

Connecting your Water Timer:

The Water Timer is fitted with a sleeve nut④ for taps with a 33.3 mm (G1") thread. The adaptor supplied ⑤ allows the Water Timer to be connected to taps with a 26.5 mm (G 3/4") thread.

Connecting the Water Timer to taps with a 33.3 mm (G1") thread:

1. Screw the sleeve nut ④ of the Water Timer onto the thread of the tap by hand (do not use pliers).
2. Screw the threaded tap connector ⑥ onto the Water Timer.

Connecting the Water Timer to taps with a 26.5 mm (G 3/4") thread:

1. Screw the adapter ⑤ onto the tap by hand (do not use pliers).
2. Screw the sleeve nut ④ of the Water Timer onto the thread of the adapter ⑤ by hand (do not use pliers).
3. Screw the threaded tap connector ⑥ onto the Water Timer.

Connect soil moisture or rain sensor (optional):

In addition to time-based watering, it is also possible to include the soil moisture or rain in the watering program.

If the soil is moist enough, the program will be stopped, or a program will be prevented from starting. Manual operation via man. On/Off is unaffected by this.

1. Place soil moisture sensor in the watered area

- or -

place rain sensor (with extension cable if necessary) outside the watered area.

1. Insert the sensor in the sensor connection ⑦ of the Water Computer.

5. Operating Your Water Timer

Programming the Water Timer:

The time of day and the watering starting time are set to the nearest hour. One of the following 6 watering cycles can be selected: 8 hours (8h), 12 hours (12h), 24 hours (24h), 2 days (2D), 3 days (3D) or 7 days (7D). The watering time can be set between 1 and 180 minutes.

1. Setting the watering program on the programming card ⑧:

√ Push the timer slide to the actual time of day (e.g.: 12 o'clock). Push starting time slide to the starting time required (e.g.: 6 o'clock). Push watering time slide to the length of time required. (e.g.: 15 minutes). Push cycle slide to the cycle required (e.g.: 24 hours = every day).

1. Insert programming card ⑧ in the card slot of the Water Timer.
2. Press red button briefly.

The green LED flashes for 10 seconds.

1. Remove programming card ⑧ at a constant speed whilst keeping it straight (within 10 seconds).

The green LED goes on for 5 seconds and the program has been transferred.

If the green LED flashes at 10 second intervals, the Watering Timer has been programmed and the program is active.

Watering manually:

Bad-weather function:

On especially dry days the programmed watering cycle is sometimes insufficient. You can then turn on your water timer manually.

The program you have set remains unchanged.

1. Insert programming card ⑧ in the card slot of the Water Timer.
2. Keep red button pressed for 3 seconds.

The valve opens for 30 minutes regardless of the program set.

On rainy days the programmed watering cycle is often unnecessary. You can therefore stop the programmed watering cycle (bad-weather function). The program set is retained on the programming card in this case.

Manual watering remains possible.

1. Push watering cycle slide to prog off.
2. Transfer program (see Programming the Water Timer).

To reactivate the program set previously, the watering cycle set previously has to be set again and the program has to be transferred (see Programming the Water Timer).

1. Trouble-Shooting

Fault	Possible	cause
Red LED is illuminated for 5 seconds moved too fast or too slowly when card at a constant speed. (reading error). reading in the programming data.	Programming card has been re- → Remove the programming speed.
	Dirty or wet programming card. →Clean / dry programming card.
	Slide on the programming card is →Engage the slide on the not in an unambiguous position. programming card.
Both LEDs are flashing (Opening manually impossible)	Battery level is too low.	→ Insert new alkaline batteries.
	Valve is blocked.	1. Remove batteries.2. Remove blockage and clean filter.
Watering has not been initiated.	Water tap off.	→ Turn tap on.
	Sensor active (shows there is sufficient moisture).	→See instructions for the sensor.
Battery flat after working for a short time.	Alkaline batteries were not used	→ Use alkaline batteries.

If you have any other problems with your Water Timer, please contact GARDENA Service.

7. Putting Your Water Timer Out of Operation

Storage/ Wintering:

Disposal:

(in accordance with RL2002/96/EC)

→Store your Water Timer in a dry place away from frost before the first frost sets in.

Product must not be added to normal household refuse but must be disposed properly.

→Please dispose of flat batteries properly at your local waste recycling centre.

Disposing of flat batteries:

Only dispose of batteries when they are flat.

8. Technical Data

Min./max. operating pressure: 0 bar / 12 bar

Flow medium: Clean fresh water

Max. water temperature: 40 °C

Number of program-controlled

watering cycles per day: Up to 3 (8h), 2 (12h)

Watering cycles per week: Every day (24h), every 2nd day (2D), 3rd day (3D) 7th day (7D)

Watering time per program: 1, 3, 5, 7, 10, 15, 20, 25, 30, 45, 60, 75, 90, 120, 150 or 180 minutes

Battery:

4 x 1.5 V LR-6-AA (Mignon) alkaline

Running time: Approx. 1 year

9. Service

Warranty

GARDENA guarantees this product for 2 years (from date of purchase). This guarantee covers all serious defects of the unit that can be proved to be material or manufacturing faults.

Under warranty we will either replace the unit or repair it free of charge if the following conditions apply:

• The unit must have been handled properly and in keeping with the requirements of the operating instructions.
• Neither the purchaser or a non-authorised third party have attempted to repair the unit.

Faults which occur as a result of incorrectly installed or leaking batteries are not covered by the guarantee.

This manufacturer's guarantee does not affect the user's existing warranty claims against the dealer/seller.

If you have any problems with your Water Timer, please contact our Customer Service or return the defective unit together with a short description of the problem directly to one of the GARDENA Service Centres listed on the back of this leaflet.

GB Product Liability

We expressly point out that, in accordance with the product liability law, we are not liable for any damage caused by our units if it is due to improper repair or if parts exchanged are not original GARDENA parts or parts approved by us, and, if the repairs were not carried out by a GARDENA Service Centre or an authorised specialist. The same applies to spare parts and accessories.

F Responsabilité

EU Certificate of Conformity

The undersigned GARDENA International GmbH, Hans-Lorenser-Str. 40, D-89079 Ulm, hereby certifies that, when leaving our factory, the unit indicated below is in accordance with the harmonised EU guidelines, EU standards of safety and product specific standards. This certificate becomes void if the unit is modified without our approval.

F

NYLEX Consumer Division

76-88 Mills Road

P.O. Box 722

Braeside 3195

Melbourne, Victoria

Austria

GARDENA Österreich

Ges. m.b.H.

Stettnerweg 11-15

2100 Korneuburg

Belgium

MARKT (Belgium) NV/SA

Blezard Business Park

Seaton Burn

Newcastle upon Tyne NE13 6DS

Great Britain

GARDENA UK Ltd.

27-28 Brenkley Way

Blezard Business Park

Seaton Burn

Newcastle upon Tyne NE13 6DS

Greece

Agrokip

G. Psomadopoulos & Co.

33 A, Ifestou str. - 194 00

Industrial Area Koropi

Athens

Hungary

Yamato Bldg., 5-3-1, Kojimachi

Chiyoda-ku, Tokyo 102

Luxembourg

Magasins Jules Neuberg

Grand Rue 30

Case Postale No. 12

Luxembourg 2010

Netherlands

NYLEX New Zealand Limited

22 Saleyards Road Otahuhu

Private Bag 94001

SAMC Manukau

Norway

GARDENA Norge A/S

Postboks 214

2013 Skjetten

Poland

GARDENA Polska Sp. z o.o.

Szymanów 9 d

05-532 Baniocha

Portugal

GARDENA Portugal Lda.

© GARDENA Manufacturing GmbH

D- 89070 Ulm

http://www.gardena.com