CR7BK - Alarm Clock BLAUPUNKT - Free user manual and instructions

Product Type	Alarm Clock Radio
Brand	Blaupunkt
Model	CR7BK
Color	Black
Power Supply	AC 100-240V ~ 50/60Hz, 5W
Backup Battery	1 x CR2032 (coin cell, not included)
Display Type	LED digital clock
Time Format	12/24 hour selectable
Alarm Modes	Dual alarm (weekday/weekend settings)
Alarm Source	Buzzer or radio (auto switch)
Snooze Duration	9 minutes (adjustable in settings)
Sleep Timer	Up to 90 minutes
Radio Bands	AM (520-1710 kHz) / FM (87.5-108 MHz)
Preset Stations	10 AM, 10 FM
Audio Output	Built-in mono speaker, 3.5 mm headphone jack
Volume Control	Rotary knob for alarm and radio
Dim Level	High / Low / Off (auto dim by ambient light)
Dimensions (W x H x D)	20.5 x 10.0 x 12.5 cm
Weight	0.45 kg
Material	Plastic casing with metal accents
Safety Features	Low voltage operation, overheat protection
Maintenance	Clean with a soft, dry cloth; do not use liquids
Spare Parts / Repairability	Backup battery accessible; other parts not user-serviceable

Frequently Asked Questions - CR7BK BLAUPUNKT

How do I set the time on my Blaupunkt CR7BK?

Press and hold the TIME SET button for 3 seconds. Use the HOUR and MIN buttons to adjust. Press TIME SET again to confirm.

How do I set an alarm?

Press the ALARM 1 or ALARM 2 button. Use HOUR and MIN to set the time. Select alarm source (buzzer or radio) with the SOURCE button. Press ALARM to save.

How can I change the alarm from buzzer to radio?

When setting the alarm, press the SOURCE/ALARM button to toggle between buzzer and radio. If radio is selected, it will play the last tuned station.

How do I use the snooze function?

When the alarm sounds, press the SNOOZE/DIMMER button. The alarm will silence and repeat after 9 minutes. You can adjust the snooze duration in the settings menu.

Why is my clock display dim or flickering?

This may indicate low backup battery. Replace the CR2032 battery on the bottom. Ensure the AC power is connected. The dim level can also be adjusted via the DIMMER button.

How do I set the sleep timer?

Press the SLEEP button repeatedly to select 10, 20, 30, 60, or 90 minutes. The radio will play and then shut off automatically after the set time.

Can I use the radio without an antenna?

The CR7BK has a built-in ferrite antenna for AM and a wire antenna for FM. For best reception, fully extend the FM wire antenna and rotate the unit for AM.

How do I reset the clock to factory settings?

Press and hold the CLOCK button while inserting the backup battery or plugging in AC power. Use a paper clip to press the RESET hole if available.

Does the alarm work during a power outage?

The backup battery retains time and alarm settings, but the alarm will not sound because the radio and buzzer require AC power. The display will dim to save battery.

How do I clean my alarm clock?

Unplug the unit and wipe with a soft, dry cloth. Do not use abrasive cleaners or liquids. Keep the ventilation slots free of dust.

USER MANUAL CR7BK BLAUPUNKT

This safety and operating instruction should be retained for future reference. The apparatus should not be exposed to dripping or splashing or placed in a humid atmosphere such as a bathroom. Do not install the product in the following areas: places exposed to direct sunlight or close to radiators; on top of other stereo equipment that radiate too much heat; blocking ventilation or in a dusty area; areas where there is constant vibration; humid or moist places. Do not place near candles or other naked flames. Operate the product only as instructed in this manual. Before turning on the power for the first time, make sure the power adaptor is properly connected.

For safety reasons, do not remove any covers or attempt to gain access to the inside of the product. Refer any servicing to qualified personnel.

Do not attempt to remove any screws, or open the casing of the unit; there are no user serviceable parts inside. Refer all servicing to qualified service personnel.

SAFETY INSTRUCTIONS

1. Read Instructions - All the safety and operating instructions must be read before the product is operated.
2. Retain Instructions - The safety and operating instructions should be kept with the product for future reference.
3. Heed warnings - All warnings on the product and in the operating instructions should be adhered to.
4. Follow instructions - All operating and users' instructions should be followed.
5. Water and moisture - To reduce the risk of fire or electric shock, do not expose the product to rain, dripping, splashing or excessive moisture such as in a sauna or bathroom. Do not use this product near water, for example, near a bathtub, washbowl, kitchen sink, laundry tub, in a wet basement or near a swimming pool (or similar).
6. Object and Liquid Entry - Never push objects of any kind into this product through openings, as they may touch dangerous voltage points or short-circuit parts that could result in a fire or electric shock. Never spill liquid of any kind on the product. Do not place any object containing liquid on top of the product.
7. Servicing - Do not attempt to service this product yourself, as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.
8. Replacement parts - When replacement parts are required, ensure that the service technician has used replacement parts specified by the manufacturer or have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock or other hazards.
9. Place your clock radio on a stable surface, away from sources of direct sunlight or excessive heat or moisture.
10. Protect your furniture when placing your units on a natural wood and lacquered finish by using a cloth or protective material between it and the furniture.
11. Clean your unit with a soft cloth moistened only with mild soap and water. Stronger agents such as benzene, thinner or similar materials can damage the surface of the unit. Make sure the unit is unplugged before cleaning.

12. Battery

1) The batteries must not be exposed to excessive heat such as sunshine, fire or the like.

2) The batteries should be drawn to the environmental aspects of battery disposal.

3) Battery usage CAUTION - to prevent battery leakage which may result in body injuries, property damage, or damage to the apparatus:

- Install all batteries correctly, + and - as marked on the apparatus.

- Remove batteries when the unit is not used for a long time.

WARNING

This appliance is not intended for use by persons (including children) with reduced physical sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.

Children should be supervised to ensure that they do not play with the appliance.

1. The apparatus must not be exposed to dripping or splashing and that objects filled with liquids, such as vases, must not be placed on the apparatus.
2. To prevent fire or shock hazard, do not expose this equipment to hot places, rain, moisture or dust.
3. Do not locate this unit near any water sources e.g. taps, bathtubs, washing machines or swimming pools. Ensure that you place the unit on a dry, stable surface.
4. Do not place this unit close to a strong magnetic field.
5. Do not place the unit on a amplifier or receiver.
6. Do not place this unit in a damp area as the moisture will affect the life of electric components.
7. If the clock is brought directly from a cold to a warm location, or is placed in a damp room, moisture may condense on the lens inside the player. If this occurs, the system will not operate properly. Please leave the system turned on for about an hour until the moisture evaporates.
8. Do not attempt to clean the unit with chemical solvents as this might damage the finish. Wipe with a clean, dry or slightly damp cloth.

NOTICE

This product complies with the radio interference requirements of the European Community.

Your product is designed and manufactured with high quality materials and components, which can be recycled and reused.

When this crossed-out wheeled bin symbol is attached to a product, it means that the product is covered by the European Directive 2002/96/EC. Please inform yourself about the local separate collection system for electrical and electronic products. Please act according to your local rules and do not dispose of your old products with your normal household waste. Correct disposal of your old product helps to prevent potential negative consequences for the environment and human health.

Your product contains batteries covered by the European Directive 2006/66/EC, which cannot be disposed of with normal household waste. Please inform yourself about the local rules on separate collection of batteries because correct disposal helps to prevent negative consequences for the environment and human health.

Environmental information

All unnecessary packaging has been omitted. We have tried to make the packaging easy to separate into three materials: cardboard (box), polystyrene foam (buffer) and polyethylene (bags, protective foam sheet). Your system consists of materials which can be recycled and reused if disassembled by a specialized company. Please observe the local regulations regarding the disposal of packaging materials, exhausted batteries and old equipment.

Recording and playback of material might require consent. See Copyright Act 1956 and The Performer's Protection Acts 1958 to 1972.

INSTALLATION

Plug the AC/DC adaptor into an AC household outlet, and then plug the DC jack into the back of the unit. Your clock radio is ready to work for you.

BACKUP BATTERY INSTALLATION

Your clock radio requires one CR2032 lithium battery (not included) to provide backup power to the clock in the event of a temporary power interruption.

1. Place your unit face down on a flat surface.
2. Slide and remove the battery cover at the bottom of your unit.
3. Insert one new CR2032 lithium battery into the battery compartment with the "+" side facing up as indicated.
4. Replace the battery cover.

If AC power is interrupted, the LED display will go off and both the radio and the alarm will not function. The backup battery will keep the time and all settings of your unit. Make sure a fresh CR2032 lithium battery is used. A fresh CR2032 battery could backup your clock continuously for around 3 days.

SETTING TIME, 12/24HR TIME AND THE SNOOZE DURATION

1. Press SET once, the hour digits flash. Press ▲ or ▼ to set the current hour (hold to advance rapidly).
2. Press SET again, the minute digits flash. Press ▲ or ▼ to set minutes. (hold to advance rapidly).
3. Press SET again, the display shows "24H" and flashes. Press ▲ or ▼ to select "12H" or "24H" time format.
4. Press SET again, the display shows "05" and flashes. Press ▲ or ▼ to select your snooze time from 5 to 60 minutes.
5. Press SET again or if no key is pressed in approx. 10 seconds to exit the setting mode.

Note: when 12-hour time format is selected, the P (PM) LED will appear at the lower middle part of the time display to indicate the afternoon time; there is no AM indicator.

SETTING THE ALARMS

1. Press AL 1.2 once, the A1 LED and the hour digits flash. Press ▲ or ▼ to set the alarm 1 hour. (hold to advance rapidly).
2. Press AL 1.2 again to adjust minutes. Press ▲ or ▼ to set the alarm 1 minutes. (hold to advance rapidly).
3. Press AL 1.2 again, LED displays "OFF" (alarm off). To select wake to sound sources, press ▲ or ▼ to select :-

rd = wake-by-radio, bu = wake-by-buzzer, OFF = alarm off

1. Press AL 1.2 again, the A2 LED and the hour digits flash. Press ▲ or ▼ to set the alarm 2 hour. Repeat step 2) and 3) to set alarm 2.
2. Press AL1.2 again or no button is pressed in around 10 seconds to exit alarm setting mode. When wake-by-radio or wake-by-buzzer is selected, the related alarm is turned on, indicated by appearance of the A1 and / or the A2 LED on the left side of the display.

Note: Alarm function can only be operated at AC mode only.

STOP AND RESET THE ALARM TO COME ON THE NEXT DAY

When alarm 1 or 2 is sounding, the related A1 or A2 LED flashes. Press the RADIO/ SLEEP or AL 1.2 once to stop the alarm and reset it to come on the following day. After that, A1 or A2 icon stays on the display.

SNOOZE OPERATION (default snooze duration is 5 minutes)

When alarm is sounding, press Zz once, the alarm will be silenced and come on again after the set snooze duration.

Note: If your second alarm activates while the first alarm is sounding or it is in the snooze mode, the second alarm overrides the first alarm (the first alarm is reset to come on the next day).

USING THE HI-LO DIMMER

Press Zz•☀️ to adjust the brightness (HI/ LO/OFF) of the LED display. This can only be done when the radio is off or the unit is not sounding.

SETTING UP THE FM ANTENNA

Extend the FM wire antenna fully and vary the direction for the best FM reception. Do not strip, alter, or attach to other antennas.

LISTENING TO THE FM RADIO

1. To turn on the radio, press RADIO/SLEEP once. The display shows "ON" and then shows the radio frequency readings in MHz.
2. Press ▲ / ▼ to tune the radio to a desired station. Press and hold ▲ / ▼ to scan for the next clear station.
3. To adjust the volume, press VOL once. The display shows "L07". Press ▲ / ▼ to adjust volume from L01 (minimum) to L15 (maximum).
4. Press ⏻ to turn off the radio.

Remark: Keep your radio away from fluorescent lamps or other electronic devices, which may cause interference to the radio.

USING THE PRESET MEMORY

This clock radio features 10 preset memories of FM stations. These allow you to preset your favorite stations and access them quickly.

1. Turn on the radio and select a radio station you like to memorize.
2. Press and hold the SET until MEM LED appears and "01" flashes. Press SET once to store Memory 1.
3. Press ▲ or ▼ to select another station you like to memorize. Then press and hold SET until MEM LED appears and "01" flashes. Press ▲ or ▼ once, "02" appears. Press SET once to store Memory 02.
4. Repeat Steps 2 to 3 to preset memories 3 through 10.
5. To access a preset station at any time, simply press the SET once at a time while the radio is on.
6. To edit a preset station, select another station and then repeat Step 2 to 4. This overrides the original settings.

USING THE SLEEP TIMER

1. Press the RADIO/SLEEP twice to enter the sleep mode. The SL (SLEEP) LED and the sleep time "05" (5 minutes) will flash on the display.
2. Press the RADIO/SLEEP again as needed to adjust the sleep timer from 5, 15, 30, 45, 60, 75, 90 or OFF.
3. When the display changes back to show the time, simply press the RADIO/SLEEP twice to show the sleep time remaining.
4. The radio will play for the programmed sleep time and then turn off automatically.
5. To turn off the radio before the sleep time has elapsed, press Z_z once.

TROUBLESHOOTING

If your clock displays irrelevant time or does not function properly, which may be caused by electro-static discharge or other interference, unplug the DC jack to disconnect the AC power (and remove the backup battery). The clock radio will be reset to default settings and you need to set it again.

CARE OF YOUR PRODUCT

1. Place your clock radio on a stable surface, away from sources of direct sunlight or excessive heat or moisture.
2. Protect your furniture when placing your units on a natural wood and lacquered finish by using a cloth or protective material between it and the furniture.
3. Clean your unit with a soft cloth moistened only with mild soap and water. Stronger agents such as Benzene, thinner or similar materials can damage the surface of the unit. Make sure the unit is unplugged before cleaning.
4. If the unit is not to be used for a prolonged period, such as a month or longer, remove the batteries to prevent possible corrosion. Should the battery compartment become corroded or dirty, clean the compartment thoroughly and replace the batteries.

SPECIFICATIONS

Alarm duration: 1 hour (3-minute on, 9-minute off interval)

Snooze duration: 5 to 60 minutes

Sleep timer selections: 5, 15, 30, 45, 60, 75, 90 minutes to OFF

Volume: L01 (minimum) to L15 (maximum)

Preset memories of radio: 10

Default settings:

Time format: 24 hour

Time: 0:00

Alarm 1 and 2: 6:00

Volume: L07 (Level 7)

Snooze duration: 05 (5 minutes)

IMPORTANT INFORMATION

Competence Centre Audio

2N-Everpol Sp. z o.o.

ul. Puławska 403A

02-801 Warsaw, Poland

phone: [phone]

e-mail: [e-mail]

www.blaupunkt.com

In case of questions or problems

please contact our service.

Tel. [phone]

E-mail: [e-mail]

All rights reserved. All brand names are registered trademarks of their

respective owners. Specifications are subject to change without prior notice.

Enjoy it.