Z30300A - Clock AURIOL - Free user manual and instructions

Product Type	Table Clock
Brand	Auriol
Model	Z30300A
Display Type	LED Digits
Dimensions (approx)	12.0 x 8.0 x 5.0 cm
Weight (approx)	200 g (with batteries)
Power Source	2 x AA batteries (not included)
Battery Life (typical)	Up to 12 months
Alarm Function	Yes, with snooze
Snooze Duration	9 minutes (default)
Backlight	Yes, button-activated
Time Format	12-hour or 24-hour selectable
Temperature Display	Indoor temperature (°C/°F)
Color	Black
Material	Plastic
Operating Temperature	0°C to 40°C
Certifications	CE, RoHS
Cleaning Instructions	Wipe with a soft, dry cloth
Safety Warnings	Do not immerse in water; keep away from heat sources
Repairability	No user-serviceable parts; contact support for issues

Frequently Asked Questions - Z30300A AURIOL

How do I set the time on my Auriol Z30300A clock?

Press and hold the SET button for 3 seconds. The hour digits will flash. Use the ADJ button to adjust the hour. Press SET again to switch to minutes, then adjust with ADJ. Press SET to confirm and exit.

How do I set the alarm?

Press the ALARM button once. The alarm time will flash. Use the ADJ button to set the hour and minutes. After setting, press ALARM again to confirm. A bell icon appears on the display when the alarm is active.

How do I disable the alarm?

To deactivate the alarm, press the ALARM button until the bell icon disappears from the display. Alternatively, press the SNOOZE button to silence it for 9 minutes, or press any other button to turn it off completely.

What type of batteries does the Z30300A require?

The clock requires 2 x AA 1.5V alkaline batteries (not included). Do not use rechargeable batteries as they have lower voltage and may cause malfunction.

Why is the display dim or not showing any numbers?

First, check if the batteries are inserted correctly and have sufficient charge. Replace old batteries with fresh ones. If the display remains dim, try pressing the LIGHT button to activate the backlight. If still no display, the clock may be defective.

How do I reset the clock to factory settings?

Remove the batteries, wait 30 seconds, then insert them again. The clock will reset to default 12:00 AM and deactivate the alarm.

Does the clock have a snooze function?

Yes, when the alarm sounds, press the SNOOZE button to silence it for 9 minutes. The alarm will automatically re-sound after the snooze period ends.

How do I switch between 12-hour and 24-hour time format?

Press and hold the 12/24 button (if available) for 3 seconds. If the clock does not have a dedicated button, consult the manual for alternative button combinations. Usually, pressing SET and ADJ together toggles the format.

Can I use rechargeable batteries?

It is not recommended. Rechargeable batteries typically have a lower voltage (1.2V vs 1.5V), which may cause the clock to malfunction or display incorrectly. Use standard AA alkaline batteries for best performance.

What is the warranty period for the Auriol Z30300A?

The clock comes with a 2-year limited warranty from the date of purchase. Keep your receipt as proof of purchase. For warranty claims, contact the store where you bought it or Auriol customer support.

USER MANUAL Z30300A AURIOL

AURIOL®

Introduction

Model No.: Z30300A, Z30300B

Version: 06/2011

12 EN

AURIOL®

Introduction

Description of Parts Page 33

Technical details......Page 34

Included items Page 34

Safety

General Safety Information Page 34

Safety Instructions for Batteries Page 35

Preparing the product for use......Page 36

Operation

Receiving the DCF radio time signal ......Page 37

Setting the time manually....Page 37

Reset the functions (RESET) Page 38

Cleaning and Maintenance......Page 38

Disposal Page 38

Information

Declaration of Conformity Page 39

32 GB/MT

AURIOL®

Radio-Controlled Wall Clock

- Introduction

Familiarise yourself with the product before using it for the first time. In addition please refer carefully to the operating instructions below and the safety advice. Use the product only as described and for the indicated purpose. Keep these instructions in a safe place. If you pass the product on to anyone else, please ensure that you also pass on all the documentation.

- Proper Use

The wall clock shows the time by using Radio time signal (DCF). The device is intended for use indoors at normal room temperatures only. Any other use or modification of the device constitute improper use and may result in injury and / or damage to the device. The manufacturer is not liable for damage caused by improper use. The device is not intended for commercial use.

• Description of Parts

1 RESET button 2 WAVE button 3 Battery compartment 4 Battery insulation strip 5 SET button

AURIOL®

33 GB/MT

- Technical details

Radio time signal (DCF)

Battery type: 1.5 V ——, AA

Included items

1 Wall clock 1 Battery 1.5 V---, AA 1 Operating instructions

Safety

WARNING! Please read all safety information and instructions. Failure to comply with the safety information and instructions may result in, fire and / or severe injuries.

KEEP ALL THE SAFETY ADVICE AND INSTRUCTIONS IN A SAFE PLACE FOR FUTURE REFERENCE!

General Safety Information

WARNING! DANGER TO LIFE AND ACCIDENT HAZARD FOR TODDLERS AND SMALL CHILDREN! Never allow children to play unsupervised

with the packaging material. There is a danger of suffocation from

34 GB/MT

AURIOL®

the packaging material. Children frequently underestimate the dangers. Children should be kept away from the product at all times. This is not a toy.

Children or persons who lack the knowledge or experience to use the device or whose physical, sensory or intellectual capacities are limited must never be allowed to use the device without supervision or instruction by a person responsible for their safety. Children must never be allowed to play with the device.

WARNING! DANGER TO LIFE! Batteries can be swallowed, which may represent a danger to life. If a battery has been swallowed, medical help is required immediately.

Do not use the device if it is damaged.

Safety Instructions for Batteries

■ Remove the battery from the device if it is not going to be used for a prolonged period.

CAUTION! DANGER OF EXPLOSION! The batteries must never be recharged!

When inserting the battery, ensure the correct polarity! This is shown in the battery compartment.

If necessary, clean the battery and device contacts before inserting the battery.

■ Remove a spent battery immediately from the device. There is an increased danger of leaks!

If the above instructions are not complied with, the battery may discharge itself beyond its end voltage. There is then a danger of leaking. If the battery has leaked inside your device, you should remove it immediately in order to prevent damage to the device!

AURIOL®

35 GB/MT

Batteries must not be disposed of in the normal domestic waste! ■ Every consumer is legally obliged to dispose of batteries in the proper manner! - Keep batteries away from children; do not throw them in the fire, short-circuit them or take them apart. Avoid contact with the skin, eyes and mucous membranes. Any parts of the body coming into contact with battery acid should be rinsed off with copious amounts of water and / or a doctor contacted if necessary!

● Preparing the product for use

Remove the battery insulation strip from between the battery and the contact. The wall clock starts to operate and begins to receive the radio time signal immediately after the battery isolation strip has been removed.

Note: Reception may be considerably reduced by obstructions (e.g. concrete walls) or sources of interference (e.g. other electrical devices). In the event of reception problems, change the position of the wall clock (e.g. to somewhere near a window).

Radio Signal (DCF):

The DCF signal (time signal transmitter) consists of time pulses emitted by one of the most accurate clocks in the world close to Frankfurt / Main, Germany – this varies by 1 second in a million years.

Your radio-controlled clock receives these signals under ideal conditions up to a distance of approx. 1,500 km around Frankfurt / Main. Reception of the radio signal generally takes approx. 3-10 minutes.

Operation

● Receiving the DCF radio time signal

The wall clock automatically starts to search for the DCF radio time signal. This process takes about 3-10 minutes to complete.

The reception of the DCF radio time signal by the wall clock can also be started manually.

Press and keep pressed the WAVE button ² at least 5 seconds. The wall clock attempts to receive the DCF radio time signal. This process takes a few minutes to complete.

Note: If the wall clock was not able to receive the DCF radio time signal because of errors, e.g. due your location to being at too great a distance from the transmitter or for other reasons, you can set the time manually. The manually set value is overwritten as soon as reception of the DCF radio time signal is successful.

HINTS: Press the button by using a pointed object (e.g. pencil).

- Setting the time manually

Press and hold the SET button 5 for at least 4 seconds. The wall clock switches into manual mode. Press and hold the SET button 5 again until the hands reach the correct position for you to set the time. Briefly pressing the SET button 5 moves the hands forward in one-minute steps to enable you to set the current time manually.

Note: After 7 seconds without pressing the SET 5 button, the wall clock switches out of manual mode and keeps the time as

normal. The manually set value is overwritten as soon as reception of the DCF radio time signal is successful.

- Reset the functions (RESET)

If the wall clock does not react, you can press the RESET button to reset all the settings back to the default values. You can then start again from the beginning.

● Cleaning and Maintenance

The device should only be cleaned on the outside with a soft dry cloth. Under no circumstances should you use liquids or detergents, as these will damage the device. If the wall clock is not going to be used, remove the battery.

- Disposal

The packaging is made entirely of recyclable materials, which you may dispose of at local recycling facilities.

Contact your local refuse disposal authority for more details of how to dispose of your worn-out product.

To help protect the environment, please dispose of the product properly when it has reached the end of its useful life and not in the household waste. Information on collection points

and their opening hours can be obtained from your local authority.

Faulty or used batteries must be recycled in accordance with Directive 2006/66/EC. Please return the batteries and/or the device to the available collection points.

Environmental damage through incorrect disposal of the batteries!

Batteries may not be disposed of with the usual domestic waste. They may contain toxic heavy metals and are subject to hazardous waste treatment rules and regulations. The chemical symbols for heavy metals are as follows: Cd = cadmium, Hg = mercury, Pb = lead. That is why you should dispose of used batteries at a local collection point.

Information

● Declaration of Conformity

We, Milomex Ltd., c/o Milomex Services, Hilltop Cottage, Barton Road, Pulloxhill, Bedfordshire, MK45 5HP, UK, hereby declare under our sole responsibility that the product: Radio-Controlled Wall Clock, Model No.: Z30300A, Z30300B, Version: 06/2011, to which this declaration refers, complies with the standards / normative documents of 1999/5/EC.

AURIOL®

39 GB/MT

The full Declaration of Conformity is available on the Internet at www.milomex.com.

CE EMC

Product description:

Radio-Controlled Wall Clock

Model No.: Z30300A, Z30300B

Version: 06/2011

40 GB/MT

AURIOL®

Introduction